CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Hi-Lift Jack

13-C JEEP WRANGLER JK & JL HI-LIFT HOOD MOUNT 13-C JEEP WRANGLER JK & JL HI-LIFT HOOD MOUNT
Online
$88.89for EA
Mfr PN: HM-900
Stock: 25
Mount your Hi-Lift Jack within easy reach on your Jeep Wrangler! Mounts directly to existing hood hinge holes, no drilling required. 6061-T6 structural anodized aluminum for strength, durability, and a clean look.
Online
$88.89for EA
Mfr PN: HM-900
Stock: 25

Online
$126.94for EA
Mfr PN: TT-1000
Stock: 23

2020+ JEEP GLADIATOR HI-LIFT JACK BLACK BED MOUNT MUST HAVE OEM BED RAIL SYSTEM 2020+ JEEP GLADIATOR HI-LIFT JACK BLACK BED MOUNT MUST HAVE OEM BED RAIL SYSTEM
Online
$85.02for EA
Mfr PN: JGBM-100
Stock: 20
Conveniently mount and store your Hi-Lift Jack on the bed rail of a Jeep Gladiator. Installation is simple using the Jeep Gladiator OEM bed rail system.* No drilling required. Constructed of 6061-T6 anodized structural aluminum for strength, durability, and a clean look. Adaptable for use of “quick fist” type clamps for mounting of tools and equipment, such as an axe or shovel. *Note: Bed rails are not standard equipment on all Jeep Gladiator models.
Online
$85.02for EA
Mfr PN: JGBM-100
Stock: 20

3 x 15 30,000LBS RECOVERY STRAP 3 x 15 30,000LBS RECOVERY STRAP
Online
$36.46for EA
Mfr PN: STRP-315
Stock: 25
Ideal for winching and recovery use with a Hi-Lift Jack. Polyester material for a controlled pull and to reduce dangerous recoil. Designed for slower, more exact extraction requirements. Reflective loops make night recovery easier. With minimal light, the loops reflect and shine making it easier to see both connecting points during the night recovery process.
Online
$36.46for EA
Mfr PN: STRP-315
Stock: 25

36IN HI-LIFT JACK (CAST AND STEEL BLACK) 36IN HI-LIFT JACK (CAST AND STEEL BLACK)
Online
$110.72for EA
Mfr PN: HL-364
Stock: 25
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Black powder coat Overall length: 41" Max lift height: 27" Weight: 25lbs.
Online
$110.72for EA
Mfr PN: HL-364
Stock: 25

4 X RAC MOUNTING SYSTEM(BUMPER MOUNT) 4 X RAC MOUNTING SYSTEM(BUMPER MOUNT)
Online
$48.08for EA
Mfr PN: 4X400
Stock: 25
Although the Hi-Lift 4xRAC was designed with Jeep owners in mind, it may be installed on any flat surface 2-1/2 wide or more. Drilling required. Kit includes: 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts, 1 handle strap. It may be installed on any flat surface 2-1/2" wide or more Kit includes 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts and 1 handle strap
Online
$48.08for EA
Mfr PN: 4X400
Stock: 25

42 HI-LIFT JACK (CAST AND STEEL BLACK) 42 HI-LIFT JACK (CAST AND STEEL BLACK)
Online
$111.28for EA
Mfr PN: HL-424
Stock: 25
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Black powder coat Overall length: 44" Max lift height: 32" Weight: 27lbs.
Online
$111.28for EA
Mfr PN: HL-424
Stock: 25

42IN HI-LIFT JACK (ALL CAST RED) 42IN HI-LIFT JACK (ALL CAST RED)
Online
$122.50for EA
Mfr PN: HL-425
Stock: 25
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Red powder coat Overall length: 46" Max lift height: 34" Weight: 28lbs.
Online
$122.50for EA
Mfr PN: HL-425
Stock: 25

42IN HI-LIFT UTV JACK 42IN HI-LIFT UTV JACK
Online
$150.60for EA
Mfr PN: UTV-424
Stock: 19
Online
$150.60for EA
Mfr PN: UTV-424
Stock: 19

48 HI-LIFT JACK (ALL-CAST RED) 48 HI-LIFT JACK (ALL-CAST RED)
Online
$123.32for EA
Mfr PN: HL-485
Stock: 25
HI-LIFT ALL-CAST JACK The only all-cast jack manufactured - made - of high yield & tensile strength iron castings 7,000 lb. tested capacity Lifts, winches, clamps and more Top winch-connector clamp Powder-coated finish w/zinc plated hardware Includes safe use and load rating information 2-piece handle & socket - proven, durable design HL-485 48 IN. HI-LIFT JACK SIZE:48" COLOR:Red
Online
$123.32for EA
Mfr PN: HL-485
Stock: 25

55-95 CJ/YJ HOOD MOUNT 55-95 CJ/YJ HOOD MOUNT
Online
$103.33for EA
Mfr PN: HM-850
Stock: 11
Mount your Hi-Lift Jack within easy reach on any Jeep Wrangler and CJ. Mounts directly to existing hood hinge holes, no drilling required. 6061-T6 structural anodized aluminum for strength, durability, and a clean look.
Online
$103.33for EA
Mfr PN: HM-850
Stock: 11

60 HI-LIFT JACK (ALL-CAST RED) 60 HI-LIFT JACK (ALL-CAST RED)
Online
$125.90for EA
Mfr PN: HL-605
Stock: 25
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Red powder coat Overall length: 60" Max lift height: 50" Weight: 32lbs.
Online
$125.90for EA
Mfr PN: HL-605
Stock: 25

60 HI-LIFT JACK (CAST AND STEEL BLACK) 60 HI-LIFT JACK (CAST AND STEEL BLACK)
Online
$115.00for EA
Mfr PN: HL-604
Stock: 25
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Black powder coat Overall length: 60" Max lift height: 48" Weight: 31lbs.
Online
$115.00for EA
Mfr PN: HL-604
Stock: 25

60 HI-LIFT X-TREME JACK 60 HI-LIFT X-TREME JACK
Online
$165.12for EA
Mfr PN: XT-605
Stock: 22
Online
$165.12for EA
Mfr PN: XT-605
Stock: 22

Online
$171.22for EA
Mfr PN: BXR93B
Stock: 0

ADJUSTABLE TUBE MOUNT 2-3 ADJUSTABLE TUBE MOUNT 2-3
Online
$96.66for EA
Mfr PN: TM-750
Stock: 25
Designed for mounting a Hi-Lift jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1" up to 3" in diameter. The large set is designed for round tube from 2-3" in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2" in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages. Fits 2"-3" diameter bars Manufactured of 6061-T6 structural aluminum Stainless steel hardware Securely stores your Hi-Lift jack
Online
$96.66for EA
Mfr PN: TM-750
Stock: 25

BLACK HANDLE KEEPER INSULATOR BLACK HANDLE KEEPER INSULATOR
Online
$24.97for EA
Mfr PN: HK-B
Stock: 25
A must-have item for Hi-Lift Jack owners! The rugged polyurethane Hi-Lift Handle Keeper firmly holds the Hi-Lift Jack handle to the upright steel I-beam of the jack, keeping the handle in place when not in use and eliminating rattling during transportation and storage. Hi-Lift's unique design allows the Handle Keeper to be slipped on or off the jack without having to remove the Top Clamp/Clevis! Available in Black and Red. Black Rugged polyurethane Hi-Lift handle keeper firmly holds the Hi-Lift Jack handle
Online
$24.97for EA
Mfr PN: HK-B
Stock: 25

BUMPER LIFT ACCESSORY BUMPER LIFT ACCESSORY
Online
$38.30for EA
Mfr PN: BL-250
Stock: 11
3,000 lb capacity. Used with Hi-Lift Jack for bumpers that are slotted or have a curved surface. Manufactured of high-quality steel. Makes raising one wheel of average vehicle easy. Designed to be used with Hi-Lift Jacks only. When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2 (5 cm) above the ground an easy task. Never attempt to lift more than one wheel at a time.
Online
$38.30for EA
Mfr PN: BL-250
Stock: 11

CHAIN AND HOOK ASSEMBLY CHAIN AND HOOK ASSEMBLY
Online
$26.18for EA
Mfr PN: PP-350
Stock: 0
Online
$26.18for EA
Mfr PN: PP-350
Stock: 0

EQUIPMENT-AGRICULTURE JACK EQUIPMENT-AGRICULTURE JACK
Online
$127.68for EA
Mfr PN: EJ-550
Stock: 0
Online
$127.68for EA
Mfr PN: EJ-550
Stock: 0

HI-LIFT HOOD MOUNT LOCK HI-LIFT HOOD MOUNT LOCK
Online
$26.18for EA
Mfr PN: HM-LK
Stock: 25
The locking knob is a must have for any hood mount. Adjustable tube mount, 4XRAC, or LOC-RAC owner. The locking knob replaces an existing knob or wing nut provided on Hi-Lift Jack mounting accessories. Once tightened, the locking knob can be locked with the provided key. Once locked, the locking knob spins freely and cannot be removed, securing the Hi-Lift Jack in the mount. There are two size locking knobs available one model (HM-LK) fits Hood Mounts only. The other model (VERS-LK) fits Adjustable Tube Mounts, 4XRAC's, and Loc-Rac's. The VERS-LK can also be used to secure and lock the Unique Winch-Clamp-Spreader Attachment that comes only with the Hi-Lift X-TREME Jacks.
Online
$26.18for EA
Mfr PN: HM-LK
Stock: 25

HI-LIFT JACK ADJUSTABLE TUBE MOUNT 1-2 HI-LIFT JACK ADJUSTABLE TUBE MOUNT 1-2
Online
$79.13for EA
Mfr PN: TM-700
Stock: 25
Designed for mounting a Hi-Lift jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1" up to 3" in diameter. The large set is designed for round tube from 2-3" in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2" in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages. Fits 1"-2" diameter bars Manufactured of 6061-T6 structural aluminum Stainless steel hardware Securely stores your Hi-Lift jack
Online
$79.13for EA
Mfr PN: TM-700
Stock: 25

HI-LIFT OFF ROAD BASE 12X12 HI-LIFT OFF ROAD BASE 12X12
Online
$54.78for EA
Mfr PN: ORB
Stock: 25
Increase your support surface area and make the original power tool even more versatile. Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.
Online
$54.78for EA
Mfr PN: ORB
Stock: 25

HI-LIFT OFF ROAD KIT(BAG,GLOVES,STRAP,CHAIN) HI-LIFT OFF ROAD KIT(BAG,GLOVES,STRAP,CHAIN)
Online
$100.37for EA
Mfr PN: ORK
Stock: 25
The Hi-Lift Jack Off-Road Kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag. Use this kit to turn your Hi-Lift jack into an even more versatile tool.
Online
$100.37for EA
Mfr PN: ORK
Stock: 25

HI-LIFT PATRIOT EDITION 60IN ALL CAST JACK (BLUE) HI-LIFT PATRIOT EDITION 60IN ALL CAST JACK (BLUE)
Online
$143.82for EA
Mfr PN: PAT-605
Stock: 17
The Hi-Lift X-TREME is for the serious Hi-Lift user, offering the "top of the line" all-cast version (48" or 60" sizes) with a special top winch-clamp-spreader attachment that provides the ultimate in multi-use functionality. The X-TREME Top Clamp replaces the top clamp-clevis of the standard Hi-Lift models and provides the ability to winch, clamp, and spread up to 5, 000 lbs. X-TREME Top Clamp Features: - 7/8” shackle holes for easy, secure, non-binding attachment - 3/8” chain slot for easy, secure winching and quick slack adjustment. No hook is required. - Attachable at any point on the Jack’s steel standard bar for more versatility. - Cut-out wedge for gripping when spreading. Tested and certified to meet applicable requirements of ASME B30.1-2015.
Online
$143.82for EA
Mfr PN: PAT-605
Stock: 17

HI-LIFT RUNNING GEAR JACK COVER HI-LIFT RUNNING GEAR JACK COVER
Online
$43.50for EA
Mfr PN: RGJC
Stock: 25
Keep your Hi-Lift Jack Running Gear (or lifting assembly) protected from mud, dirt and grime. The Hi-Lift Running Gear Jack Cover is designed to greatly reduce the amount of dirt and mud that can accumulate in the working mechanism of the Hi-Lift Jack. Easy On, Easy Off Zipper Design Made with Marine Grade Vinyl (UV Protected, Mold and Mildew Resistant) Features carbon fiber embossing and PVC Hi-Lift logo patch Fits all Hi-Lift Jack Models The Running Gear Jack Cover (Part# RGJC) is a substantial improvement over, and replaces, the Neoprene Jack Cover (Part# NJC). Improved Features: High quality zipper Stronger material resists fading and tearing Improved fit
Online
$43.50for EA
Mfr PN: RGJC
Stock: 25

HIGH LIFT JACK CAST & STAMPED STEEL 48IN (OLD PART 484) HIGH LIFT JACK CAST & STAMPED STEEL 48IN (OLD PART 484)
Online
$112.08for EA
Mfr PN: HL-484
Stock: 25
For agriculture, automotive, offroad, hardware, industrial and DIY uses. Multi purpose, for lifting, winching and clamping. Low pick-up with lifting nose only 4-1/2'' from bottom of base plate. 4-1/2'' lifting nose for safe, positive contact with load. 28 square inch base plate for extra stability. Complete with adjustable top clamp clevis for use in clamping and winching. For speedy disengaging, lifting unit automatically drops away when load is removed. Safety bolt is designed to shear at 7,000 pounds. Approximate weight 30 pounds. Hght In=48 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$112.08for EA
Mfr PN: HL-484
Stock: 25

JACK PROTECTOR (VINYL BAG) JACK PROTECTOR (VINYL BAG)
Online
$42.33for EA
Mfr PN: JP-350
Stock: 5
Protects your Hi-Lift Jack from weather, mud, dirt and sand. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant. Fits 36", 42", 48" and 60" Hi-Lift Jacks. The Jack Protector WILL work with the 4XRAC and the LOC-RAC (user will have to place holes in protector). Soft Case Easily Stores. Drawstring Closure. (Note: All working parts of the 60" jack are protected. However, the foot piece and 5" of steel bar are exposed.) Protect your Hi-Lift Jack from weather, mud, dirt and sand Fits 36", 42", 48" and 60" Hi-Lift Jacks Jack protector willL work with the 4XRAC and the LOC-RAC
Online
$42.33for EA
Mfr PN: JP-350
Stock: 5

LIFT MATE JACK BASE LIFT MATE JACK BASE
Online
$51.33for EA
Mfr PN: LM-100
Stock: 15
In recent years, many vehicle changes have been made in body styles, bumper styles, larger tires and/or lift kits added, making it harder to find a place to jack up your vehicle. The Lift-Mate is designed to provide a lifting point from most wheels (instead of the bumper) when used with a Hi-Lift, the Lift-Mate makes raising one wheel of most average-sized vehicles a quick an easy lifting task.
Online
$51.33for EA
Mfr PN: LM-100
Stock: 15

LOC-RAC MOUNTING SYSTEM(BED-RAIL MOUNT) LOC-RAC MOUNTING SYSTEM(BED-RAIL MOUNT)
Online
$37.46for EA
Mfr PN: LR-200
Stock: 25
The Hi-Lift Jack Loc-Rac Truck Bed Jack Mounting System allows convenient, secure mounting of a Hi-Lift jack to the inside of a pick-up bed. The Loc-Rac can be mounted horizontally or vertically and used with or without a Jack Protector. Although designed to fit the bedrails of most pick-ups it can be used wherever a flat mounting surface is available. Lockable to deter theft.
Online
$37.46for EA
Mfr PN: LR-200
Stock: 25

RED HANDLE KEEPER INSULATOR RED HANDLE KEEPER INSULATOR
Online
$24.97for EA
Mfr PN: HK-R
Stock: 25
A must-have item for Hi-Lift Jack owners! The rugged polyurethane Hi-Lift Handle Keeper firmly holds the Hi-Lift Jack handle to the upright steel I-beam of the jack, keeping the handle in place when not in use and eliminating rattling during transportation and storage. Hi-Lift's unique design allows the Handle Keeper to be slipped on or off the jack without having to remove the Top Clamp/Clevis! Available in Black and Red. Red Rugged polyurethane Hi-Lift handle keeper firmly holds the Hi-Lift Jack handle
Online
$24.97for EA
Mfr PN: HK-R
Stock: 25

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.