CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Body Armor 4x4

05-11 TACOMA FRONT WINCH BUMPER 05-11 TACOMA FRONT WINCH BUMPER
Online
$928.99for EA
Mfr PN: TC-19335
Stock: 9
Exclusive 2 piece design keeps the weight down so this winch bumper wont nose dive the front of the truck. 3/16? sub frame/winch plate is attached directly to the front frame rails for the ultimate in strength. Designed for up to a 9500 pound winch, side control box design works best. There is extra room to mount a small air compressor. The otter steel shell mounts up with eight bolts at the shackle points so the entire installation is all bolt on! 11 gauge outer shell provides strength while keeping the weight to a minimum. 4? light pockets will take either after market lights or the OEM fog lights. Additional mounting points for two more lights on top of the bumper. High clearance corners for maximum off road performance. Low center section provides skid plate type protection for the front area of the vehicle.
Online
$928.99for EA
Mfr PN: TC-19335
Stock: 9

05-15 TACOMA CREW CAB SPORT RACK REQUIRES 5129 BASKET 05-15 TACOMA CREW CAB SPORT RACK REQUIRES 5129 BASKET
Online
$440.99for EA
Mfr PN: TC-6124
Stock: 2
Bolt Together Design: Requires 5129 Cab Basket: Attaches To Track System And Front Bed Mounts: No Drill Installation: Two-Stage Powdercoat Heavy Texture Finish In Black
Online
$440.99for EA
Mfr PN: TC-6124
Stock: 2

05-15 TACOMA PRO SERIES TIRE CARRIER FITS TC-2961 ONLY 05-15 TACOMA PRO SERIES TIRE CARRIER FITS TC-2961 ONLY
Online
$430.99for EA
Mfr PN: TC-5293
Stock: 11
Body Armor 4x4 TC-5293 - Black - Steel Swing Arm Tire Carrier For TC-2961 - 2005-2013 Toyota Tacoma features an design with double wheel bearings and an axle style shaft pivot that allows the Steel Swing Arm Tire Carrier to facilitate full access to the Truck bed. Engineered with rugged Steel Plate measuring at 5-Millimeters in thick this Steel Swing Arm Tire Carrier is attractively finished with a black dual process textured powder coat.
Online
$430.99for EA
Mfr PN: TC-5293
Stock: 11

05-15 TACOMA REAR BUMPER 05-15 TACOMA REAR BUMPER
Online
$608.99for EA
Mfr PN: TC-2961
Stock: 6
Contoured lines to fit the unique design of the factory bumper, retains the OEM trailer hitch. Comes complete with new frame brackets made of 3/16? plate. Bumper attaches to the brackets through eight grade 8 bolts that are reinforced by a 1/4? thick steel plate with recovery shackles. Pre-drilled license plate mounting holes. Add the TC-5293 swing arm tire carrier by replacing the shackles with the mount points that are included with the swing arm. Easy bolt on installation.
Online
$608.99for EA
Mfr PN: TC-2961
Stock: 6

05-15 TACOMA TAIL LIGHT GUARD 05-15 TACOMA TAIL LIGHT GUARD
Online
$122.99for EA
Mfr PN: TC-7136
Stock: 5
Body Armor 4x4 TC-7136 - Black - Steel Large Tail Light Guard for 2005-2006 Toyota Tundra (Pair) is expertly designed to provide added protection for expensive taillights. Featuring a no drill installation process. These Tail Light Guards are contoured to the specific dimensions of the 2005-2006 Toyota Tundra model taillights. An attractive dual process black powder coat finish is applied to the steel tube frames. The Lens crossbars are manufactured with solid wire bars.
Online
$122.99for EA
Mfr PN: TC-7136
Stock: 5

05-16 TACOMA CREW CAB DOUBLE STEP SIDE RAILS 05-16 TACOMA CREW CAB DOUBLE STEP SIDE RAILS
Online
$314.99for EA
Mfr PN: TC-4121
Stock: 1
The Body Armor 4x4 double step rocker guards will only fit Double Cab models. This includes a combination step and slider that mounts to the rocker panel with no drill installation. Poly step pads are available find the with Part # B/A5123. Covered with a dual process black powder coat finish. Mounting these on your truck will improves accessibility on lifted vehicles. Fits 2005 to 2013 Toyota Tacoma Crew Cab Black powder coat 5mm thick steel plate Double step areas
Online
$314.99for EA
Mfr PN: TC-4121
Stock: 1

07-13 TUNDRA FRONT WINCH BUMPER 07-13 TUNDRA FRONT WINCH BUMPER
Online
$1102.99for EA
Mfr PN: TN-19335
Stock: 0
Exclusive two piece design for easier installation, fully constructed of 3/16? steel plate for strength and durability. Designed for up to a 10,000 pound winch, side control box low profile design works best. High clearance corners for maximum off road performance. Center section provides skid plate type protection for the front area of the vehicle. Large 4.5? light pockets for auxiliary lights. High clearance design improves off road performance, two shackle plates for recovery points. Dual process textured black powder coat finish. Fits 2007 to 2013 Toyota Tundra:Front Winch mount Textured black powder coat finish 4.5 " light pockets 3/16 " thick steel plate construction
Online
$1102.99for EA
Mfr PN: TN-19335
Stock: 0

07-13 TUNDRA REAR BUMPER 07-13 TUNDRA REAR BUMPER
Online
$696.99for EA
Mfr PN: TN-2961
Stock: 0
Center step area with license plate mount, re-use OEM license plate lights, 3/16? thick steel plate construction, retain OEM hitch, mounts to OEM frame brackets. Bumper attaches to the frame brackets with eight grade 8 bolts through a 1/4? thick steel plate with recovery shackles. Replace the shackle plates with latch plate and bearing barrel plates when adding the TN-5293 swing arm tire carrier by replacing the shackles. Bolt on installation. Dual process textured black powder coat finish.
Online
$696.99for EA
Mfr PN: TN-2961
Stock: 0

07-14 FJ CRUISER ACCESSORIES TAIL LIGHT GUARD 07-14 FJ CRUISER ACCESSORIES TAIL LIGHT GUARD
Online
$122.99for EA
Mfr PN: FJ-7135
Stock: 17
Tail light guard flat design, finished in textured black powder coat finish, easy bolt on design. Tail Light Guard Black Wrap Around Style
Online
$122.99for EA
Mfr PN: FJ-7135
Stock: 17

07-14 FJ CRUISER FRONT WINCH BUMPER 07-14 FJ CRUISER FRONT WINCH BUMPER
Online
$928.99for EA
Mfr PN: FJ-19336
Stock: 0
Front winch bumper for Toyota FJ Cruiser. Exclusive two piece design includes 1/4 inch thick sub frame winch plate wrapped in a 3/16 inch thick steel shell, maximum strength, minimum weight. Winch capacity of up to 10,000 pounds, use low profile winches only, 4 inch light pockets for fog lights. High clearance corners are contoured to match up with factory fender flares while improved clearance for trail performance and clearance for large tires. Dual process textured black powder coat finish.
Online
$928.99for EA
Mfr PN: FJ-19336
Stock: 0

07-14 FJ CRUISER REAR BUMPER 07-14 FJ CRUISER REAR BUMPER
Online
$640.99for EA
Mfr PN: FJ-2961
Stock: 6
Online
$640.99for EA
Mfr PN: FJ-2961
Stock: 6

Online
$488.99for EA
Mfr PN: FJ-4122
Stock: 0

07-16 CHEVROLET 1500 ECO SERIES REAR BUMPER 07-16 CHEVROLET 1500 ECO SERIES REAR BUMPER
Online
$860.99for EA
Mfr PN: GM-2961
Stock: 12
The new ECO-Series rear bumper is designed to add more style to your truck. The ECO-Series bumper has many design features that make the investment in one of these bumpers an easy choice. Great Price as well. Some of the features include convenient step pockets at each corner.
Online
$860.99for EA
Mfr PN: GM-2961
Stock: 12

07-18 WRANGLER 4 DOOR ROCKCRAWLER SIDE STEPS 07-18 WRANGLER 4 DOOR ROCKCRAWLER SIDE STEPS
Online
$488.99for EA
Mfr PN: JK-4121
Stock: 0
Double tube maximum protection Rock Slider, 3/16, 2 x 3 rectangular .120 wall tubular carbon steel tube, additional 1-1/4 round tubing add-on .140 wall "Kick-Out" extended wheel well to wheel well armor protection for extreme user. No-drill chassis mount installation. 4 Mil Black Powder Coat finish with UV protector. Fits 2007 to 2014 JK Wrangler Unlimited and Rubicon Unlimited 4-door models Textured black powder coat finish with UV protector 2 in x 3in enclosed rectangle .120 wall tube with tapered and welded ends Additional 1-1/4" round tubing .120 wall
Online
$488.99for EA
Mfr PN: JK-4121
Stock: 0

07-18 WRANGLER 4 DOOR SIDE STEPS ROCKSTEPS 07-18 WRANGLER 4 DOOR SIDE STEPS ROCKSTEPS
Online
$463.99for EA
Mfr PN: JK-4123
Stock: 0
The new RockSteps for the JK are a very unique design as we have combined the slider and rub-rail protection of our RockCrawler side bars with the convenience of secure step areas. Manufactured from 3/16 thick steel plate the RockSteps provide excellent wheel well to wheel well protection. The RockSteps attach to the body of the Jeep through the pinch-weld and under the body making this a no-drill bolt on installation. The RockCrawler sliders are painted with our dual process textured black powder coat finish.
Online
$463.99for EA
Mfr PN: JK-4123
Stock: 0

07-18 WRANGLER FRONT BUMPER MID STUBBY 07-18 WRANGLER FRONT BUMPER MID STUBBY
Online
$488.99for EA
Mfr PN: JK-19532
Stock: 4
Manufactured from 3/16" steel plate, sculpted to enhance the styling of the JK platform, stubby design does not over power the front of the Jeep. Integrated winch plate with fairlead mounts, integrated shackle mounts for recovery points and grill guard are included. Includes reinforced wings for additional strength and a braced hoop. 3 Light mounting tabs on hoop for auxiliary lights. 2 4" light pockets under winch plate with laser cut steel screen. Retains factory vacuum pump location. Easy bolt installation, no drilling required. Black textured power coat finish. Shown with optional JK-5123 skid plate.
Online
$488.99for EA
Mfr PN: JK-19532
Stock: 4

07-18 WRANGLER FRONT BUMPER SKID PLATE 07-18 WRANGLER FRONT BUMPER SKID PLATE
Online
$163.99for EA
Mfr PN: JK-5123
Stock: 1
Body Armor Front Skid Plate replaces the plastic factory skid plate. It works with Body Armor front bumpers. This skid plate has an exclusive added kick down panel to protect the expensive factory sway bar disconnect. It includes laser cut Body Armor logo. This skid plate features black textured finish.
Online
$163.99for EA
Mfr PN: JK-5123
Stock: 1

07-18 WRANGLER GEN 3 TRAILDOORS FRONT, PAIR 07-18 WRANGLER GEN 3 TRAILDOORS FRONT, PAIR
Online
$409.99for EA
Mfr PN: JK-6139
Stock: 25
Body Armor Trail Doors are uniquely designed with "Speed Gusset" plates, the doors feature Body Armor's exclusive hidden dual position latch system for a positive and secure latch, easy to operate from either inside or outside of the vehicle. Doors come complete with the nylon web inserts for added protection from trail debris while allowing for increased trail visibility; doors are equipped with limiting straps preventing the doors from over swinging and hitting the hood. Pre drilled for installation of optional mirrors. Use mirror kit B/A5126. Powder coated in textured black finish.
Online
$409.99for EA
Mfr PN: JK-6139
Stock: 25

07-18 WRANGLER GEN 3 TRAILDOORS REAR, PAIR 07-18 WRANGLER GEN 3 TRAILDOORS REAR, PAIR
Online
$409.99for EA
Mfr PN: JK-6140
Stock: 25
Body Armor Trail Doors are uniquely designed with "Speed Gusset" plates, the doors feature Body Armor's exclusive hidden dual position latch system for a positive and secure latch, easy to operate from either inside or outside of the vehicle. Doors come complete with the nylon web inserts for added protection from trail debris while allowing for increased trail visibility; doors are equipped with limiting straps preventing the doors from over swinging and hitting the Jeep. Powder coated in textured black finish.
Online
$409.99for EA
Mfr PN: JK-6140
Stock: 25

07-18 WRANGLER TAIL LIGHT GUARD WRAP AROUND DESIGN 07-18 WRANGLER TAIL LIGHT GUARD WRAP AROUND DESIGN
Online
$122.99for EA
Mfr PN: JK-7135
Stock: 0
Body Armor Rear Tail Light Guard for factory tail lights of the vehicle. The wrap design helps to protect the tail light lens as well as the side of the light from trail obstacles such as branches and brush. It is easy to install with hand tools.
Online
$122.99for EA
Mfr PN: JK-7135
Stock: 0

09-14 F150 ECO SERIES FRONT BUMPER 09-14 F150 ECO SERIES FRONT BUMPER
Online
$860.99for EA
Mfr PN: FD-19337
Stock: 7
The new ECO-Series bumper adds strength and protection as well as style. Body Armor have taken extra steps to include multiple pockets in the center of the bumper to insure maximum airflow in the intercooler for the ECO-Boost rigs. This bumper also includes multiple light mounting points. In the pockets at the ends of the bumper there are mounting points for two cube LEDs in each pocket. In the center there is the ability to run a 20 single or dual row LED bar. Check out the Body Armor 4x4 3 series Cubes, 4 and six series dual row light bars and 5 series single row light bars. This bumper weighs in at 79 pounds so it will not bog down the suspension and gas mileage. Made from 3MM steel plate, and painted with our dual process textured powder coat. Bolt on installation, no drilling, cutting or welding required.
Online
$860.99for EA
Mfr PN: FD-19337
Stock: 7

09-14 F150 ECO SERIES REAR BUMPER 09-14 F150 ECO SERIES REAR BUMPER
Online
$860.99for EA
Mfr PN: FD-2963
Stock: 5
Body Armor 4x4 was founded over ten years ago with the vision to provide high quality durable products for the Off Road community. Our products are engineered to stand up to abuse and be functional while enhancing the looks of the vehicle. We are committed to providing innovative products to the unique off road enthusiast. We are driven by our passion for the off road community
Online
$860.99for EA
Mfr PN: FD-2963
Stock: 5

09-17 RAM 1500 ECO SERIES REAR BUMPER FITS DUAL REAR EXHAUST ONLY 09-17 RAM 1500 ECO SERIES REAR BUMPER FITS DUAL REAR EXHAUST ONLY
Online
$860.99for EA
Mfr PN: DG-2964
Stock: 6
Body Armor 4x4 was founded over ten years ago with the vision to provide high quality durable products for the off road community. Our products are engineered to stand up to abuse and functional while enhancing the looks of the vehicle that they are installed on. At Body Armor 4x4 we are committed to providing innovative products for the off road enthusiast.
Online
$860.99for EA
Mfr PN: DG-2964
Stock: 6

10-18 RAM 2500/3500 ECO SERIES REAR BUMPER 10-18 RAM 2500/3500 ECO SERIES REAR BUMPER
Online
$860.99for EA
Mfr PN: DG-2963
Stock: 2
The new ECO-Series rear is designed to add more style to the popular truck. The ECO-Series bumper has many design features that make the investment in one of these bumpers an easy choice. Great Price as well. Some of the features include convenient step pockets at each corner. Stylish pockets in each bumper wing feature a pentagon patterned mesh. These pockets also double as a light mounting points for dual cube LED lights. We have also included provisions for the backup sensors, hitch electrical hook up and spare tire crank access pocket. Also included are mounts for the OEM license plate lights. This bumper is designed to work with the factory hitch. Painted in our popular textured black powder coat. Easy bolt on installation. Check out our sister ECO-Series front bumper, they make a great pair.
Online
$860.99for EA
Mfr PN: DG-2963
Stock: 2

12-15 TACOMA FRONT WINCH BUMPER 12-15 TACOMA FRONT WINCH BUMPER
Online
$928.99for EA
Mfr PN: TC-19336
Stock: 1
Body Armor 4x4 Front Winch Bumper for 2012-2013 Toyota Tacoma - Black - Steel is designed with a 10,000 pounds winch capacity and dual recovery points. It features a 5 millimeter thick steel-plate bumper shell and a 6.5 millimeter thick integrated winch plate with a high clearance design. This winch bumper has dual light pockets and is designed for a low profile winch. It also features dual process textured black powder-coat finish and bolt-on installation. All mounting hardware is included. Heavy-duty construction ensures durability.
Online
$928.99for EA
Mfr PN: TC-19336
Stock: 1

13-17 RAM 1500 ECO SERIES FRONT BUMPER 13-17 RAM 1500 ECO SERIES FRONT BUMPER
Online
$860.99for EA
Mfr PN: DG-19339
Stock: 10
The new ECO-Series bumper adds strength and protection as well as style. Body Armor have taken extra steps to include multiple pockets in the center of the bumper to insure maximum airflow in the intercooler for the ECO-Boost rigs. This bumper also includes multiple light mounting points. In the pockets at the ends of the bumper there are mounting points for two cube LEDs in each pocket. In the center there is the ability to run a 20 single or dual row LED bar. Check out the Body Armor 4x4 3 series Cubes, 4 and six series dual row light bars and 5 series single row light bars. This bumper weighs in at 79 pounds so it will not bog down the suspension and gas mileage. Made from 3MM steel plate, and painted with our dual process textured powder coat. Bolt on installation, no drilling, cutting or welding required.
Online
$860.99for EA
Mfr PN: DG-19339
Stock: 10

13-18 RAM 2500/3500 ECO SERIES FRONT WINCH BUMPER 13-18 RAM 2500/3500 ECO SERIES FRONT WINCH BUMPER
Online
$1627.99for EA
Mfr PN: DG-19338
Stock: 2
Body Armor 4x4 was founded over ten years ago with the vision to provide high quality durable products for the Off Road community. Our products are engineered to stand up to abuse and be functional while enhancing the looks of the vehicle. We are committed to providing innovative products to the unique off road enthusiast. We are driven by our passion for the off road community
Online
$1627.99for EA
Mfr PN: DG-19338
Stock: 2

14-15 CHEVROLET 1500 ECO SERIES FRONT BUMPER 14-15 CHEVROLET 1500 ECO SERIES FRONT BUMPER
Online
$860.99for EA
Mfr PN: GM-19335
Stock: 16
Body Armor 4×4 has grown to be one of the most respected brands of Jeep, truck and SUV accessories available. What started as a Jeep-only bumper brand has evolved into an accessory brand that has expanded its products ranging from exterior armor, racks, interior storage, tents, trail accessories, suspension and so much more. With countless hours of design, tireless develop and robust engineering, Body Armor 4×4 is committed to bringing the best quality, most functional products at a price that is approachable to everyone.
Online
$860.99for EA
Mfr PN: GM-19335
Stock: 16

15-16 F150 ECO SERIES FRONT BUMPER 15-16 F150 ECO SERIES FRONT BUMPER
Online
$860.99for EA
Mfr PN: FD-19336
Stock: 0
The new ECO-Series bumper adds strength and protection as well as style. Body Armor have taken extra steps to include multiple pockets in the center of the bumper to insure maximum airflow in the intercooler for the ECO-Boost rigs. This bumper also includes multiple light mounting points. In the pockets at the ends of the bumper there are mounting points for two cube LEDs in each pocket. In the center there is the ability to run a 20 single or dual row LED bar. Check out the Body Armor 4x4 3 series Cubes, 4 and six series dual row light bars and 5 series single row light bars. This bumper weighs in at 79 pounds so it will not bog down the suspension and gas mileage. Made from 3MM steel plate, and painted with our dual process textured powder coat. Bolt on installation, no drilling, cutting or welding required.
Online
$860.99for EA
Mfr PN: FD-19336
Stock: 0

Online
$860.99for EA
Mfr PN: FD-2962
Stock: 0

16-18 CHEVROLET 1500 ECO SERIES FRONT BUMPER 16-18 CHEVROLET 1500 ECO SERIES FRONT BUMPER
Online
$860.99for EA
Mfr PN: GM-19336
Stock: 10
The new ECO-Series bumper adds strength and protection as well as style. Body Armor have taken extra steps to include multiple pockets in the center of the bumper to insure maximum airflow in the intercooler for the ECO-Boost rigs. This bumper also includes multiple light mounting points. In the pockets at the ends of the bumper there are mounting points for two cube LEDs in each pocket. In the center there is the ability to run a 20 single or dual row LED bar. Check out the Body Armor 4x4 3 series Cubes, 4 and six series dual row light bars and 5 series single row light bars. This bumper weighs in at 79 pounds so it will not bog down the suspension and gas mileage. Made from 3MM steel plate, and painted with our dual process textured powder coat. Bolt on installation, no drilling, cutting or welding required.
Online
$860.99for EA
Mfr PN: GM-19336
Stock: 10

16-20 TACOMA DESERT SERIES FRONT WINCH BUMPER 16-20 TACOMA DESERT SERIES FRONT WINCH BUMPER
Online
$984.99for EA
Mfr PN: TC-19337
Stock: 7
The new Desert Series front bumper is designed for the off road enthusiast that desires a race inspired look along with the strength to stand up to the rigors of flying through the desert. Main tube wraps around the corner to the fender flair. Designed with over-rider center hoop for protection of the grill, plus there are 4 welded light tabs for long distance HID lights. In the insert under the center hoop is a protective screen with cutout that are patterned after the OEM grill. Behind those screens you have the option of mount 6" dual LED lights. We have also included welded light tabs on the wings of the bumper for an additional 4 lights, PLUS there are provisions for a 30" Dual LED bar under the center hoop. You will never outrun your lights with this bumper! The bumper is painted in Mini-Tex deep black powder coat finish with 2 coats of a zinc based primer for maximum coorsion resistance. Precision MIG welded joints by American craftsmen, so yes these are made in the USA!
Online
$984.99for EA
Mfr PN: TC-19337
Stock: 7

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.