CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Victron Energy

Items 1- 32 of 133 total

Victron 2M Extension Cable f/IP65 Chargers Victron 2M Extension Cable f/IP65 Chargers
Online
$11.47for Each
Mfr PN: BPC900200014
Stock: 18

2M Extension Cable for IP65 Chargers

The 2 meter extension cable is an accessory of the Blue Smart IP65 Charger with DC connector.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$11.47for Each
Mfr PN: BPC900200014
Stock: 18

Victron 6-Way Mega Fuse Holder w/Busbar - 500A Victron 6-Way Mega Fuse Holder w/Busbar - 500A
Online
$28.54for Each
Retail $40.00
Mfr PN: CIP050060000
Stock: 13

6-Way Mega Fuse Holder with Busbar - 500A

Six-way fuse holder for Mega-fuse with busbar (500A)

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$28.54for Each
Retail $40.00
Mfr PN: CIP050060000
Stock: 13

Victron Argo Diode Battery Combiner - 80AMP - 2 Batteries Victron Argo Diode Battery Combiner - 80AMP - 2 Batteries
Online
$55.30for Each
Retail $62.00
Mfr PN: BCD000802000
Stock: 4

Argo Diode Battery Combiner - 80AMP - 2 Batteries

Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$55.30for Each
Retail $62.00
Mfr PN: BCD000802000
Stock: 4

Victron Argo Diode Battery Isolator - 160AMP - 2 Batteries Victron Argo Diode Battery Isolator - 160AMP - 2 Batteries
Online
$94.54for Each
Retail $106.00
Mfr PN: ARG160201020
Stock: 5

Argo Diode Battery Isolator - 160AMP - 2 Batteries

Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$94.54for Each
Retail $106.00
Mfr PN: ARG160201020
Stock: 5

Victron Argo FET Battery Isolator - 100AMP - 2 Batteries Victron Argo FET Battery Isolator - 100AMP - 2 Batteries
Online
$105.25for Each
Retail $118.00
Mfr PN: ARG100201020
Stock: 3

Argo FET Battery Isolator - 100AMP - 2 Batteries

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$105.25for Each
Retail $118.00
Mfr PN: ARG100201020
Stock: 3

Victron Argo FET Battery Isolator - 200AMP - 2 Batteries Victron Argo FET Battery Isolator - 200AMP - 2 Batteries
Online
$125.77for Each
Retail $141.00
Mfr PN: ARG200201020R
Stock: 5

Argo FET Battery Isolator - 200AMP - 2 Batteries

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$125.77for Each
Retail $141.00
Mfr PN: ARG200201020R
Stock: 5

Victron Argo FET Battery Isolator 100-3 3 Batteries - 100AMP Victron Argo FET Battery Isolator 100-3 3 Batteries - 100AMP
Online
$114.75for Each
Retail $135.00
Mfr PN: ARG100301020
Stock: 1

Argo FET Battery Isolator 100-3 3 Batteries - 100AMP

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

Warranty Info

Online
$114.75for Each
Retail $135.00
Mfr PN: ARG100301020
Stock: 1

Victron Argo FET Battery Isolator 200-3 3 Batteries - 200AMP Victron Argo FET Battery Isolator 200-3 3 Batteries - 200AMP
Online
$147.17for Each
Retail $165.00
Mfr PN: ARG200301020
Stock: 6

Argo FET Battery Isolator 200-3 3 Batteries - 200AMP

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

Warranty Info

Online
$147.17for Each
Retail $165.00
Mfr PN: ARG200301020
Stock: 6

Victron Autotransformer - Split Phase 120/240V - 100AMP Victron Autotransformer - Split Phase 120/240V - 100AMP
Online
$763.54for Each
Retail $784.00
Mfr PN: ITR000100101
Stock: 0

Autotransformer - Split Phase 120/240V - 100AMP

The Autotransformer: for step up, step down and split phase balancing An autotransformer can be used for step up, step down and split phase output balancing purposes. While the step up and step down functions are fairly straightforward, split phase output balancing may require some more attention. 

Consider for example a 30A 120/240V split phase supply. The supply could be the grid, a generator or two stacked inverters. Some of the loads connected are 240V, others are 120V. On each 120V leg the load should not exceed 30A. The problem is that as soon as 120V loads are connected, the two legs will show a different current. This is because the 120V loads on the two legs will never be balanced. A 120V 1200W hairdryer, for example, will draw 10A from one leg. A 120V washing machine could even draw in excess of 20A from one leg. Between the two legs the difference in current, or current unbalance, will therefore often be 20A or more. This means that the 30A supply will not be used up to its full potential. By the time one leg draws 30A, the other leg may be drawing no more than 10A, and increasing the 240V load, for example, will result in an overload of one leg while the other leg still has spare capacity. Theoretically, the total power that can be drawn from a 30A 120/240V supply is 30 x 240 = 7,2 kVA. In case of 20A unbalance, the practical maximum will be 30 x 120 + 10 x120 = 4,8kVA, or 67% of the theoretical maximum. The solution is an Autotransformer. By leaving the neutral of the split phase supply unused, and connecting an Autotransformer to create a new neutral, as shown in figure 1, any load unbalance is ‘absorbed’ by the Autotransformer. In case of a 30A supply, the load can be increased to 7,2kVA, and a 20A load unbalance will result in one leg supplying 40A, and the other leg 20A. The 20A difference will flow through the neutral and the windings of the Autotransformer. The current through both 120V wires of the split phase supply will be 30A. 

Temperature protected In case of overheating, the Autotransformer is disconnected from the supply. Reset is manual. Ground relay for use with Multi or Quattro Inverter/Chargers included When operating in inverter mode, the neutral output of the inverter/charger must be connected to ground to guarantee proper functioning of a GFCI. In case of a split phase supply the neutral must be grounded. For this purpose a grounding relay is built in the autotransformer’s enclosure. The relay is controlled by the 230/240V Multi or Quattro. (The internal grounding relay in the 230/240V Multi or Quattro must be disabled) 

An alternative to stacked inverters The alternative to stacking two 120V inverters to provide a 120/240V split phase supply is a 240V inverter with an additional Autotransformer.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$763.54for Each
Retail $784.00
Mfr PN: ITR000100101
Stock: 0

Victron Battery Alarm GX Victron Battery Alarm GX
Online
$75.81for Each
Retail $81.00
Mfr PN: BPA000100010R
Stock: 8

Battery Alarm GX

The Battery Alarm is a small and low cost alarm panel which monitors your battery bank. It features both audible and visual alarms, as well as a potential free contact with normally open and normally closed contacts. Alarm thresholds and hysteresis are programmable by DIP switches.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$75.81for Each
Retail $81.00
Mfr PN: BPA000100010R
Stock: 8

Victron Battery Monitor - BMV-702 - Black Victron Battery Monitor - BMV-702 - Black
Online
$187.32for Each
Retail $210.00
Mfr PN: BAM010702200R
Stock: 10

Battery Monitor - BMV-702 - Black

Features:

  • Battery ‘fuel gauge’, time-to-go indicator, and much more The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), battery temperature or midpoint voltage (see below). 
  • Bluetooth Smart Use the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, macbooks and other devices. 
  • Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting. 
  • Easy to program (with your smartphone!) A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed) 
  • Standard features - Battery voltage, current, power, ampere-hours consumed and state of charge - Remaining time at the current rate of discharge - Programmable visual and audible alarm - Programmable relay, to turn off non critical loads or to run a generator when needed - 500 Amp quick connect shunt and connection kit - Shunt selection capability up to 10.000 Amps - VE.Direct communication port - Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health - Wide input voltage range: 6,5 – 95V - High current measurement resolution: 10 mA (0,01A) - Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$187.32for Each
Retail $210.00
Mfr PN: BAM010702200R
Stock: 10

Victron Battery Monitor - BMV-702 - Grey Victron Battery Monitor - BMV-702 - Grey
Online
$187.32for Each
Retail $210.00
Mfr PN: BAM010702000R
Stock: 2

Battery Monitor - BMV-702 - Grey

Features:

  • Battery ‘fuel gauge’, time-to-go indicator, and much more The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), battery temperature or midpoint voltage (see below). 
  • Bluetooth Smart Use the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, macbooks and other devices. 
  • Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting. 
  • Easy to program (with your smartphone!) A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed) 
  • Standard features - Battery voltage, current, power, ampere-hours consumed and state of charge - Remaining time at the current rate of discharge - Programmable visual and audible alarm - Programmable relay, to turn off non critical loads or to run a generator when needed - 500 Amp quick connect shunt and connection kit - Shunt selection capability up to 10.000 Amps - VE.Direct communication port - Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health - Wide input voltage range: 6,5 – 95V - High current measurement resolution: 10 mA (0,01A) - Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$187.32for Each
Retail $210.00
Mfr PN: BAM010702000R
Stock: 2

Victron BatteryProtect BP-100 - 100AMP - 6-35 VDC Victron BatteryProtect BP-100 - 100AMP - 6-35 VDC
Online
$61.54for Each
Retail $69.00
Mfr PN: BPR000100400
Stock: 23

BatteryProtect BP-100 - 100AMP - 6-35 VDC

Features:

  • The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. 
  • 12/24V auto ranging The BatteryProtect automatically detects system voltage 
  • Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen. 
  • A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual. 
  • Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. 
  • Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
  • Ignition proof No relays but MOSFET switches, and therefore no sparks.
  • Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$61.54for Each
Retail $69.00
Mfr PN: BPR000100400
Stock: 23

Victron BatteryProtect BP-220 - 220AMP - 6-35 VDC Victron BatteryProtect BP-220 - 220AMP - 6-35 VDC
Online
$101.69for Each
Retail $137.00
Mfr PN: BPR000220400
Stock: 19

BatteryProtect BP-220 - 220AMP - 6-35 VDC

Features:

  • The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. 
  • 12/24V auto ranging The BatteryProtect automatically detects system voltage 
  • Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen. 
  • A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual. 
  • Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. 
  • Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
  • Ignition proof No relays but MOSFET switches, and therefore no sparks.
  • Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$101.69for Each
Retail $137.00
Mfr PN: BPR000220400
Stock: 19

Victron BatteryProtect BP-65 - 65AMP - 6-35 VDC Victron BatteryProtect BP-65 - 65AMP - 6-35 VDC
Online
$41.92for Each
Retail $47.00
Mfr PN: BPR000065400
Stock: 18

BatteryProtect BP-65 - 65AMP - 6-35 VDC

Features:

  • The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. 
  • 12/24V auto ranging The BatteryProtect automatically detects system voltage 
  • Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen. 
  • A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual. 
  • Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. 
  • Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
  • Ignition proof No relays but MOSFET switches, and therefore no sparks.
  • Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$41.92for Each
Retail $47.00
Mfr PN: BPR000065400
Stock: 18

Victron BlueSmart IP65 Charger - 12 VDC - 15AMP Victron BlueSmart IP65 Charger - 12 VDC - 15AMP
Online
$167.69for Each
Retail $173.00
Mfr PN: BPC121531104R
Stock: 33

BlueSmart IP65 Charger - 12 VDC - 15AMP

Features:

  • Charger - The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
  • The battery is charged, smartly... to perfect condition - The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
  • Recovery of deeply-discharged 'dead' batteries - Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
  • Connect the battery with ease - The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
  • Check the status of your battery remotely - The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$167.69for Each
Retail $173.00
Mfr PN: BPC121531104R
Stock: 33

Victron BlueSmart IP65 Charger - 24 VDC - 8AMP Victron BlueSmart IP65 Charger - 24 VDC - 8AMP
Online
$167.69for Each
Retail $173.00
Mfr PN: BPC240831104R
Stock: 34

BlueSmart IP65 Charger - 24 VDC - 8AMP

Features:

  • Charger - The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
  • The battery is charged, smartly... to perfect condition - The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
  • Recovery of deeply-discharged 'dead' batteries - Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
  • Connect the battery with ease - The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
  • Check the status of your battery remotely - The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$167.69for Each
Retail $173.00
Mfr PN: BPC240831104R
Stock: 34

Victron BlueSmart IP65 Charger 12 VDC - 10AMP Victron BlueSmart IP65 Charger 12 VDC - 10AMP
Online
$145.40for Each
Retail $150.00
Mfr PN: BPC121031104R
Stock: 31

BlueSmart IP65 Charger 12 VDC - 10AMP

Features:

  • Charger - The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
  • The battery is charged, smartly... to perfect condition - The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
  • Recovery of deeply-discharged 'dead' batteries - Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
  • Connect the battery with ease - The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
  • Check the status of your battery remotely - The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$145.40for Each
Retail $150.00
Mfr PN: BPC121031104R
Stock: 31

Victron BlueSmart IP65 Charger 12 VDC - 7AMP Victron BlueSmart IP65 Charger 12 VDC - 7AMP
Online
$122.20for Each
Retail $127.00
Mfr PN: BPC120731104R
Stock: 33

BlueSmart IP65 Charger 12 VDC - 7AMP 

Features:

  • Charger - The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
  • The battery is charged, smartly... to perfect condition - The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
  • Recovery of deeply-discharged 'dead' batteries - Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
  • Connect the battery with ease - The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
  • Check the status of your battery remotely - The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$122.20for Each
Retail $127.00
Mfr PN: BPC120731104R
Stock: 33

Victron BlueSmart IP67 Charger - 12 VDC - 17AMP Victron BlueSmart IP67 Charger - 12 VDC - 17AMP
Online
$151.64for Each
Retail $157.00
Mfr PN: BPC121715106
Stock: 11

BlueSmart IP67 Charger - 12 VDC - 17AMP

Features:

  • Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. 
  • Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. 
  • The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. 
  • Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimize the charging process relative to the way the battery is being used. 
  • Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. 
  • Also charges Li-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm. 
  • Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. 
  • Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$151.64for Each
Retail $157.00
Mfr PN: BPC121715106
Stock: 11

Victron BlueSmart IP67 Charger - 12 VDC - 7AMP Victron BlueSmart IP67 Charger - 12 VDC - 7AMP
Online
$116.85for Each
Retail $121.00
Mfr PN: BPC120715106
Stock: 12

BlueSmart IP67 Charger - 12 VDC - 7AMP

Features:

  • Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. 
  • Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. 
  • The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. 
  • Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimize the charging process relative to the way the battery is being used. 
  • Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. 
  • Also charges Li-ion batteries and LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm. 
  • Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. 
  • Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$116.85for Each
Retail $121.00
Mfr PN: BPC120715106
Stock: 12

Victron BlueSmart IP67 Charger 12VDC - 13AMP Victron BlueSmart IP67 Charger 12VDC - 13AMP
Online
$138.25for Each
Retail $143.00
Mfr PN: BPC121315106
Stock: 13

BlueSmart IP67 Charger 12VDC - 13AMP

Features:

  • Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. 
  • Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. 
  • The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. 
  • Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. 
  • Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. 
  • Also charges Li-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm. 
  • Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. 
  • Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$138.25for Each
Retail $143.00
Mfr PN: BPC121315106
Stock: 13

Victron BlueSolar MPPT Charge Controller - 100V - 15AMP Victron BlueSolar MPPT Charge Controller - 100V - 15AMP
Online
$113.28for Each
Retail $127.00
Mfr PN: SCC010015200R
Stock: 18

BlueSolar MPPT Charge Controller - 100V - 15AMP

Features:

  • Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. 
  • Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. 
  • Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. 
  • Programmable battery charge algorithm See the software section on our website for details 
  • Day/night timing and light dimming option See the software section on our website for details 
  • Programming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$113.28for Each
Retail $127.00
Mfr PN: SCC010015200R
Stock: 18

Victron BlueSolar MPPT Charge Controller - 75V - 10AMP Victron BlueSolar MPPT Charge Controller - 75V - 10AMP
Online
$83.85for Each
Retail $94.00
Mfr PN: SCC010010050R
Stock: 11

BlueSolar MPPT Charge Controller - 75V - 10AMP

Features:

  • Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. 
  • Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. 
  • Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. 
  • Programmable battery charge algorithm See the software section on our website for details 
  • Day/night timing and light dimming option See the software section on our website for details 
  • Programming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$83.85for Each
Retail $94.00
Mfr PN: SCC010010050R
Stock: 11

Victron BlueSolar MPPT Charge Controller - 75V - 15AMP Victron BlueSolar MPPT Charge Controller - 75V - 15AMP
Online
$92.77for Each
Retail $104.00
Mfr PN: SCC010015050R
Stock: 7

BlueSolar MPPT Charge Controller - 75V - 15AMP

Features:

  • Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. 
  • Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. 
  • Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. 
  • Programmable battery charge algorithm See the software section on our website for details 
  • Day/night timing and light dimming option See the software section on our website for details 
  • Programming, real-time data and history display options - Color Control GX or other GX devices: see the Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$92.77for Each
Retail $104.00
Mfr PN: SCC010015050R
Stock: 7

Victron BlueSolar PWM-Light Charge Controller - 12/24V - 10AMP Victron BlueSolar PWM-Light Charge Controller - 12/24V - 10AMP
Online
$31.21for Each
Mfr PN: SCC010010000
Stock: 6

BlueSolar PWM-Light Charge Controller - 12/24V - 10AMP

Features:

  • Load output with low battery voltage disconnect function.
  • Lighting control function, one timer only. 
  • Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. 
  • Three stage battery charging (bulk, absorption, float), not programmable.
  • Load output protected against over load and short circuit.
  • Protected against reverse polarity connection of the solar array and/or battery.
  • Day/night timing options: see manual for details

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$31.21for Each
Mfr PN: SCC010010000
Stock: 6

Victron BlueSolar PWM-Light Charge Controller - 12/24V - 20AMP Victron BlueSolar PWM-Light Charge Controller - 12/24V - 20AMP
Online
$41.02for Each
Retail $46.00
Mfr PN: SCC010020020
Stock: 4

BlueSolar PWM-Light Charge Controller - 12/24V - 20AMP

Features:

  • Load output with low battery voltage disconnect function.
  • Lighting control function, one timer only. 
  • Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. 
  • Three stage battery charging (bulk, absorption, float), not programmable.
  • Load output protected against over load and short circuit.
  • Protected against reverse polarity connection of the solar array and/or battery.
  • Day/night timing options: see manual for details

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$41.02for Each
Retail $46.00
Mfr PN: SCC010020020
Stock: 4

Victron BlueSolar PWM-Light Charge Controller - 12/24V - 30AMP Victron BlueSolar PWM-Light Charge Controller - 12/24V - 30AMP
Online
$57.09for Each
Retail $64.00
Mfr PN: SCC010030020
Stock: 4

BlueSolar PWM-Light Charge Controller - 12/24V - 30AMP

Features:

  • Load output with low battery voltage disconnect function.
  • Lighting control function, one timer only. 
  • Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. 
  • Three stage battery charging (bulk, absorption, float), not programmable.
  • Load output protected against over load and short circuit.
  • Protected against reverse polarity connection of the solar array and/or battery.
  • Day/night timing options: see manual for details

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$57.09for Each
Retail $64.00
Mfr PN: SCC010030020
Stock: 4

Victron BlueSolar PWM-Light Charge Controller - 12/24V - 5AMP Victron BlueSolar PWM-Light Charge Controller - 12/24V - 5AMP
Online
$25.86for Each
Retail $29.00
Mfr PN: SCC010005000
Stock: 5

BlueSolar PWM-Light Charge Controller - 12/24V - 5AMP

Features:

  • Load output with low battery voltage disconnect function.
  • Lighting control function, one timer only. 
  • Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. 
  • Three stage battery charging (bulk, absorption, float), not programmable.
  • Load output protected against over load and short circuit.
  • Protected against reverse polarity connection of the solar array and/or battery.
  • Day/night timing options: see manual for details

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$25.86for Each
Retail $29.00
Mfr PN: SCC010005000
Stock: 5

Victron BMV-700 Battery Monitor Victron BMV-700 Battery Monitor
Online
$150.74for Each
Retail $169.00
Mfr PN: BAM010700000R
Stock: 8

BMV-700 Battery Monitor

The BMV-700 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

Features:

  • Battery voltage, current, power, ampere-hours consumed and state of charge 
  • Remaining time at the current rate of discharge 
  • Programmable visual and audible alarm 
  • Programmable relay, to turn off non critical loads or to run a generator when needed 
  • 500 Amp quick connect shunt and connection kit 
  • Shunt selection capability up to 10.000 Amps 
  • VE.Direct communication port 
  • Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health 
  • Wide input voltage range: 6,5 – 95V 
  • High current measurement resolution: 10 mA (0,01A) 
  • Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V

VictronConnect

VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$150.74for Each
Retail $169.00
Mfr PN: BAM010700000R
Stock: 8

Victron BMV-712 Black Smart Battery Monitor Victron BMV-712 Black Smart Battery Monitor
Online
$216.76for Each
Retail $243.00
Mfr PN: BAM030712200
Stock: 12

BMV-712 Black Smart Battery Monitor

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. 

Features:

  • Battery voltage, current, power, ampere-hours consumed and state of charge
  • Remaining time at the current rate of discharge 
  • Programmable visual and audible alarm 
  • Programmable relay, to turn off non critical loads or to run a generator when needed 
  • 500 Amp quick connect shunt and connection kit 
  • Shunt selection capability up to 10.000 Amps 
  • VE.Direct communication port 
  • Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health 
  • Wide input voltage range: 6,5 – 70V 
  • High current measurement resolution: 10 mA (0,01A) 
  • Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings

VictronConnect

VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$216.76for Each
Retail $243.00
Mfr PN: BAM030712200
Stock: 12

Victron Busbar to Connect 6 Modular Holders Victron Busbar to Connect 6 Modular Holders
Online
$46.38for Each
Retail $52.00
Mfr PN: CIP100400070
Stock: 8

Busbar to Connect 6 Modular Holders

Features:

  • Six position high current bus bar (1500 A)
  • With two M10 input connections.
  • Input current up to 2000 A.
  • Recommended to parallel multiple high power Multi or Quattro inverter/chargers

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Online
$46.38for Each
Retail $52.00
Mfr PN: CIP100400070
Stock: 8

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.