CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 
 
  1. Home:
  2. showbrand
 

Shop by Brand: Airmar

Airmar 10-Conductor In-Line Cable Splice - IP67 Airmar 10-Conductor In-Line Cable Splice - IP67
Online
$30.40for Each
Mfr PN: D00342H
Stock: 6

10-Conductor In-Line Cable Splice - IP67

Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.

Gemeco has introduced a new line of in-line splices that can be used to connect CHIRP transducers to the correct connector for a given application. These splices are available in two models, one for wires with up to 6 conductors and one for wires with up to 10 conductors. Both models have waterproof gland fittings rated to IP67. A 1.3mm hex-head wrench is included.

Online
$30.40for Each
Mfr PN: D00342H
Stock: 6

Airmar 117WR-1 Crows Foot Transducer Wrench Airmar 117WR-1 Crows Foot Transducer Wrench
Online
$35.66for Each
Mfr PN: 117WR-1
Stock: 3
117WR-1 Crows Foot Transducer Wrench

Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.

  • Wrenches are constructed of 3/16" thick mild steel.
  • They can easily be bent or modified to accommodate challenging installation locations.


For use with:
  • B117
  • B150
  • B744V
  • B744VL
  • B765C
  • SS555
Online
$35.66for Each
Mfr PN: 117WR-1
Stock: 3

Airmar 117WR-2 Transducer Hull Nut Wrench Airmar 117WR-2 Transducer Hull Nut Wrench
Online
$47.20for Each
Mfr PN: 117WR-2
Stock: 1
117WR-2 Transducer Hull Nut Wrench

A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.

You can use wrench 117WR-4 to brace the housing when using this wrench.

For use with:
  • B117
  • B150
  • B744V
  • B744VL
  • B765C
  • SS555
Online
$47.20for Each
Mfr PN: 117WR-2
Stock: 1

Airmar 117WR-4 Transducer Housing Wrench Airmar 117WR-4 Transducer Housing Wrench
Online
$35.66for Each
Mfr PN: 117WR-4
Stock: 1
117WR-4 Transducer Housing Wrench

A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).

Use wrench 117WR-2 or 117WR-3 for the hull nut.

*Note that this wrench will not fit on the CA500 camera housing.
Online
$35.66for Each
Mfr PN: 117WR-4
Stock: 1

Airmar 164WR-1 Crows Foot Transducer Wrench Airmar 164WR-1 Crows Foot Transducer Wrench
Online
$46.41for Each
Retail $50.00
Mfr PN: 164WR-1
Stock: 0
164WR-1 Crows Foot Transducer Wrench

Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.

  • Wrenches are constructed of 3/16" thick mild steel.
  • They can easily be bent or modified to accommodate challenging installation locations.


For use with:
  • B164
  • SS164
  • B175C
  • SS164
Online
$46.41for Each
Retail $50.00
Mfr PN: 164WR-1
Stock: 0

Airmar 164WR-2 Transducer Hull Nut Wrench Airmar 164WR-2 Transducer Hull Nut Wrench
Online
$59.70for Each
Retail $68.00
Mfr PN: 164WR-2
Stock: 0
164WR-2 Transducer Hull Nut Wrench

A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.

You can use wrench 164WR-4 to brace the housing when using this wrench.

For use with:
  • B164
  • SS164
  • SS264
Online
$59.70for Each
Retail $68.00
Mfr PN: 164WR-2
Stock: 0

Airmar 164WR-3 Double Handle Transducer Wrench Airmar 164WR-3 Double Handle Transducer Wrench
Online
$74.20for Each
Retail $84.00
Mfr PN: 164WR-3
Stock: 3
164WR-3 Double Handle Transducer Wrench

Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.

  • Wrenches are constructed of 3/16" thick mild steel.
  • They can easily be bent or modified to accommodate challenging installation locations.


For use with:
  • B164
  • SS164
  • B175C
  • SS264
Online
$74.20for Each
Retail $84.00
Mfr PN: 164WR-3
Stock: 3

Airmar 175WR-4 Transducer Housing Wrench Airmar 175WR-4 Transducer Housing Wrench
Online
$39.78for Each
Mfr PN: 175WR-4
Stock: 2
175WR-4 Transducer Housing Wrench

A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut.
Use wrench 164WR-2 or 164WR-3 for the hull nut.

For use with:
  • B164
  • B175
  • SS164
  • SS264


IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16".
Online
$39.78for Each
Mfr PN: 175WR-4
Stock: 2

Airmar 60WR-1 Crows Foot Transducer Wrench Airmar 60WR-1 Crows Foot Transducer Wrench
Online
$35.66for Each
Mfr PN: 60WR-1
Stock: 1
60WR-1 Crows Foot Transducer Wrench

Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.

  • Wrenches are constructed of 3/16" thick mild steel.
  • They can easily be bent or modified to accommodate challenging installation locations.


For use with:
  • SS60
  • B60

Online
$35.66for Each
Mfr PN: 60WR-1
Stock: 1

Airmar 60WR-2 Transducer Hull Nut Wrench Airmar 60WR-2 Transducer Hull Nut Wrench
Online
$48.78for Each
Retail $54.00
Mfr PN: 60WR-2
Stock: 1
60WR-2 Transducer Hull Nut Wrench

A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.

You can use wrench 60WR-4 to brace the housing when using this wrench.

For use with:
  • B60
  • SS60
Online
$48.78for Each
Retail $54.00
Mfr PN: 60WR-2
Stock: 1

Airmar 60WR-3 Double Handle Transducer Wrench Airmar 60WR-3 Double Handle Transducer Wrench
Online
$59.70for Each
Retail $68.00
Mfr PN: 60WR-3
Stock: 0
60WR-3 Double Handle Transducer Wrench

Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.

  • Wrenches are constructed of 3/16" thick mild steel.
  • They can easily be bent or modified to accommodate challenging installation locations.


For use with:
  • B60
  • SS60
Online
$59.70for Each
Retail $68.00
Mfr PN: 60WR-3
Stock: 0

Airmar 60WR-4 Transducer Housing Wrench Airmar 60WR-4 Transducer Housing Wrench
Online
$37.26for Each
Mfr PN: 60WR-4
Stock: 0
60WR-4 Transducer Housing Wrench

A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.

Use wrench 60WR-2 or 60WR-3 for the hull nut.

For use with:
  • B60
  • SS60
Online
$37.26for Each
Mfr PN: 60WR-4
Stock: 0

Airmar 75WR-1 Crows Foot Transducer Wrench Airmar 75WR-1 Crows Foot Transducer Wrench
Online
$37.26for Each
Mfr PN: 75WR-1
Stock: 2
75WR-1 Crows Foot Transducer Wrench

Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.

  • Wrenches are constructed of 3/16" thick mild steel.
  • They can easily be bent or modified to accommodate challenging installation locations.


For use with:
  • B75
  • SS75
Online
$37.26for Each
Mfr PN: 75WR-1
Stock: 2

Airmar 75WR-2 Transducer Hull Nut Wrench Airmar 75WR-2 Transducer Hull Nut Wrench
Online
$48.78for Each
Retail $54.00
Mfr PN: 75WR-2
Stock: 0
75WR-2 Transducer Hull Nut Wrench

A single-handed wrench to tighten the hull nut on bronze and stainless steel housings.

You can use wrench 75WR-4 to brace the housing when using this wrench.

For use with:
  • B75
  • SS75
Online
$48.78for Each
Retail $54.00
Mfr PN: 75WR-2
Stock: 0

Airmar 75WR-3 Double Handle Transducer Wrench Airmar 75WR-3 Double Handle Transducer Wrench
Online
$60.06for Each
Retail $68.00
Mfr PN: 75WR-3
Stock: 0
75WR-3 Double Handle Transducer Wrench

Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.

  • Wrenches are constructed of 3/16" thick mild steel.
  • They can easily be bent or modified to accommodate challenging installation locations.


For use with:
  • B75
  • SS75
Online
$60.06for Each
Retail $68.00
Mfr PN: 75WR-3
Stock: 0

Airmar 75WR-4 Transducer Housing Wrench Airmar 75WR-4 Transducer Housing Wrench
Online
$37.68for Each
Retail $48.00
Mfr PN: 75WR-4
Stock: 0
75WR-4 Transducer Housing Wrench

A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.
Use wrench 75WR-2 or 75WR-3 for the hull nut.

For use with:
  • B75
  • SS75
Online
$37.68for Each
Retail $48.00
Mfr PN: 75WR-4
Stock: 0

Airmar B175H Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable Airmar B175H Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable
Online
$1050.76for Each
Mfr PN: B175C-20-H-MM
Stock: 0

B175H Bronze Thru Hull 20° Tilt - 1kW

Requires Mix and Match Cable

Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

  • High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth
  • 20° tilted version, 1KW
  • 80 kHz of total bandwidth from one transducer
  • Depth & fast-response water-temperature sensor
  • Bronze transducer housing
  • Boat Size: Up to 11 m (36’)
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$1050.76for Each
Mfr PN: B175C-20-H-MM
Stock: 0

Airmar B175HW Bronze Thru Hull 0° Tilt - 1kW Airmar B175HW Bronze Thru Hull 0° Tilt - 1kW
Online
$1295.45for Each
Mfr PN: B175C-0-HW-MM
Stock: 0

B175HW Bronze Thru Hull 0° Tilt - 1kW

Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers

A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.

Features:

  • Depth & fast-response water-temperature sensor
  • 0 degree tilted version, 1KW
  • High—CHIRPS from 150 kHz to 250 kHz
  • 25° constant beamwidth
  • 100 kHz of total bandwidth from one transducer
  • Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
  • Boat Size: 8 m (25’) and above
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$1295.45for Each
Mfr PN: B175C-0-HW-MM
Stock: 0

Airmar B175HW Bronze Thru Hull 12° Tilt - 1kW - Requires Mix and Match Cable Airmar B175HW Bronze Thru Hull 12° Tilt - 1kW - Requires Mix and Match Cable
Online
$1295.45for Each
Mfr PN: B175C-12-HW-MM
Stock: 2

B175HW Bronze Thru Hull 12° Tilt - 1kW

Requires Mix and Match Cable

Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers

A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.

Features:

  • Depth & fast-response water-temperature sensor
  • 12 degree tilted version, 1KW
  • High—CHIRPS from 150 kHz to 250 kHz
  • 25° constant beamwidth
  • 100 kHz of total bandwidth from one transducer
  • Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
  • Boat Size: 8 m (25’) and above
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$1295.45for Each
Mfr PN: B175C-12-HW-MM
Stock: 2

Airmar B175HW Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable Airmar B175HW Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable
Online
$1315.70for Each
Mfr PN: B175C-20-HW-MM
Stock: 0

B175HW Bronze Thru Hull 20° Tilt - 1kW

Requires Mix and Match Cable

Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers

A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.

Features:

  • Depth & fast-response water-temperature sensor
  • 20 degree tilted version, 1KW
  • High—CHIRPS from 150 kHz to 250 kHz
  • 25° constant beamwidth
  • 100 kHz of total bandwidth from one transducer
  • Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
  • Boat Size: 8 m (25’) and above
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$1315.70for Each
Mfr PN: B175C-20-HW-MM
Stock: 0

Airmar B175M Bronze Thru Hull 0° Tilt - 1kW - Requires Mix and Match Cable Airmar B175M Bronze Thru Hull 0° Tilt - 1kW - Requires Mix and Match Cable
Online
$1144.32for Each
Mfr PN: B175C-0-M-MM
Stock: 0

B175M Bronze Thru Hull 0° Tilt - 1kW

Requires Mix and Match Cable

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

  • Medium—CHIRPS from 85 kHz to 135 kHz, 24° to 16° beamwidth
  • 0° tilted version, 1KW
  • 50 kHz of total bandwidth from one transducer
  • Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
  • Depth & fast-response water-temperature sensor
  • Bronze transducer housing
  • Boat Size: Up to 11 m (36’)
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$1144.32for Each
Mfr PN: B175C-0-M-MM
Stock: 0

Airmar B175M Bronze Thru Hull 12° Tilt - 1kW - Requires Mix and Match Cable Airmar B175M Bronze Thru Hull 12° Tilt - 1kW - Requires Mix and Match Cable
Online
$1238.89for Each
Mfr PN: B175C-12-M-MM
Stock: 2

B175M Bronze Thru Hull 12° Tilt - 1kW

Requires Mix and Match Cable

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

  • Medium—CHIRPS from 85 kHz to 135 kHz, 24° to 16° beamwidth
  • 12° tilted version
  • 50 kHz of total bandwidth from one transducer
  • Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
  • Depth & fast-response water-temperature sensor
  • Bronze transducer housing
  • Boat Size: Up to 11 m (36’)
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$1238.89for Each
Mfr PN: B175C-12-M-MM
Stock: 2

Airmar B175M Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable Airmar B175M Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable
Online
$1144.32for Each
Mfr PN: B175C-20-M-MM
Stock: 0

B175M Bronze Thru Hull 20° Tilt - 1kW

Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Requires Mix and Match Cable

Features:

  • Medium—CHIRPS from 85 kHz to 135 kHz, 24° to 16° beamwidth
  • 20° tilted version, 1KW
  • 50 kHz of total bandwidth from one transducer
  • Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
  • Depth & fast-response water-temperature sensor
  • Bronze transducer housing
  • Boat Size: Up to 11 m (36’)
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$1144.32for Each
Mfr PN: B175C-20-M-MM
Stock: 0

Airmar B265LH Bronze Chirp Thru Hull 1kW w/Fairing Block - Requires Mix and Match Cable Airmar B265LH Bronze Chirp Thru Hull 1kW w/Fairing Block - Requires Mix and Match Cable
Online
$1437.15for Each
Mfr PN: B265C-LH-MM
Stock: 2

B265LH Bronze Chirp Thru Hull 1kW with Fairing Block

Requires Mix and Match Cable

Imagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then catching them! With the B265 transducer connected to a tunable fish finder, you too can have a log book like a commercial fisherman. This powerhouse transducer delivers extreme target detail, bottom discrimination, and bait and game fish separation at all depths. The B265LH is packed with a seven-element, low-frequency array that operates at anywhere between 42 kHz and 65 kHz. It has a wide, 25° beam that will adjust by several degrees as the frequency is tuned up or down the band. The single, high-frequency ceramic operates at any frequency between 130 kHz and 210 kHz and has a narrow, 6° beam that is adjustable by several degrees. The included High-Performance Fairing will give you broadband performance at speeds over 30 knots (34 MPH). We will leave it up to you to discover the rest of the secrets that can be unlocked with tunable, Chirp Broadband Transducer Technology.

Features:

  • Depth & fast-response water-temperature sensor
  • Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° port-starboard beamwidth
  • High—CHIRPS from 130 kHz to 210 kHz 10° to 6° beamwidth
  • 103 kHz of total bandwidth from one transducer
  • Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
  • Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
  • Bronze transducer housing with High-Performance Fairing
  • Boat Size: 8 m (25’) and above
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$1437.15for Each
Mfr PN: B265C-LH-MM
Stock: 2

Airmar B275C-LHW Bronze Thru-Hull - Low & High Wide Frequency - Requires Mix & Match Cable Airmar B275C-LHW Bronze Thru-Hull - Low & High Wide Frequency - Requires Mix & Match Cable
Online
$2070.02for Each
Retail $2235.00
Mfr PN: B275C-LHW-MM
Stock: 4

B275C-LHW Bronze Thru-Hull - Low & High Wide Frequency

Requires Mix & Match Cable

Get more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CHIRP transducers.

A unique property of the high frequency transducers is that the beambwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display. We've got you covered!

Features:

  • Depth & Temperature
  • 42-65 kHz L Frequency
  • 150-250 kHz H Frequency
  • Bronze
  • 1 kW
  • Wide 25° Beam
Online
$2070.02for Each
Retail $2235.00
Mfr PN: B275C-LHW-MM
Stock: 4

Airmar B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20º Airmar B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20º
Online
$354.66for Each
Retail $399.00
Mfr PN: B60-20-HB
Stock: 0

B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20º


The bronze B60-20º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.

Features:

  • Engineered for center-console and trailered boats
  • Low-profile protrusion below the hull
  • No affect on your boats running performance
  • Arrow on cap points toward keel when installed
  • Built-in temperature sensor
  • Boat Size: Up to 8 m (25')
  • Bronze transducer housing

Specifications:

  • Weight: 1.4 kg (3 lb)
  • Hull Deadrise: Up to 24°
  • Acoustic Window: Urethane
Online
$354.66for Each
Retail $399.00
Mfr PN: B60-20-HB
Stock: 0

Airmar B75H Bronze Chirp Thru Hull 20° Tilt - 600W - Requires Mix and Match Cable Airmar B75H Bronze Chirp Thru Hull 20° Tilt - 600W - Requires Mix and Match Cable
Online
$770.08for Each
Mfr PN: B75C-20-H-MM
Stock: 4

B75H Bronze Chirp Thru Hull 20° Tilt - 600W

Requires Mix and Match Cable

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

  • Depth & fast-response water-temperature sensor
  • High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth
  • 20° tilted versions, 600W
  • 80 kHz of total bandwidth from one transducer
  • Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
  • Bronze transducer housing
  • Boat Size: Up to 8 m (25’)
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$770.08for Each
Mfr PN: B75C-20-H-MM
Stock: 4

Airmar B75M Bronze Chirp Thru Hull 12° Tilt - 600W - Requires Mix and Match Cable Airmar B75M Bronze Chirp Thru Hull 12° Tilt - 600W - Requires Mix and Match Cable
Online
$806.06for Each
Mfr PN: B75C-12-M-MM
Stock: 0

B75M Bronze Chirp Thru Hull 12° Tilt - 600W

Requires Mix and Match Cable

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 70 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

  • Depth & fast-response water-temperature sensor
  • Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
  • 12° tilted version, 600W
  • 50 kHz of total bandwidth from one transducer
  • Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
  • Bronze transducer housing
  • Boat Size: Up to 8 m (25’)
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$806.06for Each
Mfr PN: B75C-12-M-MM
Stock: 0

Airmar B75M Bronze Chirp Thru Hull 20° Tilt - 600W - Requires Mix and Match Cable Airmar B75M Bronze Chirp Thru Hull 20° Tilt - 600W - Requires Mix and Match Cable
Online
$806.06for Each
Mfr PN: B75C-20-M-MM
Stock: 0

B75M Bronze Chirp Thru Hull 20° Tilt - 600W

Requires Mix and Match Cable

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 70 kHz of total bandwidth in just one installation, saving customers time and money.

Features:

  • Depth & fast-response water-temperature sensor
  • Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
  • 20° tilted version, 600W
  • 50 kHz of total bandwidth from one transducer
  • Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
  • Bronze transducer housing
  • Boat Size: Up to 8 m (25’)
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
Online
$806.06for Each
Mfr PN: B75C-20-M-MM
Stock: 0

Airmar B765C-LM Bronze CHIRP Transducer - Needs Mix & Match Cable - Does NOT Work w/Simrad & Lowrance Airmar B765C-LM Bronze CHIRP Transducer - Needs Mix & Match Cable - Does NOT Work w/Simrad & Lowrance
Online
$1237.88for Each
Mfr PN: B765C-LM-MM
Stock: 0

B765C-LM Bronze CHIRP Transducer - Needs Mix & Match Cable - Does NOT Work with Simrad & Lowrance

Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 85 kHz of total bandwidth in just one installation, saving customers time and money.

A Thru-Hull Chirp transducer perfectly suited for smaller fishing boats, the B765L/M Chirps across the following bandwidths:*L/M -Low Frequency 40-75 kHz, Medium Frequency 80-130 kHz

* Please Note: The low frequency operating band is 300 W. The medium frequency operating band is 600 W.

Features

  • Depth & fast-response water-temperature sensor
  • Low—CHIRPS from 40 kHz to 75 kHz, 32° to 21° beamwidth
  • Medium—CHIRPS from 80 kHz to 130 kHz, 24° to 16° beamwidth
  • 85 kHz of total bandwidth from one transducer
  • Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidth
  • All the advantages of the larger Thru-Hull Chirp transducers, suitable for smaller boats
  • Bronze transducer housing with High-Performance Fairing
  • Boat Size: Up to 9 m (30’) and above
  • Hull Type: Fiberglass or wood
  • Exclusive Xducer ID® technology
  • Hull Deadrise: Up to 24° with a fairing
  • Acoustic Window: Urethane
  • Weight: 2.5 kg (5.5 lb)
Online
$1237.88for Each
Mfr PN: B765C-LM-MM
Stock: 0

Airmar Deadrise Angle Finder - Accuracy of ± 1/2(o) Airmar Deadrise Angle Finder - Accuracy of ± 1/2(o)
Online
$16.64for Each
Retail $34.99
Mfr PN: ANGLE FINDER
Stock: 0
Deadrise Angle Finder - Accuracy of ± 1/2°

Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.

Features:
  • Quickly measures boat hull deadrise angle.
  • Ball Bearing construction for accuracy.
  • Attach to straight edge or framing square
  • Handy angle and grade chart on back of unit
Online
$16.64for Each
Retail $34.99
Mfr PN: ANGLE FINDER
Stock: 0

Airmar DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20° Airmar DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20°
Online
$390.97for Each
Mfr PN: DT820PV-235-N2
Stock: 0

DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20°

  • Function: Depth / Temperature, Material: Plastic, Fixed Tilt Angle: 20°
  • Frequency: 235 kHz, Cone: 12°, Power: 100 Watts RMS
  • Connector: 5-Pin NMEA 2000

Features:

  • Low-profile, retractable, thru-hull transducer offers depth and temperature functions in a single, compact housing
  • Tilted Element Transducer – unique design tilts ceramic element inside transducer housing, giving all the advantages of a fairing block without a hull protrusion
  • Available in fixed 0°, 12° or 20° tilt – perfect for power and sail boat applications
  • Low-profile housing compensates for hull deadrise, does not affect hull performance and provides accurate readings at high speeds
  • Designed with Airmar's exclusive Broadband Ceramic Technology, 235 kHz element improves resolution without sacrificing sensitivity
  • Smart™ Sensor with embedded microelectronics – transducer element and signal processor are only millimeters apart
  • 235 kHz frequency prevents mutual interference with other echo sounders on vessel
  • Retractable housing with self-closing valve minimizes water flow into the vessel when transducer is removed for servicing

Specifications:

  • Mount: Thru-hull
  • Fixed Element Tilt Angle: 20° (for 16° - 24° hull deadrise)
  • Housing Material: Plastic
  • Connector: 5-pin NMEA 2000®
  • Cable Length: 20 ft.
  • Frequency: 235 kHz
  • Cone: 12°
  • Power: 100 Watts RMS
  • Depth Sensor Range: 1.6 - 594 ft.
  • Acoustic Window Material: Urethane
  • Compatible Hull Materials: Fiberglass or metal
  • Hole Diameter for Installation: 2"
  • Dimensions: 4.92" H x 2.94" OD
Online
$390.97for Each
Mfr PN: DT820PV-235-N2
Stock: 0

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About Us   Contact Us   Customer Service & Policies   Merchant Service   Privacy Statement   Customer Feedback  Return Policy

Copyright © 1999-2022 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.