This wire terminal kit is organized for quick and professional repairs. It is equipped with a wire cutting crimping tool with comfortable insulated handles and assorted color coated gauge sizes. Comes in a see through storage case.
|
|
• Works with CAT-6A/CAT-7 shielded RJ45 modular plugs;• All-steel frame with rust-resistant black oxide finish;• Rugged blue PVC handles;• Front loading;• Consistent, repeatable terminations;
|
Double Crimp Ratchet Tool for 26-10 AWG
This tool includes a double crimp mechanism that crimps stranding and insulation portion of Ancor connectors in one motion for superior strain relief of vinyl and nylon terminals. Features:
|
High-leverage tool with comfort grip handles, crimping die and side cutters. UL approved when used with GB #310, 410, and 411 crimp connectors for permanent connections.
Lgth In=9-1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
6 to 1/0 AWG Heavy-Duty Hex Lug & Terminal Crimper
This crimper uses revolving dies to create a hex style crimp for 6 AWG to 1/0 AWG Length 15.4" (39 cm)
|
Single Crimp Ratchet Tool
This single crimp ratchet tool crimps 22-8 AWG heat shrink, vinyl and nylon insulated terminals and connectors. Features:
|
• Tool installation kit for terminating RJ-45 modular plugs to twisted pair cable;• Crimps standard, Feed-Thru and shielded CAT5e, CAT6 and CAT6A modular plugs;• Spare slot in pouch to hold 35-485 Punch Down Tool;• Includes FT-45(TM) Feed-Thru Modular Plug Crimp Tool (30-495), PrepPRO(R) stripper (45-605), scissors (35-088) and pouch with clip;
|
Ratcheting Wire Terminal Crimper with adjustable crimping compression and has a ratcheting mechanism design with color coded wire sizes, 10-22AWG, Red: 22-18AWG-DIN 0.5-1.0mm.Titan Tools 11477 Ratcheting Wire Terminal Crimper
|
|
|
|
2-2330 CRIMPING TOOL
|
Electrician's Scissors & Cable Splicer's Knife Set - Tempered Steel Electricians Scissors and knife for any job.Electrician's Scissors & Cable Splicer's Knife Set features include:
Below is more info on our Electrician's Scissors & Cable Splicer's Knife Set Description: Scissors and knife kit with two-pocket pouchBox Qty: 12 Case Qty: 72 This item does not ship to APO/FPO addresses. |
Controlled Cycle Non-Insulated Terminal Crimp Tool #22 - #8 - For Crimping Non-Insulated Terminals - Ring, Fork/Spade, Butt Splice, Parallel SpliceControlled Cycle Non-Insulated Terminal Crimp Tool #22 - #8 features include:
Below is more info on our Controlled Cycle Non-Insulated Terminal Crimp Tool #22 - #8 Length: 1"Box Qty: 2 This item does not ship to APO/FPO addresses. |
CRIMPING / CUTTING CONNECTOR TOOL
Accommodates wire from #10 to 22 AWG
Specially hardened wire cutter in nose
Tapered nose design for confined space work
Crimping die marked for insulated & non -
insulated solderless terminals & connectors
Plastic-dipped, cushioned handles for comfort
1005 CRIMPING / CUTTING TOOL
SIZE:9-3/4" Length
COLOR:Red Grips
|
500 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need.500 Piece Terminal Kit with Controlled Cycle Crimp Tool features include:
Below is more info on our 500 Piece Terminal Kit with Controlled Cycle Crimp Tool Kits/Case: 5 This item does not ship to APO/FPO addresses. |
Controlled Cycle Heat Shrink Terminal Crimp Tool #22 - #10 - For Crimping Heat Shrink Terminals and Insulated Crimp SleevesControlled Cycle Heat Shrink Terminal Crimp Tool #22 - #10 features include:
Below is more info on our Controlled Cycle Heat Shrink Terminal Crimp Tool #22 - #10 Length: 1"Box Qty: 2 This item does not ship to APO/FPO addresses. |
- RG6 and RG59 Coaxial Cable Compression Tool and Instructions
- Avoids over-crimping by pressing the connector vertically onto the cable without causing bends and distortion to the waveguide cavity, thus improving signal quality and preventing connectivity degradation over time - Ergonomic design providing a firm comfortable grip and preventing slippage during compression - Steel body constructions for added strength and durability - Suitable for use with RG59, RG6 and RG6 quad cables - Use with all most standard F-type, RCA, and BNC connectors |
Controlled Cycle Insulated Disconnect Crimp Tool #22 - #10 - For Crimping Insulated Terminals - Male & Female DisconnectsControlled Cycle Insulated Disconnect Crimp Tool #22 - #10 features include:
Below is more info on our Controlled Cycle Insulated Disconnect Crimp Tool #22 - #10 Length: 1"Box Qty: 2 This item does not ship to APO/FPO addresses. |
Controlled Cycle Ferrule Crimp Tool #22 - #10 - For Crimping Ferrules #22 - #10Controlled Cycle Ferrule Crimp Tool #22 - #10 features include:
Below is more info on our Controlled Cycle Ferrule Crimp Tool #22 - #10 Length: 1"Box Qty: 2 This item does not ship to APO/FPO addresses. |
Non-Insulated Terminal #6-1/0 & Insulated #8-#2 Crimp Tool - For Crimping Insulated and Non-Insulated TerminalsNon-Insulated Terminal #6-1/0 & Insulated #8-#2 Crimp Tool features include:
Below is more info on our Non-Insulated Terminal #6-1/0 & Insulated #8-#2 Crimp Tool Length: 16"Box Qty: 1 This item does not ship to APO/FPO addresses. |
Controlled Cycle Insulated Terminal Crimp Tool #22 - #10 - For Crimping Insulated Terminals - Ring, Fork/Spade, Butt Splice, Parallel Splice, Blade Type TerminalsControlled Cycle Insulated Terminal Crimp Tool #22 - #10 features include:
Below is more info on our Controlled Cycle Insulated Terminal Crimp Tool #22 - #10 Length: 1"Box Qty: 2 This item does not ship to APO/FPO addresses. |
Non Insulated Terminal Crimp Tool #16 - #6 - For Crimping Non-Insulated Terminals OnlyNon Insulated Terminal Crimp Tool #16 - #6 features include:
Below is more info on our Non Insulated Terminal Crimp Tool #16 - #6 Length: 11"Box Qty: 2 This item does not ship to APO/FPO addresses. |
Controlled Cycle Flag Disconnect Crimp Tool #22 - #14 - For Crimping Insulated Terminals - Male & Female Flag Right Angle DisconnectsControlled Cycle Flag Disconnect Crimp Tool #22 - #14 features include:
Below is more info on our Controlled Cycle Flag Disconnect Crimp Tool #22 - #14 Length: 1"Box Qty: 2 This item does not ship to APO/FPO addresses. |
TRENDnet's Professional Crimp Tool TC-CT68 ---For your variety of network needs TRENDnet has a tool specifically designed to maintain network accessories. Our professional crimp tool TC-CT68 crimps strips and cuts cable for 8 and 6 position modular plugs. The crimp tool offers reliable easy-to-use and affordable solution to meet immediate cutting needs. Our professional crimp tool delivers convenience at a very economical price. RoHS Compliant
|
• Linear stroke for consistent compression results & easy operations ;• 4 RTQ(TM) F-connectors ;• Adjustable for F/BNC/RCA ;• Durable & rugged zinc die-cast body ;• Made in the USA of US & global components ;• Includes 4 RTQ(TM) RG6 F-connectors;
|
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |