• 8 position, 8 contact RJ-45 modular plug for CAT6, 100 ohm balanced twisted pair 250 MHz cables;• 50 micron gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles;• Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports;• Designed to work seamlessly with IDEAL(R) Telemaster(TM) crimping tools ;• Also compatible with industry standard modular plug crimping tools meeting specifications;• Not compatible with Crimpmaster RJ-45 die set;• 3 prong contact design for use with solid or stranded 23 to 24 AWG insulated copper conductors;
|
• For shielded or unshielded CAT-6A, CAT-6, or CAT-5E with insulated conductor diameter of .040 in. to .048 in., maximum jacket diameter of .32 in.;• Shield continuity can be made internally by folding the cable foil around the jacket and making contact with the inside of the connector walls or externally by wrapping the cable drain wire around the base of the jacket strain relief clip;• Jacket strain relief is prepositioned in the up position so cable insertion is simplified;• Pre-formed clip can be closed and crimped with a standard needle-nose or plier-nose device;• Requires the IDEAL(R) FT-45(TM) Crimp Tool to properly terminate;• 25-pack;
|
C2G HDMI Inline Extender Decorative Wall Plate 4K 60Hz
This item cannot be shipped to APO/FPO addresses. Please accept our apologies.
|
- Gray High Definition Cat 6 Modular Keystone Jack 25 Pack
- CAT 6 rated connectors provide excellent performance for data networks requiring maximum speed and bandwidth - PCB technology provides maximum performance and superior signal quality - Reduced rear footprint allows for greater connectivity density and provides for more port configurations in a smaller area - Enhanced crosstalk cancellation reduces return loss and improves performance by rejecting noise and unwanted signals - Exceeds ANSI/TIA/EIA-568-B.2-1 Category 6 connecting hardware requirements - Designed with in-line 110 IDC, in-sequence termination reducing termination time - One piece termination cap allows for a quick and easy termination - Includes an integrated TIA-568A/B color wiring diagram - Backwards compatible to all lower rated category components - Compatible with all faceplates, inserts, surface mount boxes, and blank patch panels - Compatible with all furniture faceplates, bezels, and surface mount boxes - Compatible with ICC termination tools ICACSPDT00 and ICACSPDTEH - Available in blue, ivory, orange, red, black, and white - 25 modules packaged in packaging bag with 25 termination caps packaged in a separated bag and included in packaging - Installation instructions included - UL listed |
- CAT6 rated connectors provide excellent performance for data networks
- PCB technology provides maximum performance and superior signal quality - Enhanced crosstalk cancellation reduces return loss and improves performance - Rejecting noise and unwanted signals - Exceeds ANSI/TIA-568-C.2 Category 6 connecting hardware requirements - Designed with rear split back 110 IDC reducing termination time - Terminate with 110 punch down tool - Reduced rear footprint allows for greater connectivity density - Provides for more port configurations in a smaller area - Includes an integrated TIA-568A/B color wiring diagram - Backward compatible with all lower rated category components - Works with all Work Area Outlets faceplates, inserts, surface mount boxes - Used with Category 6 patch cords - Exceeds ANSI/TIA-568-C requirements for permanent performances - UL 1863 Compliant |
- CAT6 rated connectors provide excellent performance for data networks
- PCB technology provides maximum performance and superior signal quality - Enhanced crosstalk cancellation reduces return loss and improves performance - Rejecting noise and unwanted signals - Exceeds ANSI/TIA-568-C.2 Category 6 connecting hardware requirements - Designed with rear split back 110 IDC reducing termination time - Terminate with 110 punch down tool - Reduced rear footprint allows for greater connectivity density - Provides for more port configurations in a smaller area - Includes an integrated TIA-568A/B color wiring diagram - Backward compatible with all lower rated category components - Works with all Work Area Outlets faceplates, inserts, surface mount boxes - Used with Category 6 patch cords - Exceeds ANSI/TIA-568-C requirements for permanent performances - UL 1863 Compliant |
- Section of wall sockets series SBB1 used to organize user telecommunications outlet
- Inside the case are installed modules Keystone Jack - Product is compatible with all modules (inserts) type Keystone Jack - Optional equipment: telephone module, communication module Cat.5/5e/6 |
• For shielded or unshielded CAT-6A, CAT-6, or CAT-5E with insulated conductor diameter of .040 in. to .048 in., maximum jacket diameter of .32 in.;• Shield continuity can be made internally by folding the cable foil around the jacket and making contact with the inside of the connector walls or externally by wrapping the cable drain wire around the base of the jacket strain relief clip;• Jacket strain relief is prepositioned in the up position so cable insertion is simplified;• Pre-formed clip can be closed and crimped with a standard needle-nose or plier-nose device;• Requires the IDEAL(R) FT-45(TM) Crimp Tool to properly terminate;• 50-ct jar;
|
|
Allows a single 1-line or 2-line jack to accept a second telephone device. Gold plated contacts in modular connectors ensure quality sound. Helpful for connecting answering systems or fax machines into the same line jack as a telephone.
|
6-Conductor Modular Flush Mount For use with 1-3 Phone Lines
|
6-Conductor Modular Flush Mount For use with 1-3 Phone Lines
|
- ICC bridge clips
- 100 per package - Electrically interconnect adjacent terminals -Tin plated phosphor bronze |
- Configured to fit standard single gang outlet box
- Designed to support the distribution of voice, data, and other communication needs to the work area for commercial or residential applications - Rugged and durable construction - Works with all ICC modular connectors that easily snap in - UL Listed - ICCFACE1BK |
- Faceplate
- 2 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design - Contemporary design - Stainless steel |
- ICC Category 5E modular connector
- 8 Conductor - 8 Position - Designed for high-speed network applications - Includes a one-piece termination cap that reduces installation time by allowing simultaneous 4-pair termination - For use with applications: 100Base-T, ATM-155 Mbps, 100Base-TX, 100VG-anyLAN, 10Base-T, 4/16 Mbps Token Ring, TP-PMD (CDDI) - Compatible with all ICC faceplates, inserts, bezels, and blank patch panels - 25 Pack - Blue - ICCCAT5JKPKBL |
- IC107SF1SS - 1Port Face Stainless Steel
-Faceplate - 1 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design - Contemporary design - Stainless steel |
- Faceplate
- 3 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design - Contemporary design - Stainless steel |
Single RJ11 4 Conductor Phone Jack & Single F Conductor Wallplate Ivory - A Combination Phone and Cable Jack for home or office installation.Single RJ11 4 Conductor Phone Jack & Single F Conductor Wallplate Ivory features include:
Below is more info on our Single RJ11 4 Conductor Phone Jack & Single F Conductor Wallplate Ivory Color: IvoryBag Qty: 1 Master Box Qty: 1 This item does not ship to APO/FPO addresses. |
Voice-grade
50 pair block USOC wired 66 Block wired with Twelve 4-Conductor RJ11 Jacks (for two lines per drop) |
- ICC Category 5Emodular connector
- 8 Conductor - 8 Position - Designed for high-speed network applications - Includes a one-piece termination cap that reduces installation time by allowing simultaneous 4-pair termination - For use with applications: 100Base-T, ATM-155 Mbps, 100Base-TX, 100VG-anyLAN, 10Base-T, 4/16 Mbps Token Ring, TP-PMD (CDDI) - Compatible with all ICC faceplates, inserts, bezels, and blank patch panels - Sold individually (price is per jack) - Black - ICCCAT5JACKBK |
- ICC category 5E modular connector
- 8 Conductor - 8 Position - Designed for high-speed network applications - Includes a one-piece termination cap that reduces installation time by allowing simultaneous 4-pair termination - For use with applications: 100Base-T, ATM-155 Mbps, 100Base-TX, 100VG-anyLAN, 10Base-T, 4/16 Mbps Token Ring, TP-PMD (CDDI) - Compatible with all ICC faceplates, inserts, bezels, and blank patch panels - Sold individually (priceis per jack) - Blue - ICCCAT5JACKBL |
- ICC Category 5Emodular connector
- 8 Conductor - 8 Position - Designed for high-speed network applications - Includes a one-piece termination cap that reduces installation time by allowing simultaneous 4-pair termination - For use with applications: 100Base-T, ATM-155 Mbps, 100Base-TX, 100VG-anyLAN, 10Base-T, 4/16 Mbps Token Ring, TP-PMD (CDDI) - Compatible with all ICC faceplates, inserts, bezels, and blank patch panels - Sold individually (price is per jack) - Ivory - ICCCAT5JACKIV |
- ICC Category 5E modular connector
- 8 Conductor - 8 Position - Designed for high-speed network applications - Includes a one-piece termination cap that reduces installation time by allowing simultaneous 4-pair termination - For use with applications: 100Base-T, ATM-155 Mbps, 100Base-TX, 100VG-anyLAN, 10Base-T, 4/16 Mbps Token Ring, TP-PMD (CDDI) - Compatible with all ICC faceplates, inserts, bezels, and blank patch panels - Sold individually (price is per jack) - White - ICCCAT5JACKWH |
- Faceplate
- 1 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design - Contemporary design - White |
- Faceplate
- 2 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design -Contemporary design - White |
- Faceplate
- 3 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design -Contemporary design - White |
-Faceplate
- 4 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design - Contemporary design - Stainless steel |
- Faceplate
- 4 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design - Contemporary design - White |
- Viking FaxJack phone/fax switch
- Allows any business, largeor small, to enjoy the convenience of automated data transmission without the perpetual monthly expense of a dedicated phone line - Versatile phone/data/fax switch with the ability to automaticallyroute calls via fax CNG tone, central office distinctive ring, or touch tones included in the dial string by the calling party - Offers full manual transfer capabilities - Stores and retransmitscaller ID information so that it is truly caller ID compatible - Applications: governmental, commercial, home office, industrial, personal computers, vending machines, remote access applications, point-of-sale terminals, fast food chains, retail stores, convenience stores - Four ports allow any four analog devices to share a single line - Routes calls via CNG tone, distinctive ringing, touch tones sent by calling device or manually - Provides realistic ring-back tones while re-ringing selected device - Transfer from one port to another as often as may be required during the samecall - Caller ID information is stored and retransmitted during transfer - Automatic privacy eliminates interruptions on both in and outbound calls - Monitors for calling party control (CPC) - All in and outbound calls are routed to the phone port during a power failure - Power: 120VAC/12V DC 500mA, UL listed adapter provided - CNG Detection: 1100 Hz burst - Connections: (1)10-position cage clamp terminal strip - VKFAXJ1000 |
- Faceplate
- 2 Port - Single gang - Port fits all ICC jacks and modules - Easy snap-in port design -Contemporary design - Ivory |
|
|
|
|
Copyright © 1999-2022 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |