Easily drill into wood, brick and block walls, or metal with the Pro-Series 3/8 Inch Electric Drill. This Electric Drill is ideal for DIY, home improvement and general maintenance projects around the house. Hang shelving in the shop or garage, hang decorative shutters and flower boxes on your brick house, or secure railings and fencing to concrete pads.

The adjustable trigger dial helps to prevent stripping of the screw while drilling and driving into hardwood or masonry. It features a 3/8 inch chuck, a forward/reverse switch, and a zero to 3,000 variable speed. A built in level on the top of the drill takes the guess work out of straight or angled drilling and driving.

• For DIY, home improvement and general maintenance projects
• Handy tool for wood, masonry and metal projects
• Adjustable trigger dial for drilling, driving and removing screws, nuts and bolts
• 3/8 in. chuck, 380 watt / 120 volt /60 hz
• 0-3,000 RPM (no-load) variable speed
• Forward / reverse lock-on button
• Built-in level

This variable speed, reversible drill features a beefy 4.9 amp motor for powering through those tough jobs. Bit installation is a snap with the nifty keyless chuck system. The larger trigger switch won't wear out your trigger finger. This baby is easy on the ears with a decibel rating of 79dB. Its clever inline handle design maximizes power thrust. To extend tool life, Makita designed this double insulated tool with all ball bearing construction, as usual. Includes: D-35318 Hex Shank D-Bit 5Pk and T-01373 38 Pieces Bit Set.

Feature:

• Powerful 49 AMP motor w/ quiet operation of 79dB
• Keyless chuck for fast and easy bit installation & removal
• Variable speed
• Large trigger and Lock-on button
• In-line handle design for better control
• Includes: D-35318 Hex Shank D-Bit 5Pk and T-01373 38 Pieces Bit Set

The Makita 3/4 in. Hammer Drill is powered by a 6.6 AMP motor that is engineered for the most demanding applications. The HP2050 features a torque-limiting clutch that disengages automatically if the bit binds, and a positive-stop mode selector that helps prevent accidental mode disengagement. Additional features include less weight (only 5.6 lbs.), a large trigger switch, and an ergonomic rubberized grip for increased comfort. Includes bonus D-23765 Drill Bit Set.

Feature:

• Powerful 66 AMP motor for the most demanding applications
• 2-mode op for "Rotation Only" or "Hammering with Rotation"
• Variable 2-speed (0-1,200 & 0-2,900 RPM)
• Torque limiting clutch engineered to reduce gear damage
• Air vent holes supply required ventilation
• Includes D-23765 Drill Bit Set

This variable speed, reversible drill features a beefy 4.9 amp motor for powering through those tough jobs. Bit installation is a snap with the nifty keyless chuck system. The larger trigger switch won't wear out your trigger finger. This baby is easy on the ears with a decibel rating of 79dB. Its clever inline handle design maximizes power thrust. A large, recessed lock-on button will get you through those long jobs. And to extend tool life, Makita designed this double insulated tool with all ball bearing construction, as usual.

Feature:

• Powerful 4.9 AMP motor w/ quiet operation of 79dB.
• Keyless chuck for fast and easy bit installation & removal
• Variable speed
• Large trigger and Lock-on button.
• In-line handle design for better control.
• All ball bearing construction.

The 18V LXT+ Lithium-Ion 1/2" Hammer Driver-Drill delivers a full 750 in.lbs. of Max Torque, with more work &less down time for increased efficiency &productivity. It's powered by the Makita 18V LXT+ Lithium-Ion 4.0Ah battery, which reaches a full charge in only 40 minutes. For added convenience, the battery features an integrated L.E.D. battery charge level indicator. For increased durability, Extreme Protection Technology (XPT+) is engineered inside the tool for increased resistance to water and dust and improved operation in harsh jobsite conditions.

Feature:

• Mechanical 2-speed transmission
• Compact and ergonomic design at only 8-7/8" long
• Weighs only 5.1 lbs. with battery for reduced operator fatigue
• Engineered to provide increased dust and water resistance in harsh job site conditions

The Makita 3/4 in. Hammer Drill is powered by a 6.6 AMP motor that is engineered for the most demanding applications. The HP2050 features a torque-limiting clutch that disengages automatically if the bit binds, and a positive-stop mode selector that helps prevent accidental mode disengagement. Additional features include less weight (only 5.6 lbs.), a large trigger switch, and an ergonomic rubberized grip for increased comfort.

Feature:

• Powerful 6.6 AMP motor for the most demanding applications
• 2-mode op. for "Rotation Only" or "Hammering with Rotation"
• Variable 2-speed (0-1,200 & 0-2,900 RPM)
• Torque limiting clutch engineered to reduce gear damage
• Air vent holes supply required ventilation

Drill kit is compact in size and able to fit into tool pouches for the tradesman and accommodate users that like a smaller lighter driver drill that will still get the work done. Makita's 12v max Lithium-Ion batteries provide longer run time and lower self-discharge. The battery re-charges in 50 minutes allowing for more work. The charger earned the ENERGY STAR label for meeting the strict energy-efficient guidelines set by the US Environmental Protection Agency (EPA) and US Department of Energy (DOE).

Feature:

• 200-Inch lbs of Max Torque in an ultra compact design
• Variable 2-speed design (0-350 and 0-1,300 RPM) c
• Ultra compact design at 7-7/16" long and weighs only 2.2 lb
• Built-in L.E.D. light illuminates the work area
• Ergonomic shape fits like a glove with even pressure