• Chemical and corrosion resistant polypropylene and stainless steel construction
• Selector lever can be padlocked (lock not included) and/or sealed in either position
• Ports can be rotated so discharge plumbing can be routed away in parallel, at 900 or in opposite directions, or either up or down without disassembly
• Valve is supplied with both 1-1/2" (38 mm) ports (fitted) and extra 1" (25 mm) straight inlet port
• Optional shaft extension allows valve to be mounted through a bulkhead up to 1-3/4" thick with only the selector handle exposed
• Self cleaning design provides trouble free operation
• Molded in flow direction indicator arrows
• Easy access to three sturdy mounting feet for quick and simple installation
• Easy access to valve by removal of just three hex head machine screws, top cover and diverter assembly lift away from the body

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
  
• Simple design means fewer wearing parts.
  
• ISO 8846 MARINE (Ignition protection).
  
• ISO 8849 MARINE (Bilge pump standard).

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
  
• Simple design means fewer wearing parts.
  
• ISO 8846 MARINE (Ignition protection).
  
• ISO 8849 MARINE (Bilge pump standard).

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Directly replaces manual pump assembly
  
• Easy to Install
  
• Simple to operate
  
• Dual action control allows water level to be varied
  
• Fits all Jabsco and Par 29090 and 29120 standard and large bowl toilets. Adaptors available to fit many other makes
  
• Suitable for use in above or below waterline installations
  
• Built in macerator
  
• Meets EN50081-2 for Electro Magnetic Compatibility (EMC)
  
• Meets ISO 8846 MARINE and USCG 183.410 for Ignition protection
  
• Self priming up to 0.6m(2ft)
  
• Waste pump discharges over an anti siphon loop up to 1.8m(6ft) and out of a through hull fitting down to 0.9m(3ft) below the surface
  
• Typical power consumption is less than 1.0 amp hour(12 Volt)

• Includes Run-Dry Protection Device
  
• 9 GPM (34 LPM) flow rate
  
• Approximately 80 pounds of water ballast per minute
  
• Self-priming to 3'
  
• Reversible pump both fills and empties ballast tanks
  
• Reversing switch
  
• Ignition protected

• 1" (25mm) hose barb external
  
• 1/2" NPT internal

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Dimensions: 7"L x 12" W x 7"H; Cable Length: 396"
• Made of Plastic
• Flow Control
• Ceramic impeller shafts for long life
• Reliable and quiet submersible water pump
• Oil-free, magnetic-driven, epoxy protected, ceramic shaft
• 3 Year Limited Warranty

• Dimensions: 7"D x 12"H
• Made of Plastic
• Cost- saving energy efficient operation+
• Ceramic impeller shafts for long life
• Heavy-Duty Waterfall Appliaction
• Oil-free, magnetic-driven, epoxy protected, ceramic shaft
• 3 Year Limited Warranty

• Dimensions: 2"L x 2"W x 2"H
• Made of Plastic
• Flow Control
• Ceramic impeller shafts for long life
• Reliable and quiet submersible water pump
• Oil-free, magnetic-driven, epoxy protected, ceramic shaft
• 1 Year Limited Warranty

• Dimensions: 6"L x 8"W x 9"H; Cable Length: 396"
• Made of Plastic
• Cost- saving energy efficient operation+
• Ceramic impeller shafts for long life
• Heavy-Duty Waterfall Appliaction
• Oil-free, magnetic-driven, epoxy protected, ceramic shaft
• 3 Year Limited Warranty

• Dimensions: 5"L x 3"W x 4"H
• Made of Plastic
• Flow Control
• Ceramic impeller shafts for long life
• Reliable and quiet submersible water pump
• Oil-free, magnetic-driven, epoxy protected, ceramic shaft
• 3 Year Limited Warranty