1. Home:
  2. showbrand
 

Shop by Brand: CIPA

Items 1- 32 of 429 total

11" x 14" Wide Angle Lens 11" x 14" Wide Angle Lens
Online
$12.30for Each
Mfr PN: 60300
Stock: 1508
Our 11" x 14" Wide Angle Lens enables you to see an enlarged view not available through your inside rearview mirror or side mirror. It dramatically increases visibility and confidence when parallel parking or backing up. The Wide Angle Lens is flexible and easy to attach. It easily applies to the inside of your rear window to eliminate rearview blind spots and increase viewing. Thin polyvinyl construction clings to your window without using glue adhesive. The Wide Angle Lens will not turn yellow or damage your glass. It becomes crystal clear 24 hours after application, and will stay on until peeled off. It can be cleaned using mild detergent and water. The Wide Angle Lens can be used for other applications as well. For example, a lower view can be achieved by applying the Wide Angle Lens to the inside of an office window in a high building. They can also be cut by scissors into smaller pieces for small window applications. The CIPA Wide Angle Lens is also available in 6" x 8" (part number 60200), and in 8" x 10" (part number 60100) sizes. Perfect for minivans, SUVs, wagons, hatchbacks, cargo vans, and RVs. Expand your Horizons
  • Eliminates rearview blind spots and increases safety
  • Dramatically increases visibility and confidence when parallel parking or backing up
  • Flexible and easy to attach
  • Can be can cleaned using mild detergent and water
  • Useful for other types of applications
  • Limited 1 Year Warranty
Online
$12.30for Each
Mfr PN: 60300
Stock: 1508

6" x 8" Wide Angle Lens 6" x 8" Wide Angle Lens
Online
$8.22for Each
Mfr PN: 60200
Stock: 206
Our 6" x 8" Wide Angle Lens enables you to see an enlarged view not available through your inside rearview mirror or side mirror. It dramatically increases visibility and confidence when parallel parking or backing up. The Wide Angle Lens is flexible and easy to attach. It easily applies to the inside of your rear window to eliminate rearview blind spots and increase viewing. Thin polyvinyl construction clings to your window without using glue adhesive. The Wide Angle Lens will not turn yellow or damage your glass. It becomes crystal clear 24 hours after application, and will stay on until peeled off. It can be cleaned using mild detergent and water. The Wide Angle Lens can be used for other applications as well. For example, a lower view can be achieved by applying the Wide Angle Lens to the inside of an office window in a high building. They can also be cut by scissors into smaller pieces for small window applications. The CIPA Wide Angle Lens is also available in 8" x 10" (part number 60100), and in 11" x 14" (part number 60300) sizes. Perfect for minivans, SUVs, wagons, hatchbacks, cargo vans, and RVs. Expand your Horizons
  • Eliminates rearview blind spots and increases safety
  • Dramatically increases visibility and confidence when parallel parking or backing up
  • Flexible and easy to attach
  • Can be can cleaned using mild detergent and water
  • Useful for other types of applications
  • Limited 1 Year Warranty
Online
$8.22for Each
Mfr PN: 60200
Stock: 206

8" x 10" Wide Angle Lens 8" x 10" Wide Angle Lens
Online
$8.82for Each
Mfr PN: 60100
Stock: 1102
Our 8" x 10" Wide Angle Lens enables you to see an enlarged view not available through your inside rearview mirror or side mirror. It dramatically increases visibility and confidence when parallel parking or backing up. The Wide Angle Lens is flexible and easy to attach. It easily applies to the inside of your rear window to eliminate rearview blind spots and increase viewing. Thin polyvinyl construction clings to your window without using glue adhesive. The Wide Angle Lens will not turn yellow or damage your glass. It becomes crystal clear 24 hours after application, and will stay on until peeled off. It can be cleaned using mild detergent and water. The Wide Angle Lens can be used for other applications as well. For example, a lower view can be achieved by applying the Wide Angle Lens to the inside of an office window in a high building. They can also be cut by scissors into smaller pieces for small window applications. The CIPA Wide Angle Lens is also available in 6" x 8" (part number 60200), and in 11" x 14" (part number 60300) sizes. Perfect for minivans, SUVs, wagons, hatchbacks, cargo vans, and RVs. Expand your Horizons
  • Eliminates rearview blind spots and increases safety
  • Dramatically increases visibility and confidence when parallel parking or backing up
  • Flexible and easy to attach
  • Can be can cleaned using mild detergent and water
  • Useful for other types of applications
  • Limited 1 Year Warranty
Online
$8.82for Each
Mfr PN: 60100
Stock: 1102

Add-A-Signal Stick-On Directional Indicator Add-A-Signal Stick-On Directional Indicator
Online
$9.57for Pair
Retail $10.30
Mfr PN: 08800
Stock: 1884
Add-A-Signal Stick-On Directional Indicator lights increase safety when turning or changing lanes. Additional signals not only make your vehicle more visible, they alert other drivers of your movements. Our Add-A-Signal Stick-On Directional Indicator lights feature super-bright LED bulbs. The stick-on directional indicator is arrow shaped like the ones seen in factory mirrors. With an easy two wire hook up and press on installation, CIPA's Add-A-Signals are a simple way to increase your safety and improve the appearance of your vehicle! CIPA Add-A-Signals are universal and will work on all cars, trucks, vans, SUVs, and RVs.
  • A simple way to increase your safety
  • Easy stick on installation (some wiring required)
  • Super bright LED bulbs are long lasting and draw little power
  • Perfect for trailers, bumpers, mirrors, or anywhere
  • Sold as pairs
  • Limited 1 Year Warranty
Online
$9.57for Pair
Retail $10.30
Mfr PN: 08800
Stock: 1884

Adjustable Clip-On Mirror Adjustable Clip-On Mirror
Online
$13.60for Each
Mfr PN: 11952
Stock: 180
CIPA's Adjustable Clip-On Towing Mirror was designed with large and uniquely-shaped mirrors in mind. It fits factory mirrors that are 7" to 10" tall. Rubber straps secure the Clip-On Towing Mirror to your vehicle's existing mirror, and easy-to-adjust arms fit tightly for a steady vibration-free ride. The Adjustable Clip-On Towing Mirror extends your vision further than any OE mirror ever could with a total extension of 7 inches. This mirror will not obstruct your vehicle's existing viewing area. The Adjustable Clip-On Towing Mirror has a 4.75" by 7.5" mirror face that widens visibility, in addition to your factory mirror, for peace of mind while towing. The mirror head features a ball and socket mount which enables you to adjust the mirror head in any direction, and at any angle that you may need. The Adjustable Clip-On Towing Mirror is not position specific, so it can accommodate the driver side or the passenger side of your vehicle. Installation is simple and no tools are required. The Adjustable Clip-On Towing Mirror is perfect for temporary or light towing needs. It is not recommended to be used as a full time heavy-duty towing solution. For best results, remove the towing mirror when not in use, and store in a cool dry place. Mirrors come 1 per package. Expand your Horizons
  • Universal in application and position
  • Clips directly onto existing mirrors for quick setup with no tools required
  • Extends your towing vision up to 7"
  • Designed to fit large and uniquely shaped mirrors
  • A good economic alternative to expensive towing solutions
  • Limited 1 Year Warranty
Online
$13.60for Each
Mfr PN: 11952
Stock: 180

Auxiliary Mirror Mounting Kit Auxiliary Mirror Mounting Kit
Online
$2.96for Each
Mfr PN: 70324
Stock: 312
The Auxiliary Mirror Mounting Kit is a bracket for mounting and extending convex mirrors from other brackets, bars, or tubes. It is intended for round convex HotSpots that are 5 inch, 6 inch, 7.5 inch, and 8.5 inches in diameter. The bracket is universal in design, and can really be used for many projects that the avid Do It Yourselfer may be working on. It features a 4.5 inch stainless steel extension tube and comes with a rust resistant bracket, and rust resistant hardware. The Auxiliary Mirror Mounting Kit includes 1 extension tube, 1 bracket, 2 bolts, 2 nuts, and 2 lock washers. Expand your Horizons
  • Extends your vision through your CIPA HotSpots
  • Universal design
  • Easy bolt-on installation
  • Can be an extension or replacement solution
  • Rust and corrosion resistant
  • Limited 1 Year Warranty
Online
$2.96for Each
Mfr PN: 70324
Stock: 312

Bar-End ATV Mirror Bar-End ATV Mirror
Online
$18.21for Each
Mfr PN: 11132
Stock: 548
The Bar-End ATV Mirror features bar-end mounting that will work with most ATVs. The bar-end mounting feature offers the ability to mount the mirror quickly and easily into the handlebar, while keeping the mirror out of the way, and free from interfering with hand movement. The insertion knob on The Bar-End ATV Mirror is 5/8 of an inch in diameter, and the mirror head will sit 3 + inches away from the handlebar. The overall length of the mirror is 10 inches. The mirror head was designed using a "tear-drop" shape measuring 6 + inches long by 3 + inches high (at its largest point). The viewing surface measures 5 + inches long by 3 inches high. Please note: All measurements are approximate. Installation of the Bar-End ATV Mirror is easy. Start by simply sliding the insertion knob into the exposed handlebar. The mirror assembly then attaches by fastening it to the insertion knob using the supplied bolt, and turning until the mirror fits snuggly into the handlebar. The Bar-End ATV Mirror comes with a vibration-free convex safety lens to provide both safety and wide angle viewing while on your ATV. The mirror head adjusts in all directions using a ball and socket mount between the mirror head and mirror arm. The arm can also be adjusted for optimal viewing using a Phillips head screwdriver (not included). The Bar-End ATV Mirror is completely universal and can be used on snowmobiles, jet skis, motor-cross bikes, 4 wheelers, or bicycles. Package includes 1 universal (LH or RH) mirror, 1 insertion knob, 1 washer, 1 hex bolt, and 1 3/16" hex wrench.
  • Universal design allows for use on the left hand and/or right hand side of ATVs, snowmobiles, jet skis, motor-cross bikes, 4 wheelers, or bicycles
  • Will not interfere with hand movement
  • Features a safety lens that will not shatter
  • Designed using a convex lens to provide wide angle viewing for increased visibility
  • Includes all the necessary hardware and a free hex wrench
  • Limited 1 Year Warranty
Online
$18.21for Each
Mfr PN: 11132
Stock: 548

Black Universal Break-Away Style Truck & Van Mirror Black Universal Break-Away Style Truck & Van Mirror
Online
$16.16for Each
Mfr PN: 41100
Stock: 500
CIPA's Universal Break-Away Style Truck & Van Mirror replaces Ford style and other truck and van mirrors on vehicles with door mount style mirrors. It mounts on the driver or passenger side by simply turning the mirror head around to face the other direction. The mirror head is also fully adjustable during use utilizing a ball and socket attachment. The package includes 1 black 5.5 inch x 8.5 inch mirror head with flat glass, 1 black aluminum assembly bracket, 2 mounting gaskets, 4 self-tapping screws, 4 plastic screw anchors, and installation instructions. This mirror may require drilling four 7/16" holes in the vehicle door. Factory replacement applications can use the existing holes in the vehicle in only some instances where the bracket and bolt holes line up. The mirror assembly bracket contains two mounting brackets. The top bracket is 4.75 inches long with two bolt holes. The bolt holes on the mounting bracket are 3.4375 inches apart from each other. The bottom bracket is 3.4375 inches with two bolts holes. The bolt holes on the bottom mounting bracket are 2.375 inches apart from each other. The two mounting brackets are 4.75 inches apart from top to bottom, and the bolt holes from the top bracket to bottom bracket are 5.4375 inches apart. The Universal Break-Away Style Truck & Van Mirror is also available with a chrome finish (part number 41000).
  • Universal position - Fits driver or passenger side
  • Hardware and instructions included
  • Available in two finishes - black or chrome (# 41000)
  • Fully adjustable large 5.5 inch x 8.5 inch mirror head
  • Driver or passenger side; Manual; Flat glass; Breakaway; Non-heated; Black
  • Limited 1 Year Warranty
Online
$16.16for Each
Mfr PN: 41100
Stock: 500

Blue Tinted 2" Stick-On Convex HotSpot Mirrors Blue Tinted 2" Stick-On Convex HotSpot Mirrors
Online
$1.96for Pair
Retail $1.18
Mfr PN: 49111
Stock: 877
Avoid tricky blind spots when passing or changing lanes with CIPA's round 2" convex blue tinted HotSpot mirrors. Blue tint reduces glare for increased comfort. Easily mounts to original factory mirror featuring convenient stick-on mounting. HotSpot mirrors may be placed anywhere you wish but are typically placed on the bottom outside corner of the original mirror. The desired placement varies from person to person. To find the placement that is right for you, start by placing a piece of folded tape on the back of the HotSpot and sticking it onto your OE mirror where you think you might want it. Then sit in your car and look through the HotSpot. Keep adjusting the placement until it suits your needs. Finally, remove the folded tape, peel the adhesive backing tape off the HotSpot and apply it permanently. Expand your Horizons
  • Reduces blind spots and increases safety when you are passing or changing lanes
  • Blue tint reduces glare for increased comfort
  • Unique and affordable blind spot solution
  • Convenient stick-on application
  • Universal - Fits most vehicles
  • Limited 1 Year Warranty
Online
$1.96for Pair
Retail $1.18
Mfr PN: 49111
Stock: 877

Boating Safety Mirror Boating Safety Mirror
Online
$18.02for Each
Mfr PN: 11140
Stock: 1706
CIPA's Boating Safety Mirror is for water skiing and general boating safety. It features a fully adjustable anti-scratch, quick mount plastic bracket that fits square windshields up to 3/4 of an inch thick. The Boating Safety Mirror is designed to universally mount above or below the windshield frame, offering maximum rear view with a few simple adjustments. The ablity to mount in the down position makes this mirror perfect for boats with walk-thru windshields. The mirror head on the Boating Safety Mirror measures 4.25 x 8 inches and features a convex acrylic safety lens for wide angle viewing and added safety. Each package includes two different anti-scratch mounting plates. One for standard thickness windshield frames (5/8-inch to 3/4-inch), and the other for frames thinner than 5/8-inches. Mirrors are made with non-corrosive materials and are salt spray tested.
  • Features a fully adjustable anti-scratch, quick mount plastic bracket that fits square windshields up to 3/4 of an inch thick
  • Can mount above or below the windshield - Perfect for walk-thru windshields
  • Features a convex acrylic safety lens for wide angle viewing and added safety
  • Mirror head measures 4.25 x 8 inches
  • Made with non-corrosive materials and salt spray tested
  • Limited 1 Year Warranty
Online
$18.02for Each
Mfr PN: 11140
Stock: 1706

CIPA 10801GL Driver Side Replacement Glass for CIPA Custom Towing Mirrors CIPA 10801GL Driver Side Replacement Glass for CIPA Custom Towing Mirrors
Online
$7.71for Each
Mfr PN: 10801GL
Stock: 46
CIPA Custom Towing Mirror Replacement Glass for replacement of cracked or broken glass on your driver side CIPA Custom Towing Mirror. Glass kit includes 1 driver side (left hand) piece of glass and 2 strips of double sided glass adhesive tape. This part replaces the glass on CIPA Custom Towing Mirrors part numbers 10801, 10901, and 11301. Not sure which CIPA Custom Towing Mirror you have? This will replace the glass on the driver side of CIPA Custom Towing mirrors that fit the following vehicles: 1999-2011 Chevy Silverado, 1999-2011 GMC Sierra, 2000-2011 Chevy Tahoe, 2000-2011 Chevy Suburban, 2000-2011 Chevy Avalanche, 2000-2011 GMC Denali, 2000-2011 GMC Yukon, 2000-2011 GMC Yukon XL, 2000-2011 Cadillac Escalade, 2007-2011 Toyota Tundra, and the 2007-2011 Toyota Sequoia.
  • Includes double sided glass adhesive tape
  • Exact replacement of glass included in CIPA's Custom Towing Mirror kits
  • Much more economical than having to replace the entire towing mirror
  • Ensures a lifetime of satisfaction with CIPA's Custom Towing Mirror Line
  • Provides years of extended visibility and reliability
  • Limited 1 Year Warranty
Online
$7.71for Each
Mfr PN: 10801GL
Stock: 46

CIPA 10802GL Passenger Side Replacement Glass for CIPA Custom Towing Mirrors CIPA 10802GL Passenger Side Replacement Glass for CIPA Custom Towing Mirrors
Online
$7.71for Each
Mfr PN: 10802GL
Stock: 48
CIPA Custom Towing Mirror Replacement Glass for replacement of cracked or broken glass on your passenger side CIPA Custom Towing Mirror. Glass kit includes 1 passenger side (right hand) piece of glass and 2 strips of double sided glass adhesive tape. This part replaces the glass on CIPA Custom Towing Mirrors part numbers 10802, 10902, and 11302. Not sure which CIPA Custom Towing Mirror you have? This will replace the glass on the passenger side of CIPA Custom Towing mirrors that fit the following vehicles: 1999-2011 Chevy Silverado, 1999-2011 GMC Sierra, 2000-2011 Chevy Tahoe, 2000-2011 Chevy Suburban, 2000-2011 Chevy Avalanche, 2000-2011 GMC Denali, 2000-2011 GMC Yukon, 2000-2011 GMC Yukon XL, 2000-2011 Cadillac Escalade, 2007-2011 Toyota Tundra, and the 2007-2011 Toyota Sequoia.
  • Includes double sided glass adhesive tape
  • Exact replacement of glass included in CIPA's Custom Towing Mirror kits
  • Much more economical than having to replace the entire towing mirror
  • Ensures a lifetime of satisfaction with CIPA's Custom Towing Mirror Line
  • Provides years of extended visibility and reliability
  • Limited 1 Year Warranty
Online
$7.71for Each
Mfr PN: 10802GL
Stock: 48

CIPA 36500WIRE Wire Harness for Wedge Base Auto Dimming Mirror with Compass, Temperature, and Map Lights (36500 ) CIPA 36500WIRE Wire Harness for Wedge Base Auto Dimming Mirror with Compass, Temperature, and Map Lights (36500 )
Online
$58.50for Each
Mfr PN: 36500WIRE
Stock: 0
The replacement wire harness for wedge mount Auto Dimming Mirrors with Compass, Temperature, and Map Lights (part number 36500 ) includes 6.5 feet of electrical wire with a 7 hole female connector (for plugging into the mirror), 1 spade terminal (12-volt), 1 ground wire with ring terminal, and 1 inline fuse box with 1 replaceable fuse. Other contents include 1 wire T-tap, 1 temperature sensor probe with 14 feet of wire, 9 black zip ties, and an operation instruction card. Installation may require a clean rag, flashlight, 10 mm socket wrench, 1/8 inch (small) flat screwdriver, wire cutters, multi-meter electrical tester, pliers, and a twenty pound Torx screw driver. Tools not included. Mirror head and bracket not included.
  • Replaceable wires allows you to protect your investment
  • Includes all the same wiring, connectors, and pieces that come with the original mirror kit (excludes mirror head and bracket)
  • Contains 6.5 feet of electrical wiring and a 14 foot temperature wire
  • Plastic and mesh shielding protect the wires from heat and interference while the supplied zip ties hold the wires away from the hot engine and critical parts such as brake systems
  • Works with wedge mount and camlock mount models
  • Limited 1 Year Warranty
Online
$58.50for Each
Mfr PN: 36500WIRE
Stock: 0

CIPA 98-036 Tailgate Cable CIPA 98-036 Tailgate Cable
Online
$7.31for Each
Mfr PN: 98-036
Stock: 166
CIPA's Tailgate Cable kit is a cost effective solution to sagging tailgates. Vinyl-covered heavy-duty steel cable replaces broken original perfectly. Installation is easy and takes about five minutes. The cable is exactly the same as the original (OE number 657700430) in form, fit, and function. Each kit includes 1 cable with crimped ends.
  • A cost effective solution to factory parts
  • Same as the original in form, fit, and function
  • Repairs sagging tailgates
  • Vinyl-covered heavy-duty steel construction
  • Installation is quick and easy
  • Limited 1 Year Warranty
Online
$7.31for Each
Mfr PN: 98-036
Stock: 166

CIPA 98-037 Tailgate Handle CIPA 98-037 Tailgate Handle
Online
$22.46for Each
Mfr PN: 98-037
Stock: 131
CIPA's Tailgate Handle kit is a cost effective solution to replacing worn or broken tailgate handles. Handle restores tailgate function and improves vehicle's look. Installation is easy and takes about five minutes (uses existing original hardware). The handle is similar to the original (OE number 15991785) in form, fit, and function. Each kit includes 1 black textured plastic tailgate handle with a steel base and gaskets.
  • A cost effective solution to factory parts
  • Similar to the original in form, fit, and function
  • Restores proper tailgate function
  • Solid steel construction
  • Installation is quick and easy
  • Limited 1 Year Warranty
Online
$22.46for Each
Mfr PN: 98-037
Stock: 131

CJ-Style Driver Side Jeep Replacement Mirror Manual Non-foldaway Non-Heated Black CJ-Style Driver Side Jeep Replacement Mirror Manual Non-foldaway Non-Heated Black
Online
$12.45for Each
Mfr PN: 44700
Stock: 13
When nice weather strikes, the primary thing most jeep owners want to do is take off the top and doors on their Jeeps. Most Wrangler owner's cannot take the doors off their Jeep's and remain street legal. Many areas require an outside mirror on the driver's side of the Jeep, and the Wrangler mirrors are attached to the doors. One solution is to install CJ-Style mirrors on your Wrangler. CIPA's CJ-Style Replacement Mirrors attach to the windshield permanently, enabling you to take the factory mirrors off your doors. With CJ-Style Replacement Mirrors you can just pull off your doors and go! Mirrors mount to the outside edge of the upper windshield hinge using existing holes so drilling is not required. The placement of these mirrors are great for half doors, soft doors, or no doors. They also continue to be functional with full doors in place - even on the passenger side. The passenger side mirror was designed to be viewed through the windshield, and not through the passenger door window. It is placed at the same angle as the driver's side, but the arm is positioned in more of a forward direction so it can be seen from the driver's seat. The brackets on the CIPA's passenger side mirrors are bent to accommodate the view of the passenger mirror from the driver's seat. Don't waste time installing hinge mirrors. Get your mirrors back without relocating your stock mirrors with CIPA's CJ-Style Replacement Mirrors. This mirror is for the driver's side and has a black satin finish; the glass is manual adjusting and flat (non-magnified). The mirror is non-foldaway and non-heated. Each kit includes 1 mirror with attached bracket, 2 bolts, and 2 washers.
  • Allows you to just pull off your doors and go while remaining street legal
  • Mirrors mount to the outside edge of the upper windshield hinge using existing holes so drilling is not required
  • Great for half doors, soft doors, or no doors. Continues to be functional even with full doors in place
  • Enables you to get your mirrors back without relocating your stock mirrors
  • Driver side; Manual; Flat glass; Non-foldaway, Non-heated; Black
  • Limited 1 Year Warranty
Online
$12.45for Each
Mfr PN: 44700
Stock: 13

CJ-Style Driver Side Jeep Replacement Mirror Manual Non-foldaway Non-Heated Black CJ-Style Driver Side Jeep Replacement Mirror Manual Non-foldaway Non-Heated Black
Online
$12.45for Each
Mfr PN: 44800
Stock: 151
When nice weather strikes, the primary thing most jeep owners want to do is take off the top and doors on their Jeeps. Most Wrangler owner's cannot take the doors off their Jeep's and remain street legal. Many areas require an outside mirror on the driver's side of the Jeep, and the Wrangler mirrors are attached to the doors. One solution is to install CJ-Style mirrors on your Wrangler. CIPA's CJ-Style Replacement Mirrors attach to the windshield permanently, enabling you to take the factory mirrors off your doors. With CJ-Style Replacement Mirrors you can just pull off your doors and go! Mirrors mount to the outside edge of the upper windshield hinge using existing holes so drilling is not required. The placement of these mirrors are great for half doors, soft doors, or no doors. They also continue to be functional with full doors in place - even on the passenger side. The passenger side mirror was designed to be viewed through the windshield, and not through the passenger door window. It is placed at the same angle as the driver's side, but the arm is positioned in more of a forward direction so it can be seen from the driver's seat. The brackets on the CIPA's passenger side mirrors are bent to accommodate the view of the passenger mirror from the driver's seat. Don't waste time installing hinge mirrors. Get your mirrors back without relocating your stock mirrors with CIPA's CJ-Style Replacement Mirrors. This mirror is for the driver's side and has a black satin finish; the glass is manual adjusting and flat (non-magnified). The mirror is non-foldaway and non-heated. Each kit includes 1 mirror with attached bracket, 2 bolts, and 2 washers.
  • Allows you to just pull off your doors and go while remaining street legal
  • Mirrors mount to the outside edge of the upper windshield hinge using existing holes so drilling is not required
  • Great for half doors, soft doors, or no doors. Continues to be functional even with full doors in place
  • Enables you to get your mirrors back without relocating your stock mirrors
  • Driver side; Manual; Flat glass; Non-foldaway, Non-heated; Black
  • Limited 1 Year Warranty
Online
$12.45for Each
Mfr PN: 44800
Stock: 151

CJ-Style Passenger Side Jeep Replacement Mirror Manual Non-foldaway Non-Heated Black CJ-Style Passenger Side Jeep Replacement Mirror Manual Non-foldaway Non-Heated Black
Online
$12.45for Each
Mfr PN: 44801
Stock: 90
When nice weather strikes, the primary thing most jeep owners want to do is take off the top and doors on their Jeeps. Most Wrangler owner's cannot take the doors off their Jeep's and remain street legal. Many areas require an outside mirror on the driver's side of the Jeep, and the Wrangler mirrors are attached to the doors. One solution is to install CJ-Style mirrors on your Wrangler. CIPA's CJ-Style Replacement Mirrors attach to the windshield permanently, enabling you to take the factory mirrors off your doors. With CJ-Style Replacement Mirrors you can just pull off your doors and go! Mirrors mount to the outside edge of the upper windshield hinge using existing holes so drilling is not required. The placement of these mirrors are great for half doors, soft doors, or no doors. They also continue to be functional with full doors in place - even on the passenger side. The passenger side mirror was designed to be viewed through the windshield, and not through the passenger door window. It is placed at the same angle as the driver's side, but the arm is positioned in more of a forward direction so it can be seen from the driver's seat. The brackets on the CIPA's passenger side mirrors are bent to accommodate the view of the passenger mirror from the driver's seat. Don't waste time installing hinge mirrors. Get your mirrors back without relocating your stock mirrors with CIPA's CJ-Style Replacement Mirrors. This mirror is for the passenger side and has a black satin finish; the glass is manual adjusting and flat (non-magnified). The mirror is non-foldaway and non-heated. Each kit includes 1 mirror with attached bracket, 2 bolts, and 2 washers.
  • Allows you to just pull off your doors and go while remaining street legal
  • Mirrors mount to the outside edge of the upper windshield hinge using existing holes so drilling is not required
  • Great for half doors, soft doors, or no doors. Continues to be functional even with full doors in place
  • Enables you to get your mirrors back without relocating your stock mirrors
  • Passenger side; Manual; Flat glass; Non-foldaway, Non-heated; Black
  • Limited 1 Year Warranty
Online
$12.45for Each
Mfr PN: 44801
Stock: 90

CJ-Style Passenger Side Jeep Replacement Mirror Manual Non-foldaway Non-Heated Black CJ-Style Passenger Side Jeep Replacement Mirror Manual Non-foldaway Non-Heated Black
Online
$12.45for Each
Mfr PN: 44701
Stock: 82
When nice weather strikes, the primary thing most jeep owners want to do is take off the top and doors on their Jeeps. Most Wrangler owner's cannot take the doors off their Jeep's and remain street legal. Many areas require an outside mirror on the driver's side of the Jeep, and the Wrangler mirrors are attached to the doors. One solution is to install CJ-Style mirrors on your Wrangler. CIPA's CJ-Style Replacement Mirrors attach to the windshield permanently, enabling you to take the factory mirrors off your doors. With CJ-Style Replacement Mirrors you can just pull off your doors and go! Mirrors mount to the outside edge of the upper windshield hinge using existing holes so drilling is not required. The placement of these mirrors are great for half doors, soft doors, or no doors. They also continue to be functional with full doors in place - even on the passenger side. The passenger side mirror was designed to be viewed through the windshield, and not through the passenger door window. It is placed at the same angle as the driver's side, but the arm is positioned in more of a forward direction so it can be seen from the driver's seat. The brackets on the CIPA's passenger side mirrors are bent to accommodate the view of the passenger mirror from the driver's seat. Don't waste time installing hinge mirrors. Get your mirrors back without relocating your stock mirrors with CIPA's CJ-Style Replacement Mirrors. This mirror is for the passenger side and has a black satin finish; the glass is manual adjusting and flat (non-magnified). The mirror is non-foldaway and non-heated. Each kit includes 1 mirror with attached bracket, 2 bolts, and 2 washers.
  • Allows you to just pull off your doors and go while remaining street legal
  • Mirrors mount to the outside edge of the upper windshield hinge using existing holes so drilling is not required
  • Great for half doors, soft doors, or no doors. Continues to be functional even with full doors in place
  • Enables you to get your mirrors back without relocating your stock mirrors
  • Passenger side; Manual; Flat glass; Non-foldaway, Non-heated; Black
  • Limited 1 Year Warranty
Online
$12.45for Each
Mfr PN: 44701
Stock: 82

Clip-On Towing Mirror Clip-On Towing Mirror
Online
$10.97for Each
Mfr PN: 11950
Stock: 3769
CIPA's Clip-On Towing Mirror was designed to fit large factory truck and van mirrors. Rubber straps secure the Clip-On Towing Mirror to your vehicle's existing mirror, and easy-to-adjust arms fit tightly for a steady vibration-free ride. The Clip-On Towing Mirror extends your vision further than any OE mirror ever could with a total extension of 7 inches. This mirror will not obstruct your vehicle's existing viewing area. The Clip-On Towing Mirror has a 5" by 7.5" mirror face that widens visibility, in addition to your factory mirror, for peace of mind while towing. The Clip-On Towing Mirror is not position specific, so it can accommodate the driver side or the passenger side of your vehicle. It will fit up to a 10" mirror. Installation is simple and no tools are required. The Clip-On Towing Mirror is perfect for temporary or light towing needs. It is not recommended to be used as a full time heavy-duty towing solution. For best results, remove the towing mirror when not in use, and store in a cool dry place. Mirrors come 1 per package. Expand your Horizons
  • Universal in application and position
  • Clips directly onto existing mirrors for quick setup with no tools required
  • Extends your towing vision up to 7"
  • Adjustable arms fit tight on any mirror for a steady vibration-free ride
  • A good economic alternative to expensive towing solutions
  • Limited 1 Year Warranty
Online
$10.97for Each
Mfr PN: 11950
Stock: 3769

COMP II 4" x 11" Marine Mirror (White) COMP II 4" x 11" Marine Mirror (White)
Online
$37.10for Each
Mfr PN: 11081
Stock: 382
CIPA's COMP II Marine Mirror features a 4 x 11 inch OE grade shatterproof convex safety glass mirror surface to provide added safety and situational awareness. In order for glass to be considered of OE grade it must utilize a technique called first surface coating. First surface coating provides a high quality image that eliminates symptoms such as ghosting and multiple reflections. The convex design of the glass provides for a wider viewing angle. The COMP II Marine Mirror is universal in application and fit, and can be mounted above or below the windshield. Ball and socket tension adjustment knob design keeps the mirror where it's positioned. The aluminum anti-scratch quick-mount bracket accommodates round or square windshield frames from 1/2 to 7/8 of an inch. Made with non-corrosive materials and salt spray tested. Easy to install. All hardware included.
  • Features a 4 x 11 inch OE grade shatterproof convex safety glass mirror surface to provide added safety and situational awareness
  • Universal in application and fit, and mounted above or below the windshield. Ball and socket tension adjustment knob design keeps the mirror where it's positioned
  • Convex glass design provides for a wider viewing angle
  • Aluminum anti-scratch quick-mount bracket accommodates round or square windshield frames from 1/2 to 7/8 of an inch
  • Made with non-corrosive materials and salt spray tested. Easy to install. All hardware included
  • Limited 1 Year Warranty
Online
$37.10for Each
Mfr PN: 11081
Stock: 382

COMP Marine 7" x 14" Mirror with Round Bracket COMP Marine 7" x 14" Mirror with Round Bracket
Online
$80.04for Each
Retail $92.35
Mfr PN: 01874
Stock: 55
CIPA's COMP Marine Mirror offers approximately 98 square inches of rear view vision for the ultimate in boating safety. This exceeds Alabama's 78 square inch law by 20 square inches offering a wide angle view. The COMP Marine Mirror is perfect for competitive water sports and is considered a tournament standard in safety. The mirror head features OE grade shatterproof convex safety glass, and meets QS9000 and ISO 9002 standards. In order for glass to be considered of OE grade it must utilize a technique called first surface coating. First surface coating provides a high quality image that eliminates symptoms such as ghosting and multiple reflections. The result is a crisp clear view. The COMP Marine Mirror can be mounted to round windshield frames from 0.375 to 1 inch in diameter. Once mounted, it will sIt approximately 3 inches above the windshield. The attached mounting bracket is made from aluminum and has a black textured finish. It attaches to the windshield using a quick and easy clamp-on design. This mirror is also available for boats with square windshield frames that are 0.375 to 1 inch thick part number 01875 (M1B875). Package includes 1 COMP Marine Mirror 7" x 14" head, 1 black powder coated aluminum round bracket assembly, 1 main adjustment knob, 2 small adjustment knobs, 1 mirror attachment clip, 2 neoprene strips and 1 spacer plate with neoprene strip.
  • Offers approximately 98 square inches of rear view vision for the ultimate in boating safety exceeding the Alabama 78 square inch law by 20 square inches and offering a wide angle view
  • Perfect for competitive water sports and is considered a tournament standard in safety
  • Features OE grade shatterproof convex safety glass, and meets QS9000 and ISO 9002 standards
  • Mounts to round windshield frames from 0.375 to 1 inch in diameter and sits approximately 3 inches above the windshield. Attaches using a quick and easy clamp-on design
  • Package includes 1 COMP Marine Mirror 7" x 14" head, 1 black powder coated aluminum round bracket assembly, 1 main adjustment knob, 2 small adjustment knobs, 1 mirror attachment clip, 2 neoprene strips and 1 spacer plate with neoprene strip.
  • Limited 1 Year Warranty
Online
$80.04for Each
Retail $92.35
Mfr PN: 01874
Stock: 55

COMP Marine 7" x 14" Mirror with Square Bracket COMP Marine 7" x 14" Mirror with Square Bracket
Online
$80.04for Each
Retail $92.35
Mfr PN: 01875
Stock: 66
CIPA's COMP Marine Mirror offers approximately 98 square inches of rear view vision for the ultimate in boating safety. This exceeds Alabama's 78 square inch law by 20 square inches offering a wide angle view. The COMP Marine Mirror is perfect for competitive water sports and is considered a tournament standard in safety. The mirror head features OE grade shatterproof convex safety glass, and meets QS9000 and ISO 9002 standards. In order for glass to be considered of OE grade it must utilize a technique called first surface coating. First surface coating provides a high quality image that eliminates symptoms such as ghosting and multiple reflections. The result is a crisp clear view. The COMP Marine Mirror can be mounted to square windshield frames from 0.375 to 1 inch thick. Once mounted, it will sit approximately 3 inches above the windshield. The attached mounting bracket is made from aluminum and has a black textured finish. It attaches to the windshield using a quick and easy clamp-on design. This mirror is also available for boats with round windshield frames that are 0.375 to 1 inch in diameter part number 01874 (M1B874). Package includes 1 COMP Marine Mirror 7" x 14" head, 1 black powder coated aluminum square bracket assembly, 1 main adjustment knob, 2 small adjustment knobs, 1 mirror attachment clip, 2 neoprene strips and 1 spacer plate with neoprene strip.
  • Offers approximately 98 square inches of rear view vision for the ultimate in boating safety exceeding the Alabama 78 square inch law by 20 square inches and offering a wide angle view
  • Perfect for competitive water sports and is considered a tournament standard in safety
  • Features OE grade shatterproof convex safety glass, and meets QS9000 and ISO 9002 standards
  • Mounts to square windshield frames from 0.375 to 1 inch thick and sits approximately 3 inches above the windshield. Attaches using a quick and easy clamp-on design
  • Package includes 1 COMP Marine Mirror 7" x 14" head, 1 black powder coated aluminum square bracket assembly, 1 main adjustment knob, 2 small adjustment knobs, 1 mirror attachment clip, 2 neoprene strips and 1 spacer plate with neoprene strip.
  • Limited 1 Year Warranty
Online
$80.04for Each
Retail $92.35
Mfr PN: 01875
Stock: 66

COMP Marine 7x14 Mirror Head COMP Marine 7x14 Mirror Head
Online
$30.34for Each
Retail $35.02
Mfr PN: 01300
Stock: 1075
CIPA's COMP Marine Mirror Head offers approximately 98 square inches (7 x 14) of rear view vision for the ultimate in boating safety. This exceeds Alabama's 78 square inch law by 20 square inches offering a wide angle view. The mirror head features OE grade shatterproof convex safety glass, and meets QS9000 and ISO 9002 standards. Dashboard and windshield brackets are available separately (part numbers 02621, 01873, and 01876), or as a complete mirror kit (part numbers 02721, 01874 and 01875). Package includes 1 COMP Marine Mirror Head with attached glass and gasket, and 1 COMP Marine Mirror attachment clip (for attaching to a bracket). Mounting bracket not included.
  • Offers approximately 98 square inches of rear view vision for the ultimate in boating safety exceeding the 78 square inch law of Alabama
  • Head features OE grade shatterproof convex safety glass, and meets QS9000 and ISO 9002 standards
  • Features an attachment clip to offer versatility when using third-party or custom brackets
  • Dashboard and windshield brackets are available separately (part numbers 02621, 01873, and 01876), or as a complete mirror kit (part numbers 02721, 01874 and 01875)
  • Package includes 1 COMP Marine Mirror Head with attached glass and gasket, and 1 Comp Marine Mirror attachment clip (for attaching to a bracket). Mounting bracket not included
  • Limited 1 Year Warranty
Online
$30.34for Each
Retail $35.02
Mfr PN: 01300
Stock: 1075

COMP Marine Mirror 7x14 Replacement Glass COMP Marine Mirror 7x14 Replacement Glass
Online
$13.86for Each
Retail $16.00
Mfr PN: 01361
Stock: 150
CIPA's COMP Marine Mirror Replacement Glass offers approximately 98 square inches (7 x 14) of rear view vision for the ultimate in boating safety. This exceeds Alabama's 78 square inch law by 20 square inches offering a wide angle view. The glass is made from OE grade convex shatterproof safety glass. This part replaces chipped or broken glass in CIPA's COMP Marine Mirror line part numbers 01300 (M1C), 02721 (M1B721), 01874 (M1B874), and 01875 (M1B875). Package includes 1 COMP Marine Mirror Replacement Glass, (actual glass size is 13 3/8 X 6 3/8) 1 foam double side adhesive strip and 1 mirror housing gasket. Mounting bracket not included.
  • Package includes 1 COMP Marine Mirror Replacement Glass, and 1 foam double side adhesive strip
  • Much more economical than having to replacing the entire mirror
  • Feaures a convex design with a large 7 x 14 inch glass surface for wide angle viewing
  • Replaces chipped or broken glass for CIPA part numbers 01300 (M1C), 02721 (M1B721), 01874 (M1B874), and 01875 (M1B875)
  • Exact replacement of the OE grade convex shatterproof safety glass that comes with CIPAs COMP Marine Mirror
  • Limited 1 Year Warranty
Online
$13.86for Each
Retail $16.00
Mfr PN: 01361
Stock: 150

COMP Universal 7" x 14" Marine Mirror COMP Universal 7" x 14" Marine Mirror
Online
$43.61for Each
Retail $50.32
Mfr PN: 02000
Stock: 2744
CIPA's COMP Universal Marine Mirror was designed with competition water skiing in mind. With a 7 x 14 inch convex mirror face, the captain is sure to see the skier perform all of the tricks, and of course, all of the wipe outs too. The COMP Universal Marine Mirror features a ball and socket tension adjustment knob to keep the mirror where it's positioned. The universal bracket will mount to rectangular or rounded windshield frames from 0.375 to 1.25 inches thick. When it comes to water sports, being safe is just as important as having fun.
  • 7 x 14 inch mirror head
  • Meets the Alabama 78 sq. inch law
  • Universal mount for round or square windshields
  • Ball and socket tension adjustment knob keeps it where you position it
  • Fits windshield frames from 0.375 to 1.25 inches thick
  • Limited 1 Year Warranty
Online
$43.61for Each
Retail $50.32
Mfr PN: 02000
Stock: 2744

COMP Universal 7" x 14" Marine Mirror Head COMP Universal 7" x 14" Marine Mirror Head
Online
$34.44for Each
Retail $39.74
Mfr PN: 02102
Stock: 255
CIPA's COMP Universal Marine Mirror Head is a 7 x 14 inch universal marine mirror head made with shatterproof safety glass. It features a convex lens to provide a wide angle view. It meets and exceeds the Alabama 78 square inch law. Package includes 1 mirror head with glass, 1 mounting stud, and 1 adjustment knob. Mounting bracket not included.
  • 7 x 14 inch universal marine mirror head
  • Meets and exceeds the Alabama 78 square inch law
  • Features a convex lens to provide a wide angle view
  • Made with shatterproof safety glass
  • Package includes 1 mirror head with glass, 1 mounting stud, and 1 adjustment knob
  • Limited 1 Year Warranty
Online
$34.44for Each
Retail $39.74
Mfr PN: 02102
Stock: 255

Concept II 4" x 8" Marine Mirror (White) Concept II 4" x 8" Marine Mirror (White)
Online
$32.89for Each
Mfr PN: 11071
Stock: 186
CIPA's Concept II Marine Mirror features a 4 x 8 inch OE grade shatterproof convex safety glass mirror surface to provide added safety and situational awareness. In order for glass to be considered of OE grade it must utilize a technique called first surface coating. First surface coating provides a high quality image that eliminates symptoms such as ghosting and multiple reflections. The convex design of the glass provides for a wider viewing angle. The Concept II Marine Mirror is universal in application and fit, and can be mounted above or below the windshield. Ball and socket tension adjustment knob design keeps the mirror where it's positioned. The aluminum anti-scratch quick-mount bracket accommodates round or square windshield frames from 1/2 to 7/8 of an inch. Made with non-corrosive materials and salt spray tested. Easy to install. All hardware included.
  • Features a 4 x 8 inch OE grade shatterproof convex safety glass mirror surface to provide added safety and situational awareness
  • Universal in application and fit, and mounted above or below the windshield. Ball and socket tension adjustment knob design keeps the mirror where it's positioned
  • Convex glass design provides for a wider viewing angle
  • Aluminum anti-scratch quick-mount bracket accommodates round or square windshield frames from 1/2 to 7/8 of an inch
  • Made with non-corrosive materials and salt spray tested. Easy to install. All hardware included
  • Limited 1 Year Warranty
Online
$32.89for Each
Mfr PN: 11071
Stock: 186

Corner Wedge 2 Corner Wedge 2
Online
$1.21for Each
Mfr PN: 49404
Stock: 2010
Avoid tricky blind spots when passing or changing lanes with CIPA's 2" x 2" Corner Wedge Convex HotSpot mirror. Unique wedge design adds 30 percent more vision than round convex mirrors. Easily mounts to original factory mirror featuring convenient stick-on mounting. HotSpot mirrors may be placed anywhere you wish but are typically placed on the bottom outside corner of the original mirror. The desired placement varies from person to person. To find the placement that is right for you, start by placing a piece of folded tape on the back of the HotSpot and sticking it onto your OE mirror where you think you might want it. Then sit in your car and look through the HotSpot. Keep adjusting the placement until it suits your needs. Finally, remove the folded tape, peel the adhesive backing tape off the HotSpot and apply it permanently. Expand your Horizons
  • Unique wedge shape helps to prevent blind spots when you are passing or changing lanes
  • 30 Percent more visibility than round convex mirrors
  • Increased safety with wide angle view
  • Versatile design fits most cars and trucks
  • Fits most cars and trucks
  • Limited 1 Year Warranty
Online
$1.21for Each
Mfr PN: 49404
Stock: 2010

Corner Wedge 3" X 3" Stick-On Convex HotSpot Mirror Corner Wedge 3" X 3" Stick-On Convex HotSpot Mirror
Online
$2.01for Each
Mfr PN: 49403
Stock: 17684
Avoid tricky blind spots when passing or changing lanes with CIPA's 3" X 3" wedge convex HotSpot mirror. Easily mounts to original factory mirror featuring convenient stick-on mounting. HotSpot mirrors may be placed anywhere you wish but are typically placed on the bottom outside corner of the original mirror. The desired placement varies from person to person. To find the placement that is right for you, start by placing a piece of folded tape on the back of the HotSpot and sticking it onto your OE mirror where you think you might want it. Then sit in your car and look through the HotSpot. Keep adjusting the placement until it suits your needs. Finally, remove the folded tape, peel the adhesive backing tape off the HotSpot and apply it permanently. Expand your Horizons
  • Unique wedge shape helps to prevent blind spots when you are passing or changing lanes
  • 30 Percent more visibility than round convex mirrors
  • Versatile design fits most cars and trucks
  • Increased safety with wide angle view
  • Fits most cars and trucks
  • Limited 1 Year Warranty
Online
$2.01for Each
Mfr PN: 49403
Stock: 17684

Custom Towing Mirror Dodge Custom Towing Mirror Dodge
Online
$21.37for Each
Mfr PN: 10300
Stock: 46
CIPA's Custom Towing Mirrors were designed to fit over standard factory rearview side mirrors, and are available in over 40 exclusive applications to fit a variety of popular truck and SUV models. The CIPA Custom Towing Mirror is durable, aerodynamic, and sleeve fitted to your vehicles specifications. These mirrors will slide snugly over your vehicles existing rearview side mirror, and features an additional adjustable mirror on the outboard end that extends your towing vision, without obstructing your existing vehicle mirror. No tools are required, and no marks or holes are left on your vehicle. The CIPA Towing Mirrors and installation knobs are made with durable ABS plastic known for its strength, rigidity, and unbreakable security. The mirror face is made with scratch-resistant glass for years of unobstructed towing use. The installation wedges are formed from a polypropylene plastic that has excellent long-term shape conformity, and provides years of installation reliability. CIPA Custom Towing Mirrors can withstand the elements to provide increased all-weather Towing Vision capability. This kit includes 1 universal mirror (driver side or passenger side), 1 installation knob, 1 installation wedge, and illustrated installation instructions. Note: This mirror will fit over both power and manual chrome mirrors for model years 1994-1997, and power chrome mirrors for model years 1996-1997. It will NOT fit Dakotas with black sport-style mirrors. Expand your Horizons
  • Slides over existing mirror with wedge lock security
  • Custom design ensures a perfect fit, and no annoying vibration
  • Easy installation with no tools required
  • Does not obstruct existing mirror
  • Sleek custom design compliments the existing mirror
  • Limited 1 Year Warranty
Online
$21.37for Each
Mfr PN: 10300
Stock: 46

Custom Towing Mirror Dodge/Chevrolet/GMC Custom Towing Mirror Dodge/Chevrolet/GMC
Online
$21.37for Each
Mfr PN: 10000
Stock: 40
CIPA's Custom Towing Mirrors were designed to fit over standard factory rearview side mirrors, and are available in over 40 exclusive applications to fit a variety of popular truck and SUV models. The CIPA Custom Towing Mirror is durable, aerodynamic, and sleeve fitted to your vehicles specifications. These mirrors will slide snugly over your vehicles existing rearview side mirror, and features an additional adjustable mirror on the outboard end that extends your towing vision, without obstructing your existing vehicle mirror. No tools are required, and no marks or holes are left on your vehicle. The CIPA Towing Mirrors and installation knobs are made with durable ABS plastic known for its strength, rigidity, and unbreakable security. The mirror face is made with scratch-resistant glass for years of unobstructed towing use. The installation hooks are formed from a polypropylene plastic that has excellent long-term shape conformity, and provides years of installation reliability. CIPA Custom Towing Mirrors can withstand the elements to provide increased all-weather Towing Vision capability. This kit includes 1 universal mirror (driver side or passenger side), 1 installation knob, 1 installation hook and illustrated installation instructions. Note: Dodge pickups and vans: this mirror fits over both electric and manual chrome mirrors for model years 1986-1993. This mirror fits over manual chrome mirrors only for model years 1994-1995. Note: Chevy/GMC Pickups and Vans: fits manual chrome morrors only; will not fit the chhrome mirrors with black trim. Expand your Horizons
  • Slides over existing mirror with hook and latch lock security
  • Custom design ensures a perfect fit, and no annoying vibration
  • Easy installation with no tools required
  • Does not obstruct existing mirror
  • Sleek custom design compliments the existing mirror
  • Limited 1 Year Warranty
Online
$21.37for Each
Mfr PN: 10000
Stock: 40

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:
SpectrumSuperStore is UpFront

About UsContact UsCustomer Service & PoliciesMerchant ServicePrivacy StatementCustomer FeedbackReturn Policy

Copyright © 1999-2019 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.