1. Home:
  2. showbrand
 

Shop by Brand: USP LUMBER CONNECTORS

Items 1- 32 of 186 total

ANCHOR WET PST TRIPLE ZN 6X6IN ANCHOR WET PST TRIPLE ZN 6X6IN
Online
$17.25for BX
Retail $21.69
Mfr PN: WE66-TZ
Stock: 0
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$17.25for BX
Retail $21.69
Mfr PN: WE66-TZ
Stock: 0

FACE MT HGR 1-3/4X11-1/4IN 18G FACE MT HGR 1-3/4X11-1/4IN 18G
Online
$66.66for 50 EA
Retail $197.50
Mfr PN: IHFL17112/THF1711
Stock: 0
Designed to provide lateral support for the top chords of I-Joists in depths up to 16". G90 galvanizing finish. Meets ICC-ES ESR-1781, FL13285 and L.A. City RR25843 codes. Install 10d x 1-1/2" nails into joist through raised dimple at 45 degree angle. For THF Min, fill all round nail holes. For THF Max, fill all round and diamond holes. For information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the paper catalog R7 Reference Pages. For additional s izing information, visit www.uspconnectors.com. 18 Gauge Joist Size=1-3/4 x 11-1/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$66.66for 50 EA
Retail $197.50
Mfr PN: IHFL17112/THF1711
Stock: 0

HANGER PURLIN SADDLE 2IN X 6IN HANGER PURLIN SADDLE 2IN X 6IN
Online
$3.30for EA
Retail $4.19
Mfr PN: JDS26
Stock: 0
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.30for EA
Retail $4.19
Mfr PN: JDS26
Stock: 0

HANGER RIDGE RAFTER 18 GAUGE HANGER RIDGE RAFTER 18 GAUGE
Online
$58.00for 50 EA
Retail $82.50
Mfr PN: RR
Stock: 0
Supports rafter pitches up to 7:12 (30). Nesting top flange for installation on 2x support beams. Use all specified fasteners. The rafter end at the ridge must be plumb cut to achieve published loads. Optional diamond nail holes can be used to faster RR to end of rafter before settling rafter into place. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$58.00for 50 EA
Retail $82.50
Mfr PN: RR
Stock: 0

HURRICANE ANCHOR TRPL PLT ZINC HURRICANE ANCHOR TRPL PLT ZINC
Online
$84.00for 100 EA
Retail $119.00
Mfr PN: RT15-TZ
Stock: 0
Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc finish requires 8d HDGnails for installation in plate and rafter/truss and Gold Coat anchor requires N8-GC nails. 1-9/16"W x 2-5/8"H opening. Meets ICC-ES ESR-1465, FL817 and Dade County, FL 07-0306.10 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Contractors charts in the paper catalog R7 for reference pages. 18 GAUGE - 5-1/4"H. Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$84.00for 100 EA
Retail $119.00
Mfr PN: RT15-TZ
Stock: 0

KIT DECK TENSION TIE ADJUSTBLE KIT DECK TENSION TIE ADJUSTBLE
Online
$29.44for EA
Retail $36.99
Mfr PN: ADTT-TZKT
Stock: 0
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$29.44for EA
Retail $36.99
Mfr PN: ADTT-TZKT
Stock: 0

LumberLok LL915R50 Structural Screw, NO 9 x 1-3/8 in, Carbon Steel, Gold Coated LumberLok LL915R50 Structural Screw, NO 9 x 1-3/8 in, Carbon Steel, Gold Coated
Online
$7.20for EA
Retail $10.05
Mfr PN: LL915R50
Stock: 0
Gauge x Lgth In=9 x 1-3/8 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$7.20for EA
Retail $10.05
Mfr PN: LL915R50
Stock: 0

LumberLok LL930R50 Structural Screw, NO 9 x 2-7/8 in, Carbon Steel, Gold Coated LumberLok LL930R50 Structural Screw, NO 9 x 2-7/8 in, Carbon Steel, Gold Coated
Online
$9.24for EA
Retail $16.15
Mfr PN: LL930R50
Stock: 0
Gauge x Lgth In=9 x 2-7/8 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$9.24for EA
Retail $16.15
Mfr PN: LL930R50
Stock: 0

Simpson Strong-Tie LSTA Light Duty Strap Tie, 9 in L X 1-1/4 in W, Steel, Hot Dip Galvanized Simpson Strong-Tie LSTA Light Duty Strap Tie, 9 in L X 1-1/4 in W, Steel, Hot Dip Galvanized
Online
$25.33for 50 EA
Retail $48.50
Mfr PN: LSTA9
Stock: 0
20 Gauge Wdth x Lgth In=1-1/4 x 9 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$25.33for 50 EA
Retail $48.50
Mfr PN: LSTA9
Stock: 0

TOP MT JOIST HGR 11-7/8X2.5IN TOP MT JOIST HGR 11-7/8X2.5IN
Online
$94.00for 25 EA
Retail $138.75
Mfr PN: TFL25118
Stock: 0
Features 1-1/2" top flange depth that accommodates all header types as well as back-to-back installations. Features "Seat Cleat" for quick, positive seating. G90 galvanizing finish. Meets ICC-ES ESR-1831 codes. Header requires (6) 10d nails and joist requ ires (2) 10d x 1-1/2 nails for installation. For information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the paper catalog R7 Reference Pages. For additional sizing information, visit www.uspconnect ors.com. 18 Gauge. Joist Size=2-1/2 x 11-7/8 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$94.00for 25 EA
Retail $138.75
Mfr PN: TFL25118
Stock: 0

TRUSS SPACER 1-1/2X25-1/2IN SG TRUSS SPACER 1-1/2X25-1/2IN SG
Online
$115.33for 50 EA
Retail $179.50
Mfr PN: TS
Stock: 0
Fast and accurate spacing guides for trusses, rafters or floor joists. Lightweight and compact, eliminates need to mark layouts on bearing plates, improves installation speed and helps to eliminate spacing errors. Do not rely on the TS for bracing. Requir es (1) 8d nail per end to fasten units to trusses, rafters or floor joists. 2'L overall; 24" O.C. spacing. 20 Gauge - 1 Section/Piece. Size In=1-1/2 x 25-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$115.33for 50 EA
Retail $179.50
Mfr PN: TS
Stock: 0

TZ BEARING PLATE 3X3IN SLOT TZ BEARING PLATE 3X3IN SLOT
Online
$64.00for 50 EA
Retail $112.50
Mfr PN: LBPS12-TZ
Stock: 0
Offers anchor bolt adjustment slots. TRIPLE ZINC 1/2" Bolt Dia. - 10 Ga. WxLxT In=3 x 3 x 9/64 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$64.00for 50 EA
Retail $112.50
Mfr PN: LBPS12-TZ
Stock: 0

TZ FENCE BRACKET 2X4IN 20GA TZ FENCE BRACKET 2X4IN 20GA
Online
$84.00for 100 EA
Retail $115.00
Mfr PN: FB24-TZ
Stock: 0
Provides stronger fence connections and simplifies fence assembly. Can be installed before posts are set to help ensure uniform spacing and alignment. Requires five 6d HDG fasteners for rails and three 8d HDG fasteners for posts. 1-9/16"W X 3-3/8"H - 20 GAUGE - 2 X 4 RAIL SIZE For ACQ Pressure Treated Lumber Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$84.00for 100 EA
Retail $115.00
Mfr PN: FB24-TZ
Stock: 0

TZ POST CAP 6X6IN 1-PIECE STL TZ POST CAP 6X6IN 1-PIECE STL
Online
$161.06for 10 EA
Retail $216.50
Mfr PN: C66-TZ
Stock: 0
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. One piece, designed to work with single, solid sawn beams, but can be used with build-up beams made of 2x lumber and shims fastened together to act as a unit. Requires 16d HDG nails for installation. Meets ICC-ES ESR-1280, FL11664, L.A. City RR25749 and Dade County, FL 07-0306.06 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors cha rts in the paper catalog R7 Reference Pages. 18 GAUGE. Post Size In=6 x 6Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$161.06for 10 EA
Retail $216.50
Mfr PN: C66-TZ
Stock: 0

TZ STRAP TIE 1-1/4X36IN 16GA TZ STRAP TIE 1-1/4X36IN 16GA
Online
$141.33for 50 EA
Retail $197.50
Mfr PN: MSTA36-TZ
Stock: 0
Requires 10d nails for installation. Meets ICC-ES ESR-1781, FL13285 and L.A. City RR25843 codes. TRIPLE ZINC 18 Gauge Wdth x Lgth In=1-1/4 x 36 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$141.33for 50 EA
Retail $197.50
Mfr PN: MSTA36-TZ
Stock: 0

TZ WET ANCH 3-1/2X3-1/4X4-3/4 TZ WET ANCH 3-1/2X3-1/4X4-3/4
Online
$98.88for 12 EA
Retail $145.80
Mfr PN: WE44-TZ
Stock: 0
Secures posts to concrete in light-duty and medium-duty applications such as patio covers, carports or decks. Formed, one-piece design includes embossing for additional lateral strength. Not for fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning (moment) loads. Requires (2) 1/2" HDG bolts or (12) HDG nails for fastening to post. Meets SBCCI, BOCA - NER 530 & NER 608, ICBO 5700, ICBO 2039, ICBO 5531, FL821, FL822, L.A. City RR 25337, and DSA P A-076 codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the paper catalog R7 Reference Pages. TRIPLE ZINC - FOR ACQ PRESSURE TREATED LUMBER 3-1/2"W x 3-1/4"L x 4-3/4"H Post Size In=4 x 4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$98.88for 12 EA
Retail $145.80
Mfr PN: WE44-TZ
Stock: 0

USP Lumber A3 Framing Angle, 2-3/4 in L X 1-7/16 in W X 1-7/16 in D, Steel, Triple Zinc USP Lumber A3 Framing Angle, 2-3/4 in L X 1-7/16 in W X 1-7/16 in D, Steel, Triple Zinc
Online
$61.33for 100 EA
Retail $159.00
Mfr PN: A3-TZ
Stock: 0
Eliminates toenailing and increases strength. Requires 10d x 1-1/2" nails for installation. 1-7/16"W1 X 1-7/16"W2 X 2-3/4"L - 18 GAUGE. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$61.33for 100 EA
Retail $159.00
Mfr PN: A3-TZ
Stock: 0

USP Lumber AC Framing Angle, 6-15/16 in L X 1-5/16 in W X 2-3/8 in D, Steel, Triple Zinc USP Lumber AC Framing Angle, 6-15/16 in L X 1-5/16 in W X 2-3/8 in D, Steel, Triple Zinc
Online
$210.66for 100 EA
Retail $375.00
Mfr PN: AC7-TZ
Stock: 0
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported me mber. Triple Zinc clips require 10d HDG or 16d HDG nails. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the pa per catalog R7 Reference Pages. 1-5/16"W1 x 2-3/8"W2 x 6-15/16"L - 16 GAUGE Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$210.66for 100 EA
Retail $375.00
Mfr PN: AC7-TZ
Stock: 0

USP Lumber AC5-TZ Framing Angle, 1-5/16 in, 155 lb Douglas Fir, 16 ga Steel, Triple Zinc Plated USP Lumber AC5-TZ Framing Angle, 1-5/16 in, 155 lb Douglas Fir, 16 ga Steel, Triple Zinc Plated
Online
$160.00for 100 EA
Retail $279.00
Mfr PN: AC5-TZ
Stock: 0
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported me mber. Triple Zinc clips require 10d HDG or 16d HDG nails. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the pa per catalog R7 Reference Pages. 1-5/16"W1 x 2-3/8"W2 x 4-7/8"L - 16 GAUGE Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$160.00for 100 EA
Retail $279.00
Mfr PN: AC5-TZ
Stock: 0

USP Lumber AC7 Framing Angle, 1-5/16 in, 210 lb Douglas Fir, 16 ga Steel, Galvanized USP Lumber AC7 Framing Angle, 1-5/16 in, 210 lb Douglas Fir, 16 ga Steel, Galvanized
Online
$174.66for 100 EA
Retail $305.00
Mfr PN: AC7
Stock: 0
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported me mber. Triple Zinc clips require 10d HDG or 16d HDG nails. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the pa per catalog R7 Reference Pages. 1-5/16"W1 x 2-3/8"W2 x 6-15/16"L - 16 GAUGE Finish=G90 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$174.66for 100 EA
Retail $305.00
Mfr PN: AC7
Stock: 0

USP Lumber AC9-TZ Framing Angle, 1-5/16 in, 260 lb Douglas Fir, 16 ga Steel, Triple Zinc Plated USP Lumber AC9-TZ Framing Angle, 1-5/16 in, 260 lb Douglas Fir, 16 ga Steel, Triple Zinc Plated
Online
$150.00for 50 EA
Retail $262.50
Mfr PN: AC9-TZ
Stock: 0
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported me mber. Triple Zinc clips require 10d HDG or 16d HDG nails. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the pa per catalog R7 Reference Pages. 1-5/16"W1 x 2-3/8"W2 x 8-7/8"L - 16 GAUGE Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$150.00for 50 EA
Retail $262.50
Mfr PN: AC9-TZ
Stock: 0

USP Lumber B Multi-Purpose Reinforcement Corner Brace, 6 in L x 1-1/2 in W, Galvanized USP Lumber B Multi-Purpose Reinforcement Corner Brace, 6 in L x 1-1/2 in W, Galvanized
Online
$3.35for EA
Retail $5.55
Mfr PN: B66
Stock: 0
These multi-purpose braces are designed to provide reinforcement for 90 degree wood-to-wood connections. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasten ers; please see USP Lumber Connectors charts in the paper catalog R7 Reference Pages. G90 GALVANIZING 12 GAUGE Wdth x Lgth In=1-1/2 x 6 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.35for EA
Retail $5.55
Mfr PN: B66
Stock: 0

USP Lumber BL Multi-Purpose Corner Brace, 3-1/16 in L X 1-1/4 in W, Steel, Galvanized USP Lumber BL Multi-Purpose Corner Brace, 3-1/16 in L X 1-1/4 in W, Steel, Galvanized
Online
$42.66for 25 EA
Retail $74.75
Mfr PN: BL3
Stock: 0
Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge. Wdth x Lgth In=1-1/4 x 3-1/16 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$42.66for 25 EA
Retail $74.75
Mfr PN: BL3
Stock: 0

USP Lumber BL Multi-Purpose Corner Brace, 4-13/16 in L X 1-1/4 in W, Steel, Galvanized USP Lumber BL Multi-Purpose Corner Brace, 4-13/16 in L X 1-1/4 in W, Steel, Galvanized
Online
$112.33for 25 EA
Retail $163.75
Mfr PN: BL6
Stock: 0
Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge. Wdth x Lgth In=1-1/4 x 6-9/16 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$112.33for 25 EA
Retail $163.75
Mfr PN: BL6
Stock: 0

USP Lumber BL Multi-Purpose Reinforcement Corner Brace, 4-13/16 in L x 1-1/4 in W, Galvanized USP Lumber BL Multi-Purpose Reinforcement Corner Brace, 4-13/16 in L x 1-1/4 in W, Galvanized
Online
$59.00for 25 EA
Retail $118.75
Mfr PN: BL4
Stock: 0
Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge. Wdth x Lgth In=1-1/4 x 4-13/16 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$59.00for 25 EA
Retail $118.75
Mfr PN: BL4
Stock: 0

USP Lumber BP583 Standard Bearing Plate, 3 in L x 3 in W x 1/4 in T, Steel, G60 Galvanized USP Lumber BP583 Standard Bearing Plate, 3 in L x 3 in W x 1/4 in T, Steel, G60 Galvanized
Online
$82.00for 50 EA
Retail $142.50
Mfr PN: BP583
Stock: 0
Designed to meet code requirements for mudsill-to-foundation and stud-to-foundation connections. 5/8" Bolt Dia. WxLxT In=3 x 3 x 1/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$82.00for 50 EA
Retail $142.50
Mfr PN: BP583
Stock: 0

USP Lumber CBE Column Base, 4 X 4 in Post, 2 in L x 3-9/16 in W, 5/8 in Bolt USP Lumber CBE Column Base, 4 X 4 in Post, 2 in L x 3-9/16 in W, 5/8 in Bolt
Online
$152.80for 12 EA
Retail $166.20
Mfr PN: CBE44
Stock: 0
Use for carports, patios, other residential framing. Requires a medium side cover of 3". Embedment 7" with 7-1/2" vertical height from baseplate. Baseplate 3-9/16"W. G90 galvanizing finish. Not recommended for fence posts or unrestrained (not fixed or fas tened at top) applications. Not designed to resist over turning (moment loads). Requires either (2) 1/2" HDG bolts or (12) 16d HDG nails for installation. Nail and bolt load values cannot be combined. Meets SBCCI, BOCA - NER 530, ICBO 5700, FL822 L.A. Ci ty RR25337 and DSA PA-076 codes. 12 Gauge. Column In=4 x 4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$152.80for 12 EA
Retail $166.20
Mfr PN: CBE44
Stock: 0

USP Lumber CMST14 Coiled Strap, 3 in, 6630 lb, 14 ga Steel, Galvanized USP Lumber CMST14 Coiled Strap, 3 in, 6630 lb, 14 ga Steel, Galvanized
Online
$145.22for EA
Mfr PN: CMST14
Stock: 0
Enables cut-to-length convenience for a variety of immediate job site needs. Features diamond nail holes to provide nailing options and reduce wood splitting. Heavy 14 gauge steel construction useful in seismic and high wind zones. G90 galvanizing finish. Requires 10d and 16d nails for installation. Meets ICC-ES ESR-1881, FL821 and L.A. City RR25779 codes. 14 Gauge - 52-1/2' Coil. Wdth In=3 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$145.22for EA
Mfr PN: CMST14
Stock: 0

USP Lumber CPB Composite Post Base, 4 X 4 in Post, 3-1/4 in L x 3-1/4 in W x 1 in H Base USP Lumber CPB Composite Post Base, 4 X 4 in Post, 3-1/4 in L x 3-1/4 in W x 1 in H Base
Online
$84.33for 25 EA
Retail $117.25
Mfr PN: CPB44
Stock: 0
Provides a raised base that elevates wood posts above concrete surfaces to avoid moisture from ground contact. Single-piece design made from composite material; will not corrode. Open center enables installation of metal rod from concrete into post. Not f or fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning moment loads. Requires (4) 10d HDG nails. ACQ approved. Post Size In=4 x 4Wdth In=3-1/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$84.33for 25 EA
Retail $117.25
Mfr PN: CPB44
Stock: 0

USP Lumber CPB Composite Post Base, 6 X 6 in Post, 5-5/16 in L x 5-5/16 in W x 1 in H Base USP Lumber CPB Composite Post Base, 6 X 6 in Post, 5-5/16 in L x 5-5/16 in W x 1 in H Base
Online
$158.00for 25 EA
Retail $221.25
Mfr PN: CPB66
Stock: 0
Post Size In=6 x 6Wdth In=5-5/16 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$158.00for 25 EA
Retail $221.25
Mfr PN: CPB66
Stock: 0

USP Lumber CPB Composite Post Base, 8 X 8 in Post, 7-1/4 in L x 7-1/4 in W x 1 in H Base USP Lumber CPB Composite Post Base, 8 X 8 in Post, 7-1/4 in L x 7-1/4 in W x 1 in H Base
Online
$58.88for 6 EA
Retail $83.10
Mfr PN: CPB88
Stock: 0
Provides a raised base that elevates wood posts above concrete surfaces to avoid moisture from ground contact. Single-piece design made from composite material; will not corrode. Open center enables installation of metal rod from concrete into post. Not f or fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning moment loads. Requires (4) 10d HDG nails. ACQ approved. Post Size In=8 x 8Wdth In=7-1/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$58.88for 6 EA
Retail $83.10
Mfr PN: CPB88
Stock: 0

USP Lumber CSH-TZ Concealed Stringer Hanger, 1-7/16 in, 390 lb Uplift Douglas Fir, 18 ga Steel USP Lumber CSH-TZ Concealed Stringer Hanger, 1-7/16 in, 390 lb Uplift Douglas Fir, 18 ga Steel
Online
$80.66for 50 EA
Retail $142.50
Mfr PN: CSH-TZ
Stock: 0
Concealed stair stringer hanger provides a method of connecting a stringer with a hidden hanger. The seat of the hanger is adjustable to match the slope of the stair stringer. Triple Zinc finish. Requires (8) 10d x 1-1/2 HDG nails for header and (5) 10d x 1-1/2 HDG nails for joist. 18 Gauge. Pending IAPMO-ES evaluation. W1 x W2 x O.A.H=1-7/16 x 1-7/16x 5 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$80.66for 50 EA
Retail $142.50
Mfr PN: CSH-TZ
Stock: 0

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:
SpectrumSuperStore is UpFront

About UsContact UsCustomer Service & PoliciesMerchant ServicePrivacy StatementCustomer FeedbackReturn Policy

Copyright © 1999-2020 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.