ReceptXtenders- electrical receptacle box extender - 1/2 Single Gang (50-Pk) ReceptXtenders- electrical receptacle box extender - 1/2 Single Gang (50-Pk)
Online
$42.00 for Each
Retail $45.00
Mfr PN: 30004
Stock: 699
Why Pull Out The Box

ReceptXtenders extend the receptacle or switch box flush with the newly installed wall surface. ReceptXtenders fit all style boxes including new and old work boxes. ReceptXtenders are UL Listed and approved for use on all style boxes including PVC, Fiberglass or Steel. MADE IN THE USA.

ReceptXtenders electrical box extenders are specially designed to work with both PVC and metal receptacle boxes. The patented rear flange allows ReceptXtenders to fit snugly against the box to assure no gaps are present between the existing box and your newly installed extender. This feature assures ReceptXtenders meet all electrical codes. ReceptXtenders are U.L. listed and made from non-flammable, self-extinguishing materials. ReceptXtenders allow you to shim out that electrical box flush with the newly installed wall covering without removing or repositioning the existing box. This saves time and money.

ReceptXtenders were the original non-metallic receptacle box extender utilizing a simple mounting method. Other extension devices required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders use the two existing holes in the receptacle box as the means to mount the ReceptXtenders and then the receptacle. Previously, this means of attachment was not allowed by UL. We lobbied hard to show how important it was to have a simple device that every electrician and home remodeler would use. After extensive testing, ReceptXtenders were one of the first non-metallic outlet box extender to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and snugly against every type of receptacle box. Since ReceptXtenders are the only receptacle box extender to completely seal around the perimeter of the existing box we believe ReceptXtenders are the only device that truly meets 2002 NEC 314-20 that requires the box to be flush with the surface of combustionable wall surfaces. Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems

ReceptXtenders receptacle box extenders are proudly made in the USA of the finest flame retardant materials.

UL file QCMZ. E174133

The existing screws are normally long enough to be used again.
Online
$42.00 for Each
Retail $45.00
Mfr PN: 30004
Stock: 699

ReceptXtenders - electrical receptacle box extender - 3/8 Single Gang (50-Pk) ReceptXtenders - electrical receptacle box extender - 3/8 Single Gang (50-Pk)
Online
$39.66 for Each
Retail $42.50
Mfr PN: 30003
Stock: 850
Why Pull Out The Box

ReceptXtenders extend the receptacle or switch box flush with the newly installed wall surface. ReceptXtenders fit all style boxes including new and old work boxes. ReceptXtenders are UL Listed and approved for use on all style boxes including PVC, Fiberglass or Steel. MADE IN THE USA.

ReceptXtenders electrical box extenders are specially designed to work with both PVC and metal receptacle boxes. The patented rear flange allows ReceptXtenders to fit snugly against the box to assure no gaps are present between the existing box and your newly installed extender. This feature assures ReceptXtenders meet all electrical codes. ReceptXtenders are U.L. listed and made from non-flammable, self-extinguishing materials. ReceptXtenders allow you to shim out that electrical box flush with the newly installed wall covering without removing or repositioning the existing box. This saves time and money.

ReceptXtenders were the original non-metallic receptacle box extender utilizing a simple mounting method. Other extension devices required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders use the two existing holes in the receptacle box as the means to mount the ReceptXtenders and then the receptacle. Previously, this means of attachment was not allowed by UL. We lobbied hard to show how important it was to have a simple device that every electrician and home remodeler would use. After extensive testing, ReceptXtenders were one of the first non-metallic outlet box extender to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and snugly against every type of receptacle box. Since ReceptXtenders are the only receptacle box extender to completely seal around the perimeter of the existing box we believe ReceptXtenders are the only device that truly meets 2002 NEC 314-20 that requires the box to be flush with the surface of combustionable wall surfaces. Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems

ReceptXtenders receptacle box extenders are proudly made in the USA of the finest flame retardant materials.

UL file QCMZ. E174133

The existing screws are long enough to be used again.
Online
$39.66 for Each
Retail $42.50
Mfr PN: 30003
Stock: 850

ReceptXtenders - electrical receptacle box extender - 3/4 Single Gang (50-Pk) ReceptXtenders - electrical receptacle box extender - 3/4 Single Gang (50-Pk)
Online
$46.20 for Each
Retail $49.50
Mfr PN: 30006
Stock: 599
Why Pull Out The Box

ReceptXtenders extend the receptacle or switch box flush with the newly installed wall surface. ReceptXtenders fit all style boxes including new and old work boxes. ReceptXtenders are UL Listed and approved for use on all style boxes including PVC, Fiberglass or Steel. MADE IN THE USA.

ReceptXtenders electrical box extenders are specially designed to work with both PVC and metal receptacle boxes. The patented rear flange allows ReceptXtenders to fit snugly against the box to assure no gaps are present between the existing box and your newly installed extender. This feature assures ReceptXtenders meet all electrical codes. ReceptXtenders are U.L. listed and made from non-flammable, self-extinguishing materials. ReceptXtenders allow you to shim out that electrical box flush with the newly installed wall covering without removing or repositioning the existing box. This saves time and money.

ReceptXtenders were the original non-metallic receptacle box extender utilizing a simple mounting method. Other extension devices required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders use the two existing holes in the receptacle box as the means to mount the ReceptXtenders and then the receptacle. Previously, this means of attachment was not allowed by UL. We lobbied hard to show how important it was to have a simple device that every electrician and home remodeler would use. After extensive testing, ReceptXtenders were one of the first non-metallic outlet box extender to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and snugly against every type of receptacle box. Since ReceptXtenders are the only receptacle box extender to completely seal around the perimeter of the existing box we believe ReceptXtenders are the only device that truly meets 2002 NEC 314-20 that requires the box to be flush with the surface of combustionable wall surfaces. Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems

ReceptXtenders receptacle box extenders are proudly made in the USA of the finest flame retardant materials.

UL file QCMZ. E174133

Online
$46.20 for Each
Retail $49.50
Mfr PN: 30006
Stock: 599

ReceptXtenders-electrical receptacle box extender - 1/4 Single Gang (50-Pk) ReceptXtenders-electrical receptacle box extender - 1/4 Single Gang (50-Pk)
Online
$36.92 for Each
Retail $39.00
Mfr PN: 30002
Stock: 750
Why Pull Out The Box

ReceptXtenders extend the receptacle or switch box flush with the newly installed wall surface. ReceptXtenders fit all style boxes including new and old work boxes. ReceptXtenders are UL Listed and approved for use on all style boxes including PVC, Fiberglass or Steel. MADE IN THE USA.

ReceptXtenders electrical box extenders are specially designed to work with both PVC and metal receptacle boxes. The patented rear flange allows ReceptXtenders to fit snugly against the box to assure no gaps are present between the existing box and your newly installed extender. This feature assures ReceptXtenders meet all electrical codes. ReceptXtenders are U.L. listed and made from non-flammable, self-extinguishing materials. ReceptXtenders allow you to shim out that electrical box flush with the newly installed wall covering without removing or repositioning the existing box. This saves time and money.

ReceptXtenders were the original non-metallic receptacle box extender utilizing a simple mounting method. Other extension devices required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders use the two existing holes in the receptacle box as the means to mount the ReceptXtenders and then the receptacle. Previously, this means of attachment was not allowed by UL. We lobbied hard to show how important it was to have a simple device that every electrician and home remodeler would use. After extensive testing, ReceptXtenders were one of the first non-metallic outlet box extender to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and snugly against every type of receptacle box. Since ReceptXtenders are the only receptacle box extender to completely seal around the perimeter of the existing box we believe ReceptXtenders are the only device that truly meets 2002 NEC 314-20 that requires the box to be flush with the surface of combustionable wall surfaces. Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems

ReceptXtenders receptacle box extenders are proudly made in the USA of the finest flame retardant materials.

UL file QCMZ. E174133

The existing screws are long enough to be used again.
Online
$36.92 for Each
Retail $39.00
Mfr PN: 30002
Stock: 750

ReceptXtenders- electrical receptacle box extender - 1/4 Double Gang (25-Pk) ReceptXtenders- electrical receptacle box extender - 1/4 Double Gang (25-Pk)
Online
$29.40 for Each
Retail $31.50
Mfr PN: 30022
Stock: 139
Why Pull Out The Box

ReceptXtenders extend the receptacle or switch box flush with the newly installed wall surface. ReceptXtenders fit all style boxes including new and old work boxes. ReceptXtenders are UL Listed and approved for use on all style boxes including PVC, Fiberglass or Steel. MADE IN THE USA.

ReceptXtenders electrical box extenders are specially designed to work with both PVC and metal receptacle boxes. The patented rear flange allows ReceptXtenders to fit snugly against the box to assure no gaps are present between the existing box and your newly installed extender. This feature assures ReceptXtenders meet all electrical codes. ReceptXtenders are U.L. listed and made from non-flammable, self-extinguishing materials. ReceptXtenders allow you to shim out that electrical box flush with the newly installed wall covering without removing or repositioning the existing box. This saves time and money.

ReceptXtenders were the original non-metallic receptacle box extender utilizing a simple mounting method. Other extension devices required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders use the two existing holes in the receptacle box as the means to mount the ReceptXtenders and then the receptacle. Previously, this means of attachment was not allowed by UL. We lobbied hard to show how important it was to have a simple device that every electrician and home remodeler would use. After extensive testing, ReceptXtenders were one of the first non-metallic outlet box extender to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and snugly against every type of receptacle box. Since ReceptXtenders are the only receptacle box extender to completely seal around the perimeter of the existing box we believe ReceptXtenders are the only device that truly meets 2002 NEC 314-20 that requires the box to be flush with the surface of combustionable wall surfaces. Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems

ReceptXtenders receptacle box extenders are proudly made in the USA of the finest flame retardant materials.

UL file QCMZ. E174133

The existing screws are long enough to be used again.
Online
$29.40 for Each
Retail $31.50
Mfr PN: 30022
Stock: 139

ReceptXtenders- electrical receptacle box extender - 1/2 Double Gang (25-Pk) ReceptXtenders- electrical receptacle box extender - 1/2 Double Gang (25-Pk)
Online
$34.06 for Each
Retail $36.50
Mfr PN: 30024
Stock: 120
Why Pull Out The Box

ReceptXtenders extend the receptacle or switch box flush with the newly installed wall surface. ReceptXtenders fit all style boxes including new and old work boxes. ReceptXtenders are UL Listed and approved for use on all style boxes including PVC, Fiberglass or Steel. MADE IN THE USA.

ReceptXtenders electrical box extenders are specially designed to work with both PVC and metal receptacle boxes. The patented rear flange allows ReceptXtenders to fit snugly against the box to assure no gaps are present between the existing box and your newly installed extender. This feature assures ReceptXtenders meet all electrical codes. ReceptXtenders are U.L. listed and made from non-flammable, self-extinguishing materials. ReceptXtenders allow you to shim out that electrical box flush with the newly installed wall covering without removing or repositioning the existing box. This saves time and money.

ReceptXtenders were the original non-metallic receptacle box extender utilizing a simple mounting method. Other extension devices required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders use the two existing holes in the receptacle box as the means to mount the ReceptXtenders and then the receptacle. Previously, this means of attachment was not allowed by UL. We lobbied hard to show how important it was to have a simple device that every electrician and home remodeler would use. After extensive testing, ReceptXtenders were one of the first non-metallic outlet box extender to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and snugly against every type of receptacle box. Since ReceptXtenders are the only receptacle box extender to completely seal around the perimeter of the existing box we believe ReceptXtenders are the only device that truly meets 2002 NEC 314-20 that requires the box to be flush with the surface of combustionable wall surfaces. Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems

ReceptXtenders receptacle box extenders are proudly made in the USA of the finest flame retardant materials.

UL file QCMZ. E174133

The existing screws are usually long enough to be used again.
Online
$34.06 for Each
Retail $36.50
Mfr PN: 30024
Stock: 120

ReceptXtenders- electrical receptacle box extender - 3/4 Double Gang (25-Pk) ReceptXtenders- electrical receptacle box extender - 3/4 Double Gang (25-Pk)
Online
$36.40 for Each
Retail $39.00
Mfr PN: 30026
Stock: 300
Why Pull Out The Box

ReceptXtenders extend the receptacle or switch box flush with the newly installed wall surface. ReceptXtenders fit all style boxes including new and old work boxes. ReceptXtenders are UL Listed and approved for use on all style boxes including PVC, Fiberglass or Steel. MADE IN THE USA.

ReceptXtenders electrical box extenders are specially designed to work with both PVC and metal receptacle boxes. The patented rear flange allows ReceptXtenders to fit snugly against the box to assure no gaps are present between the existing box and your newly installed extender. This feature assures ReceptXtenders meet all electrical codes. ReceptXtenders are U.L. listed and made from non-flammable, self-extinguishing materials. ReceptXtenders allow you to shim out that electrical box flush with the newly installed wall covering without removing or repositioning the existing box. This saves time and money.

ReceptXtenders were the original non-metallic receptacle box extender utilizing a simple mounting method. Other extension devices required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders use the two existing holes in the receptacle box as the means to mount the ReceptXtenders and then the receptacle. Previously, this means of attachment was not allowed by UL. We lobbied hard to show how important it was to have a simple device that every electrician and home remodeler would use. After extensive testing, ReceptXtenders were one of the first non-metallic outlet box extender to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and snugly against every type of receptacle box. Since ReceptXtenders are the only receptacle box extender to completely seal around the perimeter of the existing box we believe ReceptXtenders are the only device that truly meets 2002 NEC 314-20 that requires the box to be flush with the surface of combustionable wall surfaces. Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems

ReceptXtenders receptacle box extenders are proudly made in the USA of the finest flame retardant materials.

UL file QCMZ. E174133

Online
$36.40 for Each
Retail $39.00
Mfr PN: 30026
Stock: 300

ReceptXtenders - electrical receptacle box extender - 3/8" double gang extender (25-pack) ReceptXtenders - electrical receptacle box extender - 3/8" double gang extender (25-pack)
Online
$32.18 for Each
Retail $34.00
Mfr PN: 30023
Stock: 380
Why Pull Out The Box

ReceptXtenders extend the receptacle or switch box flush with the newly installed wall surface. ReceptXtenders fit all style boxes including new and old work boxes. ReceptXtenders are UL Listed and approved for use on all style boxes including PVC, Fiberglass or Steel. MADE IN THE USA.

ReceptXtenders electrical box extenders are specially designed to work with both PVC and metal receptacle boxes. The patented rear flange allows ReceptXtenders to fit snugly against the box to assure no gaps are present between the existing box and your newly installed extender. This feature assures ReceptXtenders meet all electrical codes. ReceptXtenders are U.L. listed and made from non-flammable, self-extinguishing materials. ReceptXtenders allow you to shim out that electrical box flush with the newly installed wall covering without removing or repositioning the existing box. This saves time and money.

ReceptXtenders were the original non-metallic receptacle box extender utilizing a simple mounting method. Other extension devices required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders use the two existing holes in the receptacle box as the means to mount the ReceptXtenders and then the receptacle. Previously, this means of attachment was not allowed by UL. We lobbied hard to show how important it was to have a simple device that every electrician and home remodeler would use. After extensive testing, ReceptXtenders were one of the first non-metallic outlet box extender to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and snugly against every type of receptacle box. Since ReceptXtenders are the only receptacle box extender to completely seal around the perimeter of the existing box we believe ReceptXtenders are the only device that truly meets 2002 NEC 314-20 that requires the box to be flush with the surface of combustionable wall surfaces. Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems

ReceptXtenders receptacle box extenders are proudly made in the USA of the finest flame retardant materials.

UL file QCMZ. E174133

The existing screws are long enough to be used again.
Online
$32.18 for Each
Retail $34.00
Mfr PN: 30023
Stock: 380

EZ18SNWV SNG GANG NAIL ON BOX EZ18SNWV SNG GANG NAIL ON BOX
Online
$0.33 for 1 EA
Retail $0.35
Mfr PN: EZ18SNWV
Stock: 4983
This item can NOT be shipped to these states CA
EZ BOX SINGLE GANG NEW WORK BOXES New work non-metallic switch & outlet boxes With enhanced angled nails that make mounting- between studs EZ and more secure New construction box features 4 V-clamps - making wiring easier during installation Boxes are 3.7" height x 2-1/4" width Dimensions are nominal UL Certified - 2 hour fire-rated EZ18SNV SNGL GANG NAIL ON BOX SIZE:2-7/8"D - 18 CU COLOR:Gray
Online
$0.33 for 1 EA
Retail $0.35
Mfr PN: EZ18SNWV
Stock: 4983

FLOOR BOX COVER BRASS DUPLEX RECEPTACLE 5-3/4" DIAMETER FLOOR BOX COVER BRASS DUPLEX RECEPTACLE 5-3/4" DIAMETER
Online
$67.94 for Each
Retail $101.91
Mfr PN: P60CACP
Stock: 0
Floor box cover | one piece brass carpet plate | 5-3/4" diameter | includes sealing gasket and #8 32 x 1" brass screws | use with 68 and 600 series floor boxes
Online
$67.94 for Each
Retail $101.91
Mfr PN: P60CACP
Stock: 0

5320-0 GR SINGLE GANG OUTDOOR BOX 5320-0 GR SINGLE GANG OUTDOOR BOX
Online
$3.16 for 1 EA
Retail $4.29
Mfr PN: 5320-0
Stock: 8
SINGLE-GANG OUTDOOR BOX For branch circuit wiring in dry & wet locations Use as junction box or receptacle/switch housing Made of die-cast aluminum 2" deep with lugs Box size: 4-1/2"x 2-3/4" 3 threaded outlets- NPT Model 5320 has 1/2" outlets-5324 has 3/4" 2 closure plugs included-ground screw installed 5320-0 GR SGL GANG OUTDOOR BOX PACK/SIZE:Shrink Wrap/1/2" COLOR:Gray
Online
$3.16 for 1 EA
Retail $4.29
Mfr PN: 5320-0
Stock: 8

7846RAC 3G NAIL ON SWITCH BOX 7846RAC 3G NAIL ON SWITCH BOX
Online
$3.49 for 1 EA
Retail $5.39
Mfr PN: 7846RAC
Stock: 26
THREE-GANG NONMETALLIC CABLE BOX For nonmetallic sheathed cable With captive nails for metal or wood studs Use in branch circuit wiring to splice wires For switches & receptacle wiring devices Self-clamping wire entry clamps Positioning tabs for mounting on studs or joists 12 cable clamps; bracket support, 1/2" setback UL listed 7846RAC 3G NAIL ON SWITCH BOX
Online
$3.49 for 1 EA
Retail $5.39
Mfr PN: 7846RAC
Stock: 26

976 ADJUSTABLE BOX EXTENSION 976 ADJUSTABLE BOX EXTENSION
Online
$2.78 for 1 EA
Retail $3.89
Mfr PN: 976
Stock: 63
ADJUSTABLE BOX EXTENSION Extends switch box Adjustment range: 1/4" to 1" Two 1-1/8" screws included 976 ADJUSTABLE BOX EXTENSION
Online
$2.78 for 1 EA
Retail $3.89
Mfr PN: 976
Stock: 63

7824RAC 4 IN. NAIL ON CEILING BOX 7824RAC 4 IN. NAIL ON CEILING BOX
Online
$1.98 for 1 EA
Retail $2.79
Mfr PN: 7824RAC
Stock: 142
4" ROUND NON METALLIC CEILING CABLE BOX 4" round nonmetallic round ceiling box Use in branch circuit wiring to splice wires W/captive nails-self-grip wire clamps-3/8" setback Use to install lighting fixture canopies Not designed for ceiling fan support Optional front-mounted grounding screw Heavy-duty engineered compound, polycarbonate base UL listed 7824RAC 4 IN. NAIL ON CEILING BOX SIZE:4"
Online
$1.98 for 1 EA
Retail $2.79
Mfr PN: 7824RAC
Stock: 142

OUTLET PANEL RV PWR OUTDR 50A OUTLET PANEL RV PWR OUTDR 50A
Online
$42.49 for Each
Mfr PN: PS-54-HR
Stock: 0
Amp Rating=50 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$42.49 for Each
Mfr PN: PS-54-HR
Stock: 0

7820RAC SNGL GANG SWITCH BOX 7820RAC SNGL GANG SWITCH BOX
Online
$0.80 for 1 EA
Retail $1.19
Mfr PN: 7820RAC
Stock: 238
SINGLE-GANG NONMETALLIC CABLE BOX For nonmetallic sheathed cable With captive nails Use in branch circuit wiring to splice wires For switches & receptacle wiring devices Positioning tabs for mounting on studs or joists Heavy duty PVC compound 4 cable knockouts, 1/2" setback UL listed 7820RAC SNGL GANG SWITCH BOX SIZE:3-3/16" deep
Online
$0.80 for 1 EA
Retail $1.19
Mfr PN: 7820RAC
Stock: 238

EZXKLR 4 IN. 2 GANG SQUARE COVER EZXKLR 4 IN. 2 GANG SQUARE COVER
Online
$0.91 for 1 EA
Retail $1.29
Mfr PN: EZXKLR
Stock: 35
This item can NOT be shipped to these states CA
2-GANG 4" SQUARE EZ BOX BLANK COVER 2-gang blank box cover is ideal for covering - 2-gang electrical boxes Durable PVC cover will not rust or corrode Keyhole & notch design for easy installation Designed for indoor use ETL Listed EZXKLR 4 IN. 2 GANG SQUARE COVER COLOR:Gray
Online
$0.91 for 1 EA
Retail $1.29
Mfr PN: EZXKLR
Stock: 35

5324-5 GR SINGLE GANG OUTDOOR BOX 5324-5 GR SINGLE GANG OUTDOOR BOX
Online
$5.33 for 1 CD
Retail $7.99
Mfr PN: 5324-5
Stock: 180
SINGLE-GANG OUTDOOR BOX For branch circuit wiring in dry & wet locations Use as junction box or receptacle/switch housing Made of die-cast aluminum 2" deep with lugs Box size: 4-1/2"x 2-3/4" 3 threaded outlets- NPT Model 5320 has 1/2" outlets-5324 has 3/4" 2 closure plugs included-ground screw installed 5324-5 GR SGL GANG OUTDOOR BOX PACK/SIZE:Carded / 3/4" COLOR:Gray
Online
$5.33 for 1 CD
Retail $7.99
Mfr PN: 5324-5
Stock: 180

5133710U 6X6X4 IN. JUNCTION BOX 5133710U 6X6X4 IN. JUNCTION BOX
Online
$14.97 for 1 EA
Retail $20.99
Mfr PN: 5133710U
Stock: 33
This item can NOT be shipped to these states CA
MOLDED JUNCTION BOX Ridgid PVC junction box with neoprene gasket Zinc plated steel screws Designed to support electrical devices and - fixtures & protection of wires & terminals 6" x 6"x 4" NEMA rating for Types 1, 3.3S, 4, 4X, 5, 6, & 6P UL Listed - Marine listed 5133710U 6X6X4 IN. JUNCTION BOX SIZE:6"x6"x4"
Online
$14.97 for 1 EA
Retail $20.99
Mfr PN: 5133710U
Stock: 33

EZ18CO 3/0 ROUND OLD WORK BOX EZ18CO 3/0 ROUND OLD WORK BOX
Online
$2.58 for 1 EA
Retail $3.59
Mfr PN: EZ18C0
Stock: 624
This item can NOT be shipped to these states CA
EZ BOX SHALLOW OLD WORK CEILING BOX 18 cu.in. shallow box for renovation (old work)- applications in residential/light commercial use Has EZ mount flanges, wing tabs and built-in - wire clamps to make installation easy Made of durable polycarbonate Supports fixtures up to 6 lb. but is NOT - suitable for ceiling fans Nominal dimensions: 4.38"H x 4.328"W x 2.68"D EZ18CO 3/0 RND OLD WORK BOX SIZE:18 Cu.In. UL Classified - 2 hour fire-rated
Online
$2.58 for 1 EA
Retail $3.59
Mfr PN: EZ18C0
Stock: 624

LOW VOLTAGE OLD WORK BRACKET 2 GANG NON-METALLIC LOW VOLTAGE OLD WORK BRACKET 2 GANG NON-METALLIC
Online
$35.04 for 12 Each
Retail $52.56
Mfr PN: SC200RR
Stock: 0
For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed. Color=Orange This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$35.04 for 12 Each
Retail $52.56
Mfr PN: SC200RR
Stock: 0

Carlon Adjust-A-Box MB120ADJ Adjustable Switch Box, 1 Gang, 20 cu-in x 3.28 in L x 2.2 in W Carlon Adjust-A-Box MB120ADJ Adjustable Switch Box, 1 Gang, 20 cu-in x 3.28 in L x 2.2 in W
Online
$4.50 for Each
Retail $5.35
Mfr PN: MB120ADJ
Stock: 0
Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make i t flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed. 3.52" Deep x 2.2" x 3.28" Cu In/ 1/2" KOs=20/5Gang=Single This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$4.50 for Each
Retail $5.35
Mfr PN: MB120ADJ
Stock: 0

404 3-3/4X2 IN. 1 IN. DEEP SWITCH BOX 404 3-3/4X2 IN. 1 IN. DEEP SWITCH BOX
Online
$3.13 for 1 EA
Retail $4.29
Mfr PN: 404
Stock: 0
SINGLE-GANG SWITCH BOX W/Q-CLAMP Shallow switch box with Q-clamp 1" deep non-gangable Size: 3-3/4" x 2" Cubic inches: 6.5 404 3-3/4X2 IN. 1 IN. DEEP SWITCH BOX SIZE:1"
Online
$3.13 for 1 EA
Retail $4.29
Mfr PN: 404
Stock: 0

8233 4 IN. SQUARE 2 1/8 IN. DP WELDED BOX 8233 4 IN. SQUARE 2 1/8 IN. DP WELDED BOX
Online
$4.24 for 1 EA
Retail $6.49
Mfr PN: 8233
Stock: 58
4" SQUARE BOX WITH CONDUIT KNOCKOUTS 2-1/8" deep, welded Install in ceilings or walls For lighting fixtures, switches or receptacles Use when multiple conductors split into two/more Combination screw heads Knockouts sides - (8) 1" Knockouts bottom - 3-1/2", 2-3/4" UL listed 8233 4 IN. SQ 2 1/8 IN. DP WELDED BOX
Online
$4.24 for 1 EA
Retail $6.49
Mfr PN: 8233
Stock: 58

7120 4 IN. ROUND CEILING FAN BOX 7120 4 IN. ROUND CEILING FAN BOX
Online
$6.86 for 1 EA
Retail $8.99
Mfr PN: 7120
Stock: 27
RACO 4" ROUND CEILING FAN & FIXTURE BOX Saddle-box 4" round nonmetallic cable box for - use in ceiling fan support & heavy light fixture Unique U-shaped design allows box to mount - on any standard 1-1/2" wide joist Self-clamping wire entry clamps Offers optional front-mounted grounding screw UL Listed - 2 hour fire rating 7120 4 IN. ROUND CEILING FAN BOX SIZE:4"
Online
$6.86 for 1 EA
Retail $8.99
Mfr PN: 7120
Stock: 27

653 4 IN. X2 IN. HANDY BOX EXTENSION 653 4 IN. X2 IN. HANDY BOX EXTENSION
Online
$1.93 for 1 EA
Retail $2.69
Mfr PN: 653
Stock: 288
HANDY BOX EXTENSION 1/2" knockouts Size: 4" x 2-1/8" 1-7/8" deep Cubic inches: 13.0 653 4 IN. X2 IN. HANDY BOX EXTENSION SIZE:4"
Online
$1.93 for 1 EA
Retail $2.69
Mfr PN: 653
Stock: 288

130010006001 WHITE OCTAGON MOUNT BLOCK 130010006001 WHITE OCTAGON MOUNT BLOCK
Online
$6.86 for Each
Retail $7.99
Mfr PN: 130010006001
Stock: 0
OCTAGON MOUNTING BLOCK Surface mount for light fixture 6.7 x 6.7" outside dimensions Fits all type siding 40 year warranty 130010006001 WH OCT MNT BLOCK COLOR:White
Online
$6.86 for Each
Retail $7.99
Mfr PN: 130010006001
Stock: 0

EZ14SO 14CU IN OLD WORK BOX EZ14SO 14CU IN OLD WORK BOX
Online
$1.53 for 1 EA
Retail $1.99
Mfr PN: EZ14SO
Stock: 753
This item can NOT be shipped to these states CA
EZ-BOX SINGLE GAND OLD WORK S&O BOX 14 cu.in. 1-gang renovation application old work switch or outlet box For residential or light commercial use Has EZ mount flanges, winged swing tabs and - 4 built-in integral wire clamps for EZ and - secure installation Nominal dimensions: 3.125"H x 2.25"W x 2.75"D UL Classified - 2 hour fire-rated EZ14SO 14CU IN OLD WORK BOX SIZE:14 Cu.In.
Online
$1.53 for 1 EA
Retail $1.99
Mfr PN: EZ14SO
Stock: 753

TAYMAC® METAL THREE DEVICE WEATHER PROOF COVER, GRAY TAYMAC® METAL THREE DEVICE WEATHER PROOF COVER, GRAY
Online
$35.48 for 3 Each
Retail $74.94
Mfr PN: MX3050S
Stock: 0
| Heavy Duty Die-Cast Metal Construction | Patented Universal-Fit™ Adapter Technology | Lockable Tab | Premium Powdercoat Finish | Patented Quick-Fit™ Keyhole Mounting System Allows Installation in Under a Minute | Spring Hinge Closure | UL® Listed and 2011 NEC® and NEMA® 3R Compliant
Online
$35.48 for 3 Each
Retail $74.94
Mfr PN: MX3050S
Stock: 0

Reliance PB30 Manual Outdoor Power Inlet Box, Gray Reliance PB30 Manual Outdoor Power Inlet Box, Gray
Online
$51.86 for Each
Retail $62.25
Mfr PN: PB30
Stock: 0
30 AMP GENERATOR POWER INLET BOX 30 Amp power inlet metal box with NEMA L14-30- power inlet to be installed outdoors Must be in open area where generator is used Three 3/4" knockouts - 1 on each side & back To be wired directly to transfer switch or panel 100 cu.in. wiring space & slide-out access base 7500 watts maximum generator running watts 30 Amp @ 125/250 VAC max generator input PB30 30AMP POWER INLET BOX SIZE:30 Amp COLOR:GrayOutdoor, NEMA 3R
Online
$51.86 for Each
Retail $62.25
Mfr PN: PB30
Stock: 0

EZ25DO 25CU IN OLD WORK BOX EZ25DO 25CU IN OLD WORK BOX
Online
$2.73 for 1 EA
Retail $3.79
Mfr PN: EZ25DO
Stock: 321
This item can NOT be shipped to these states CA
EZ BOX TWO GANG OLD WORK S&O BOX 25 cu.in. two gang renovation application - (old work) switch or outlet box For residential or light commercial uses Has EZ mount flanges, winged swing tabs and - 6 built-in clamps for EZ & secure wiring Nominal dimensions: 3.125"H x 4"W x 2.875"D UL Classified - 2 hour fire-rated EZ25DO 25CU IN OLD WORK BOX SIZE:25 Cu. In.
Online
$2.73 for 1 EA
Retail $3.79
Mfr PN: EZ25DO
Stock: 321

EZ08CZ 8CU CEILING FAN BOX EZ08CZ 8CU CEILING FAN BOX
Online
$4.15 for 1 EA
Retail $5.69
Mfr PN: EZ08CZ
Stock: 24
This item can NOT be shipped to these states CA
EZ BOX SHALLOW 8 CU.IN. NEW WORK CEILING FAN BOX 8 cu.in. shallow new construction (new work) - ceiling fan box for residential/light commercial Use with shallow ceiling fan box is needed Supports fans up to 35 lb.-fixtures up to 50 lb. Mounting screws included Made of durable polycarbonate Nominal dimensions: 4.25"H x 4.25"W x 1.00"D UL Classified - 2 hour fire-rated EZ08CZ 8CU CEILING FAN BOX SIZE:8.0 Cu.In.
Online
$4.15 for 1 EA
Retail $5.69
Mfr PN: EZ08CZ
Stock: 24