90 Pound Breaking Load Limit. Lightweight. Rust-proof.
38,000 PSI TENSILE STRENGTH
17 Gauge - 250'
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Joins, mends and repairs all fence wire easily. One splice per join. For a secure and permanent rust resistant connection. No. GB5 - For 15-1/2 gauge hi-tensile "Gaucho" barbed wire. Nos. LBW1 and LBW5 - For 12-1/2 gauge barbed, 9 gauge smooth wire. No. S
S5 - For 12-1/2 gauge hi-tensile smooth, woven fence. No. ST5 - For 12-1/2 gauge hi-tensile smooth, woven fence. Stainless steel. No. WW5 - for 10-16 gauge smooth, electric, woven fence. Use only with Splice-It Crimp 'n Cut Tool No. (663.6252).
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Fence repair splice for 12.5 gauge barbed wire. Use for repairing broken wire together permanently or use as a joiner without any tools. Unique preformed rod helical design makes hand installation easy. Use on both T-post and regular post fencing systems.
|
For 18 gauge barbed wire/12.5 smooth gauge wire/14 gauge smooth wire. Bracing solution for electric fence systems using t-posts and regular posts. Insulates the electric fence wire from the grounded post. Ideal in insulated and non-insulated fencing termi
nations. No special tools or accessories needed. Simple hand weave installation with smooth rigid fit. Safe and strong for animal containment. Manufactured from tough galvanized steel (Class 3 or above).
Lgth In=19.25
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Fence repair splice for 15.5 gauge barbed wire/10 gauge smooth wire. Use for repairing broken wire together permanently or use as a joiner without any tools. Unique preformed rod helical design makes hand installation easy. Use on both T-post and regular
post fencing systems. Works on any size smooth wire and barbed wire. Will not crack or rust. Manufactured through galvanized steel (Class 3 or above).
Lgth In=15.25
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Fence repair splice for 14 gauge barbed wire/9 gauge smooth wire. Use for repairing broken wire together permanently or use as a joiner without any tools. Unique preformed rod helical design makes hand installation easy. Use on both T-post and regular pos
t fencing systems. Works on any size smooth wire and barbed wire. Will not crack or rust. Manufactured through galvanized steel (Class 3 or above).
Lgth In=16
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Low tensile for greater flexibility. NOTE: 80 R 1/4 MILE - 160 R 1/2 MILE.
17 GAUGE GALVANIZED STEEL
Lgth Mile=1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Low tensile for greater flexibility. NOTE: 80 R 1/4 MILE - 160 R 1/2 MILE.
17 GAUGE GALVANIZED STEEL
Lgth Mile=1/4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Low tensile for greater flexibility. NOTE: 80 R 1/4 MILE - 160 R 1/2 MILE.
14 GAUGE GALVANIZED STEEL
Lgth Mile=1/4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Joins, mends and repairs all fence wire easily. One splice per join. For a secure and permanent rust resistant connection. No. GB5 - For 15-1/2 gauge hi-tensile "Gaucho" barbed wire. Nos. LBW1 and LBW5 - For 12-1/2 gauge barbed, 9 gauge smooth wire. No. S
S5 - For 12-1/2 gauge hi-tensile smooth, woven fence. No. ST5 - For 12-1/2 gauge hi-tensile smooth, woven fence. Stainless steel. No. WW5 - for 10-16 gauge smooth, electric, woven fence. Use only with Splice-It Crimp 'n Cut Tool No. (663.6252).
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
500 Feet - 20 Gauge
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
SNO-GUARD SNO FENCE - ORANGE
Drift control - mesh design optimized -
for slowing wind
Good porosity factor for storing snow
Strong plastic resists wind damage
Highly visible & UV resistant
Recyclable, reusable and economical
1.8" x 1.8" mesh size
190042 4 FT. X50 FT. ORANGE SNO-GUARD
SIZE:48" x 50 Ft.
COLOR:Hi-Vis Orange
|
FOR 2" GATES
Size In=3/4 x 12
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
QUICK-LATCH GATE LATCH
Fastest - easiest chain latch
Hog-cattle and horse proof - feedlot safe
Tie stalls
Gloves on operation
To assemble - insert end of chain and drive pin -
through - second part; insert end of chain and -
close cold shut
Accepts up to 1/4" proof coil chain
QL QUICK LATCH GATE LATCH
|
Designed for easy attachment to t-posts. Coated with Class I galvanizing.
FASTENERS MUST BE ORDERED SEPARATELY
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
9-1/2'' gauge galvanized annealed wire. Made with a barb lock that eliminates stay movement and prevents zinc coating from being rubbed off. A universal twist makes the stay easy to auger down.
Bundle - Class I
Lgth In=42
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Made with an exclusive barb lock that eliminates stay movement and prevents zinc coating from being rubbed off. A universal twist makes the stay easy to auger down. Class III Galvanation.
Bundle - Class III
Lgth In=48
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
T-POST WIRE CLIPS
Designed for easy attachment to studded T-Posts
Coated with Class I galvanizing
Packed in plastic bag
30052451 25/BG T-POST CLIPS
QTY/PACK:25 Clips/Bag
|
Provides stronger fence connections and simplifies fence assembly. Can be installed before posts are set to help ensure uniform spacing and alignment. Requires five 6d HDG fasteners for rails and three 8d HDG fasteners for posts.
1-9/16"W X 3-3/8"H - 20 GAUGE - 2 X 4 RAIL SIZE
For ACQ Pressure Treated Lumber
Finish=Triple Zinc
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Secures nominal sized post to wood surfaces offering some lateral and uplift resistance. May be used only for intermediate posts between fully anchored corner/end posts in rail system. Not Recommended for fence posts or other unrestrained (not fixed or fa
stened at top) applications. Not designed to resist overturning (moment) loads. Requires 16d HDG fasteners for post and 16d HDG fasteners for base. Meets ICBO 2039 and L.A. City RR23888 codes. For additional information including allowable loads, please s
ee USP Lumber Connectors charts in the paper catalog R7 Reference Pages.
18 GAUGE - 3-9/16"W x 2-1/2"H x 3-3/8"L
Post Size In=4 x 4Finish=Triple Zinc
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. Use two caps for each installation project to act as a unit. Designed to work with single, solid sawn beams, but can be used with build-up beams ma
de of 2x lumber and shims fastened. "-TZ" following item number indicates Triple Zinc finish. "-GC" following item number indicates Gold Coat finish. Meets ICC-ES ESR-1781, FL18285 and L.A. City RR25843 codes. For additional information including allowabl
e loads loads and number of fasteners, please see USP Lumber Connectors charts in the paper catalog R7 Reference Pages.
18 GAUGE - TRIPLE ZINC
1-1/2"W X 2-1/2"H1 X 3"H2 X 5-9/16"L
Post Size In=6 x 6 - 6
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
RIO SAND ANCHOR
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
For light-duty post-to-beam connections. Quick and easy installation on decks, carports and other projects. One piece, designed to work with single, solid sawn beams, but can be used with build-up beams made of 2x lumber and shims fastened together to act
as a unit. Requires 16d HDG nails for installation. Meets ICC-ES ESR-1280, FL11664, L.A. City RR25749 and Dade County, FL 07-0306.06 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors cha
rts in the paper catalog R7 Reference Pages. 18 GAUGE.
Post Size In=6 x 6Finish=Triple Zinc
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Medium-duty straps connect beams to posts. Requires either (3) 1/2" bolts or (12) 16d nails for installation. Triple Zinc straps require HDG bolts or 16d HDG nails for installation.
G90 GALVANIZING
14 Gauge
WxHxL In=1-1/2 x 5 x 6
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Zinc plated screw hook for 1-5/8" gate.
5/8" x 6"
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Seamless, keeps water off post tops to protect wood from moisture damage. Corrosion-proof and paintable. Requires one 8d HDG or 10d HDG nail for installation. 3-5/8"W - For 4 x 4 Post/Column.
Color=Gray
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
316 stainless steel.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
For 18 gauge barbed wire/12.5 gauge smooth wire/14 gauge smooth wire. Bracing solution for fence systems using wooden posts. For use on T-post and regular posts. No special tools or accessories needed. Safe and strong for animal containment. Manufactured
from touch galvanized steel (Class 3 or above). Simple hand weave installation with smooth rigid fit.
Size In=20
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
M6 RH thread. For use with 3mm cable.
45MM
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Requires swaging tool. Use with 3mm wire rope M6 RH Thread.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
For 12.5 gauge barbed wire. Bracing solution for fence systems using wooden posts. For use on T-post and regular posts. No special tools or accessories needed. Safe and strong for animal containment. Manufactured from touch galvanized steel (Class 3 or ab
ove). Simple hand weave installation with smooth rigid fit.
Size In =25
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
PLATED HINGE FOR 1-5/8" DIAMETER GATE
Fits 5/8" Screw and Bolt Hooks
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 1999-2019 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |