SPEEDY MUD MIXER - 28" WITH 8" X 4 1/2" PADDLE

Plated finish
7/16" hex shaft will fit 1/2" drill

Use to repair, restore and renew worn or spalling concrete. Squeegee, trowel or brush applied. Apply from feather edge of 1/16 in to 1/2in. Walk on in 8 hours. Drive on in 24 hours. Superior flow and finish. Size Lb=40 This item cannot be shipped to APO/FPO addresses. Please accept our apologies

BIRDCAGE MIXER - 30" WITH 7 9/16" X 4 1/4" PADDLE

SPIRAL PAINT & MUD MIXER Spiral blade mixer to ensure even mix High quality plated steel construction Ideal for fast mixing of all kinds of - materials from paint to cement Requires a 1/2" drill with a minimum of - a 6 amp motor & maximum of 800 RPM to operate G15420 4 IN. SPIRAL MIXER SIZE:4"

DELUXE MUD MIXER Used to mix grouts, thin-sets and other - setting materials High quality plated steel for easy clean-up Shaft diameter 3/8", length 23-3/8", width 5" Requires 1/2" drill & minimum 6 AMP motor Maximum 800 RPM G02054 DELUXE MIXER

The Pro-Series 1.25 Cubic Foot Electric Cement Mixer is a great size for mixing concrete for small projects around the house. Use this cement mixer to build a backyard BBQ pit, pour a concrete slab for a shed, repair an in-ground pool, or set fence posts. This small Cement Mixer handles drywall mud, plaster, stucco, mortar, concrete and more. You could even use it on the farm to mix cattle feed or treat seeds before planting.
The Pro-Series 1.25 Cubic Foot Electric Cement Mixer has a 154 lbs dry mix capacity. The drum tips 360 degrees with a 10 inch opening, and a low profile height that is perfect for dumping the mix into forms and wheelbarrows. Two 8 inch rubber wheels make it easy to move around the job site.
Ideal for small projects around the house and farm
Plugs into standard household 110 volt outlet
For small building projects like setting fence posts and making small concrete pads
Mix small quantities of drywall mud, plaster, stucco, mortar, concrete and more
Mix feeds, fertilizers, compost and potting soil for the garden or farm
154 lbs. dry mix capacity, 1.25 cubic feet
Low-profile height is ideal for pouring into forms and wheelbarrows
10 in. diameter drum opening, drum tips 360 degrees
Two 8 inch rubber wheels for mobility
1/4 (.25) HP, belt driven motor, 120V, 60 Hz, 300 Watts, 2.7 Amps, direct drive gearbox
No-load motor speed 1150 RPM/minute, drum speed RPM/minute
Overall size 42 L x 17 wide x 34 H inches, drum opening is 18 inches from ground when turned 180 degrees

Use this mixing paddle with a heavy-duty drill and you+ll quickly get a perfect mix of Chamber-Tech 2000, Chamber Coat and any product that needs mixing.

24" long with 5" blades