• Securely holds line trimmers, brushcutters, edgers, shaft hedge clippers or pole saws • Three adjustable two inch wide slots to accommodate wide shaft pole saws • Heavy-duty black vinyl coating • Three keyed alike locks on TG3000 • For Use On Open Trailers • Easy to Install; • Dimensions : 8" x 33.5" x 4.25". • One Year Warranty. www.havenerent.com |
The new Smittybilt XRC winches have been thoroughly updated with heavy-duty features for enhanced performance and durability. Ranging from 9,500lb to 17,500 lbs capacities, Smittybilt's XRC Series winches can handle any situation you can get into. Every XRC winch features a Series Wound 6.6 HP motor and a 3-Stage Planetary Gear System with revised gear ratios for increased pulling power and lightning-fast line speeds. Every winch is finished in a rugged UV-Resistant matte black coating with stainless steel hardware and oversized aluminum crossbars to provide you with a great looking system that will last you a lifetime. Every XRC winch includes a heavy duty winch controller, four-way roller fairlead, forged steel tow hook, and a redesigned solenoid box that can be mounted in 3 different positions for maximum versatility. If you're looking for a winch equipped with a synthetic winch rope, look to the XRC Comp Series for the ultimate in pulling power and performance. A Smittybilt XRC winch is a complete recovery system with the muscle and reliability to bail you out of any situation.
|
Converts Receiver into Concealed Vault! Great for outdoor activities where keys are a hassle or can become lost Secure, concealed key storage that will not fall off like magnetic key holders How to use
Inside the box
|
12 v H/D Power ATV winch, 2,000 lbs
Specification: • Max load: 2000 lbs. stall rating and low amp draw • Wire rope: 5/32-in. x 49 ft. • Motor: 12V • Winch: 0.85 HP • Gear ratio: 153:1 Features include: • Tension plate • Free spool clutch • Length: 12.5" x Width: 9.75" x Height: 6.5" • Weight: 14 lbs |
Heavy-duty steel construction Powder-coated finish All hardware included Installs in 20 minutes or less Secures equipment and prevents damage Mounts to left or right side of equipment Fits Tire Size:7 inch to 11 inch; 5-1/8 inch wide. Dimensions: 9.5" x 14.5" x 9" www.havenerent.com |
POW'R TOW(TM) TOWING STARTER KIT
Made of high quality forged steel
Painted with rust resistant powder coating
Drop: 2" - Bar length: 8-1/2"
Rise: 3/4" - Hole size: 1"
Max Trailer Wt.: 6,000 Lb.
Max Tongue Wt.: 600 Lb.
Weight: 8.0 Lb.
2" diameter ball - includes pin and clip
2 IN. TOWING STARTER KIT
SIZE:2" Ball
DROP:2"
|
Box opening of 2" x 2". Balls and hook are chrome plated. Hook has a 10,000 pound capacity. 200/2,000 TW/GTW capacity for 1-7/8" ball hitches, 600/6,000 for 2", and 1,000/10,000 for 2-5/16". Receiver series 33,35,36,37,44.
Length In=8Color=Chrome/Black
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Custom design bolts directly to factory mounting points on the rear of the vehicle, very similar design to the OE Receiver Hitch. Durable powder coat design sheds water and provides a long lasting rust free finish. Designed as a one-piece welded assembly for added strength, we built our hitch receiver to match the towing capacity of your Jeep: 3,500-lb tow rating, 350-lb tongue weight rating with weight distributing equipment; otherwise 2000- lb tow rating, 200-lb tongue weight rating, 2 opening. The included wire harness is made to the original equipment specifications and plugs into the existing wiring harness, keeping you from having to make frustrating and costly modifications to the vehicles wiring.
Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited
2 and 4-door models
Hitch and plug in wiring harness
|
Protect your winch investment from the elements and show your Smittybilt pride with this XRC8 & XRC10 logo winch cover from Smittybilt
Fits 8000 lb to 12000 lb winch
Black canvas
Dimensions: 6 inches wide x 10 inches tall x 22 inches long
|
The multi-purpose snatch block will double the pulling power of any winch and can change your pulling direction without damaging the wire rope. Us of the snatch block will also help in reducing heat build up and amperage draw.
|
CONTROL BOX ASSEMBLY
|
REMOTE SOCKET AND PLUG
|
Secure towing cargo while towing or storing with this "keyed alike" lock set with two styles of universal coupler locks and one dual bent pin receiver lock. All three locks are operated with the same key. Includes universal coupler lock ( SKU 061656
5, factory number 72783) to secure trailer when not in use, brass coupler lock ( SKU 3776267, factory number 7005300) and dual bent pin lock that fits both 5/8" and 1/2" receivers ( SKU 9205220, factory number 70060).
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
REECE TRI-BALL MOUNT
One ball mount for 3 ball sizes
Eliminates carrying extra bars for -
different trailer size couplers
2" x 2" receiver box opening
Ball capacities: 1-7/8" / 200 lb.,-
2" ball / 600 lb. & 2-5/16" ball / 1000 Lb.
Black powder coat finish
21512 TRI-BALL MOUNT
|
Plug with three 12" leads and one 12" ground wire, color-coded to NMMA standards.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
CARBON FRAME & BRUSH ASSY
|
Winch with 20' strap and hook, 8' handle, two-way ratchet, 3/4" hub. 4:1:1 Gear ratio. Includes comfort grip handle for a positive hold while cranking. Zinc-plated finish for superior corrosion resistance. Heavy-duty rib reinforced frames maintain prope
r gear alignment. Full-length drum bushing and oil impregnated shaft bushings minimize scheduled maintenance. High carbon SAE 1050 steel gears to resist wear and last longer. Mounting hardware sold separately.
1500 Pound Capacity
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
CONTROL BOX MOUNT BRACKET
|
TRAILER COUPLER LOCK
Universal trailer coupler lock
Fits 1-7/8", 2", & 2-5/16" couplers-
manufactured by Reese, Fulton, Valley, Atwood,-
Shelby, Putnam, Hammerblow, Dutton Lainson & UFP
Advanced locking mechanism
Resists picking and prying
Powdered coated finish
379DAT TRAILER COUPLER LOCK
|
GEAR BOX END COVER
|
Rapid mount portable and marine operation with handheld remote control on a 10 foot lead. Built-in carry handle for easy transportation. Low amperage-draw gear box. Pull line rating of 6,000 pounds rolling load and 2,000 pounds rated line pull.
Cap Lb=6,000
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The Smittybilt X2O Winches have been enhanced in almost every area for increased performance and trouble free operation. Every X2O winch features a Series Wound 6.6 HP motor that is completely sealed, as well as a 3-Stage Planetary Gear System. The X2O winch features a completely waterproof 500 AMP solenoid pack that can be mounted in 2 different locations, depending on your application needs. They also include a new controller that can be wired to the winch or unplugged for trouble-free wireless operation. The X2O also features optimized gear ratios that deliver lightning-fast line speeds. And finally, all X2O winches are covered by the Smittybilt Lifetime Warranty, providing peace of mind as well as unparalleled performance. With all of these features, you can count on the X2O winch to be there every time, in every situation.
|
Replaceable latching hardware for longer service life. Strong in both static and dynamic loading conditions. Hinged ball socket for easy hook up. Clear, visual indication of proper closure. Number 8 A-Frame tongue mount, low profile, SAE size III, 2B styl
e, 16" overall length, 5,000 lb. gross trailer weight. High strength steel for 50 degree trailer tongue.
CLASS III - 5,000-LB GVW
2 Inch Ball
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The only receiver lock that will open with your EARLY MODEL GM key, BOLT Receiver Locks feature a solid zinc core, automotive grade cylinder with patented 6 plate-tumbler sidebar to prevent picking and bumping, a stainless steel lock shutter to keep out dirt and moisture, and a rugged jacket and cap. BOLT Receiver Locks have a Stainless Steel 5/8? diameter shaft (fits class 3, 4 Hitch) and are made in the USA. Limited lifetime warranty.
|
This receiver hitch kit from Rugged Ridge includes a durable powder-coated 2-inch receiver hitch, wiring harness, hitch pin, and a heavy-duty D-shackle assembly which offers a sturdy attachment point for the rear of your Jeep. The D-shackle has a 9,500lbs pulling capacity, and is the perfect accessory for helping your buddy get unstuck. 5 year limited warranty.
|
XRC3 SPARE PARTS
|
This heavy-duty D-ring fits into any 2" receiver. Its rated up to 10,000lbs pulling capacity on straight pulls. The D-ring is zinc coated cast steel with a 3/4" pin.
|
CONTROL BOX COVER
|
This red winch cable stopper from Rugged Ridge prevents painful hand injuries by stopping the hook from being pulled through the fairlead.
Red
For use with steel cable or synthetic rope
Fits most off road/UTV winches
|
The new Smittybilt XRC winches have been thoroughly updated with heavy-duty features for enhanced performance and durability. Ranging from 9,500lb to 17,500 lbs capacities, Smittybilt's XRC Series winches can handle any situation you can get into. Every XRC winch features a Series Wound 6.6 HP motor and a 3-Stage Planetary Gear System with revised gear ratios for increased pulling power and lightning-fast line speeds. Every winch is finished in a rugged UV-Resistant matte black coating with stainless steel hardware and oversized aluminum crossbars to provide you with a great looking system that will last you a lifetime. Every XRC winch includes a heavy duty winch controller, four-way roller fairlead, forged steel tow hook, and a redesigned solenoid box that can be mounted in 3 different positions for maximum versatility. If you're looking for a winch equipped with a synthetic winch rope, look to the XRC Comp Series for the ultimate in pulling power and performance. A Smittybilt XRC winch is a complete recovery system with the muscle and reliability to bail you out of any situation.
|
This powerful 2,000LB winch comes standard with more features and accessories than most winches in its class. A 1.0 horse power motor with a 3 stage planetray gear system with a 153:01 gear ratio delivers fast line speed with or without load. Internal contactor built into winch.
Rated Line Pull: = 2000 lbs
Voltage: = 12V
Motor: = 1.0 HP
Remote Control: = 11 ft. Lead
Gear Ratio: = 153:1
Size: = 11.25 in. x 4 in. x 4.1 in.
Weight: = 12 lbs.
Wire Rope: = 49 ft. of 5/32
Fairlead: = Roller
Winch Type: = Electric
|
Converts Receiver into Concealed Vault! Great for outdoor activities where keys are a hassle or can become lost Secure, concealed key storage that will not fall off like magnetic key holders How to use
Inside the box
|
|
|
|
|
Copyright © 1999-2018 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |