Cross Cut Panel Saw Accessory - Full Mid-Fence Cross Cut Panel Saw Accessory - Full Mid-Fence
Online
$350.00 for Each
Mfr PN: MDFC

• Prevent back strain by cutting smaller pieces at waist level.
• All steel construction v No warping or splintering!
• Shelf easily snaps on and off.

Online
$350.00 for Each
Mfr PN: MDFC

Cross Cut Panel Saw Accessory - Floating Router Plate Cross Cut Panel Saw Accessory - Floating Router Plate
Online
$400.00 for Each
Mfr PN: FLTR

• Floating platform generates uniform dados even on bowed or twisted material.
• Fits on all current Saw Trax models.
• Universal design accommodates most router motors.
• This set up allow the router to follow the contours of the sheet, giving consistent dado even on bowed or warped material.
• Router motor not included.

Online
$400.00 for Each
Mfr PN: FLTR

Cross Cut Panel Saw Kit - 52-inch Panel Saw Kit Cross Cut Panel Saw Kit - 52-inch Panel Saw Kit
Online
$700.00 for Each
Mfr PN: 52KT

• They offer the shop or home owner an accurate and affordable means of sizing large sheets of material
• You get the same accuracy, convenience and quality of a commercial panel saw and panel router machine at a fraction of the price.
• The panel kits provide the guide tubes, guide tube brackets and our carriage with the U-bolt style bearings. You build your own frame. You spend a fraction of the price of the full panel saw but still get the accuracy and convenience of an industrial panel saw or panel router.

Features:
• Super strong 1/8" wall steel guide tubes.
• Universal carriage that can easily attach your saw. Router inserts are available.
• Guide tube support brackets that are powder coated.
• Bolt attaching kit.

Includes:
• Assembled Carriage
• Guide Tubes
• Mounting Hardware
• Building instructions
• Universal saw insert with clamps
• Floating router insert available

Online
$700.00 for Each
Mfr PN: 52KT

Cross Cut Panel Saw Accessory - Full Builder's Extensions (Set of 2) Cross Cut Panel Saw Accessory - Full Builder's Extensions (Set of 2)
Online
$350.00 for Each
Retail $380.00
Mfr PN: BLEXT

• Add 8 Steel Covered Material Rollers for the 2000 or 3000 Series
• Set includes two 28" fence extensions
• Extends Compact wheel base to 10 feet
• Easily removed for storage or transport
• Perfect for taking to the jobsite with a Compact machine & Hitch Carrier

Online
$350.00 for Each
Retail $380.00
Mfr PN: BLEXT

Cross Cut Panel Saw Accessory - 56-inch Flip Stop Cross Cut Panel Saw Accessory - 56-inch Flip Stop
Online
$290.00 for Each
Mfr PN: FSTP56

• Perfect for use with longer sheets or where cutting exact lengths repetitively.
• Can be placed on either the right or left side of machine.
• Includes specialized aluminum extrusion, tape and two adjustable stops.

Online
$290.00 for Each
Mfr PN: FSTP56

Cross Cut Panel Saw Accessory - 96-inch Flip Stop Cross Cut Panel Saw Accessory - 96-inch Flip Stop
Online
$350.00 for Each
Mfr PN: FSTP96

• Perfect for use with longer sheets or where cutting exact lengths repetitively.
• Can be placed on either the right or left side of machine.
• Includes specialized aluminum extrusion, tape and two adjustable stops.

Online
$350.00 for Each
Mfr PN: FSTP96

Cross Cut Panel Saw Accessory - Spring Hold Down 52-inch Cross Cut Panel Saw Accessory - Spring Hold Down 52-inch
Online
$143.00 for Each
Mfr PN: SPH52

• Standard on Sign Makers Package
• Holds thinner materials against frame for more material support.
• Recommended for materials 1/4" or less.
• Does not have to be removed when cutting thicker materials.

Online
$143.00 for Each
Mfr PN: SPH52

Cross Cut Panel Saw Accessory - Spring Hold Down 64-inch Cross Cut Panel Saw Accessory - Spring Hold Down 64-inch
Online
$165.00 for Each
Mfr PN: SPH64

• Standard on Sign Makers Package
• Holds thinner materials against frame for more material support.
• Recommended for materials 1/4" or less.
• Does not have to be removed when cutting thicker materials.

Online
$165.00 for Each
Mfr PN: SPH64

Cross Cut Panel Saw Accessory - Spring Hold Down 76-inch Cross Cut Panel Saw Accessory - Spring Hold Down 76-inch
Online
$176.00 for Each
Mfr PN: SPHD76

• Standard on Sign Makers Package
• Holds thinner materials against frame for more material support.
• Recommended for materials 1/4" or less.
• Does not have to be removed when cutting thicker materials.

Online
$176.00 for Each
Mfr PN: SPHD76

Cross Cut Panel Saw Accessory - Steel Sleeve for Material Roller (Set of 18) Cross Cut Panel Saw Accessory - Steel Sleeve for Material Roller (Set of 18)
Online
$200.00 for Each
Mfr PN: SRS

• Standard on the 2000 & 3000 Series Panel Saw
• Recommended for high production facilities and steel fabricators
• Makes material rollers virtually unbreakable
• Steel sleeves fit over our traditional material rollers
• Plastic Roller & Hub not included

Online
$200.00 for Each
Mfr PN: SRS

DW7450 TABLE SAW STAND DW7450 TABLE SAW STAND
Online
$79.41 for 1 EA
Mfr PN: DW7450
TABLE SAW STAND Saw stand for DW 745 DeWalt table saw Folds flat for easy storage and transport Heavy-duty tube steel construction Maximizes durability under load Integral support bar hardware holes secure- the saw to the stand Includes: hardware bag DW7450 TABLE SAW STAND
Online
$79.41 for 1 EA
Mfr PN: DW7450

Cross Cut Panel Saw Accessory - Beam Saw Kit (Circular saw and table not included) Cross Cut Panel Saw Accessory - Beam Saw Kit (Circular saw and table not included)
Online
$1357.55 for Each
Retail $1429.00
Mfr PN: BSK

• Provides a 6 inch depth of cut with a cross cut capability of 55 inches.
• Accurate and affordable means of sizing thick sheets of material
• The panel kits provide the guide tubes, guide tube brackets and our carriage with sealed roller bearings. You build your own frame. You spend a fraction of the price of the full panel saw but still get the accuracy and convenience of an industrial Beam Saw.
• REQUIRES MAKITA 5402 NA CIRCULAR SAW

Features:
• Super strong 1/4" wall steel guide tubes.
• Guide tube support brackets that are powder coated.
• Bolt attaching kit.

Includes:
• Assembled Carriage
• Guide Tubes
• Mounting Hardware
• Building instructions

Makita saw not included in pricing of kit.

Online
$1357.55 for Each
Retail $1429.00
Mfr PN: BSK

Cross Cut Panel Saw Accessory - Frame Dust Collection Upgrade (4 inch hose not included) Cross Cut Panel Saw Accessory - Frame Dust Collection Upgrade (4 inch hose not included)
Online
$130.00 for Each
Mfr PN: IDPL

• If dust collection is an issue in your shop, this is something you need to get.
• The bottom of the frame includes an addional port. As the dust falls down to the bottom, the additonal port draws dust away.
• Includes 4 inch Port, Adapter, & Additional dust guards
• 4 inch hose or vacuum not included.

Online
$130.00 for Each
Mfr PN: IDPL

Cross Cut Panel Saw Accessory - Panel Saw Laser Line Cross Cut Panel Saw Accessory - Panel Saw Laser Line
Online
$200.00 for Each
Mfr PN: PSLA

• Set to illuminate cut line of your circular saw or knife cutter insert.
• Great for trimming prints in the sign industry.
• Uses standard batteries found locally

Online
$200.00 for Each
Mfr PN: PSLA

Cross Cut Panel Saw Accessory - Spring Hold Down 100-inch Cross Cut Panel Saw Accessory - Spring Hold Down 100-inch
Online
$220.00 for Each
Mfr PN: SPHD100

• Standard on Sign Makers Package
• Holds thinner materials against frame for more material support.
• Recommended for materials 1/4" or less.
• Does not have to be removed when cutting thicker materials.

Online
$220.00 for Each
Mfr PN: SPHD100

Cross Cut Panel Saw Accessory - Spring Hold Down 88-inch Cross Cut Panel Saw Accessory - Spring Hold Down 88-inch
Online
$209.00 for Each
Mfr PN: SPHD88

• Standard on Sign Makers Package
• Holds thinner materials against frame for more material support.
• Recommended for materials 1/4" or less.
• Does not have to be removed when cutting thicker materials.

Online
$209.00 for Each
Mfr PN: SPHD88

Cross Cut Panel Saw Accessory - Wall Mounting System Cross Cut Panel Saw Accessory - Wall Mounting System
Online
$40.00 for Each
Mfr PN: WMS

• This system will allow you to permanently mount the panel saw to the wall.
• Includes mounting brackets and hardware.
• Must remove folding stand in order to secure saw to the wall.

Online
$40.00 for Each
Mfr PN: WMS

FOLDING LEG STAND FOR DW745 FOLDING LEG STAND FOR DW745
Online
$88.26 for EA
Retail $96.75
Mfr PN: DW7451/DW7450
Folds for easy storage. Portable, lightweight and durable. Fits No.DW745 (SKU 281.2428) jobsite table saw. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$88.26 for EA
Retail $96.75
Mfr PN: DW7451/DW7450

TABLE SAW 10INCH 15AMP W/STAND TABLE SAW 10INCH 15AMP W/STAND
Online
$216.14 for EA
Mfr PN: GTS10SB
15 amp motor. 4800 rpm. Extra large 24" x 20" die-cast aluminum table. Self-aligning rip fence automatically locks front and rear. Rips material up to 9-1/2" wide. Tool-free installation of blade guard and anti-kickback pawls. Oversized sliding miter gaug e for miter cuts from 0-45 degrees. Bevel cut from 0-45 degrees. Rocker on/off switch. Optional sliding extension table expands rip capacity to 24". Includes: 40T Carbide-Tipped blade and heavy duty metal stand. Weighs 55 lbs. 5/8" Arbor This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$216.14 for EA
Mfr PN: GTS10SB

CARTRIDGE ACTIVATION 2 SHOT CARTRIDGE ACTIVATION 2 SHOT
Online
$104.04 for EA
Retail $114.95
Mfr PN: TS1020
Exclusively designed for use with the Bosch GTS1041A REAXX 10 inch jobsite table saw (8916587). The cartridge is part of the saw's Active Response Technology, which imparts a low-voltage electrical signal onto the blade. The signal alters upon contact wit h the user's skin, triggering a chemical reaction in an activation cylinder similar to the deployment of an airbag in an automobile. In this case, instead of deploying and airbag, the chemical reaction fires a piston that pushes against the drop arm. This action rapidly forces the saw blade down and away from the operator, mitigating serious user injury. Each cartridge allows for two activation s before replacement is needed. Additional onboard cartridge storage is located onboard the tool. After activation, the system can be reset in less than 60 seconds. Each of the dual-activation cartridges has been designed to have a 20 year shelf life and each has an expiration date printed on it. The dual-activation cartridge works with standard 10 i nch fine finish and construction-grade blades and stacked dado blades. Includes 1 Dual-Activation Cartridge. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$104.04 for EA
Retail $114.95
Mfr PN: TS1020