|
TRUE AMERICAN(R) WOOD SPLITTING WEDGE
Tool features a square head for striking and -
driving into logs or wood pieces
Made of drop forged heat-treated steel
The ultimate in durability and safety
Use with a sledge hammer or maul to -
drive into wood
2-1/2"W x 1-3/4"H x 5-1/4"L
Proudly made in the USA
1113091900 4 LB SPLIT WEDGE
SIZE:4 Lb.
COLOR:Black
|
Chop enough wood for the winter in single weekend with the Sportsman Series Gas Powered Kinetic Log Splitter. Harnessing the power of kinetic energy, the Sportsman Log Splitter cycles up to 10 times faster than hydraulic machines, so you can cut more wood in less time. With a super fast cycle time of just 2 seconds, it is possible to cut a full cord of wood in under an hour.
In addition to saving time, the Kinetic Log Splitter will also save you money. By utilizing the momentum of the 15 pound flywheel and a 7 inch steel splitting wedge, the Log Splitter generates the equivalent power of a 10 ton hydraulic unit, burning less fuel, and without the maintenance and hassle of hydraulic lines. That kind of power can easily handle the logs of hardwood species as well as pine and cedar. Ideal for folks with large wooded properties, the Gas Log Splitter horizontally splits logs weighing up to 100 lbs, 20 inches long, and 13.75 inches in diameter, for the fireplace, wood burning stove, and outdoor fire pit. With two-handed operation for safety, and an easy pull recoil start 2.7 horsepower engine. Easily move the Kinetic Splitter into position on the two 8-inch hard rubber tires. Take the Log Splitter to the woodpile, and not the other way around, saving sore muscles and lots of time. Makes chopping up wood quicker, easier, and safer Utilizes kinetic energy for a faster cycle time, cut more wood in less time Uses less fuel than hydraulic models with faster and easier operation Easy pull recoil start Two handed operation for safety Two 8 by 1.75 inch hard rubber wheels included for mobility Noise level: 104dB with no-load Cycle time of approximately 2 seconds 2.7 HP, 4-stroke air-cooled, OHV, 94cc engine, torque 2.95ft-lb Kinetic motion equivalent to 10 tons of hydraulic power Maximum log length: 20 inches, Maximum log diameter: 13.75 inches, 100 lbs max weight capacity Auto return, flywheel weighs 15 lbs with 600 ROM Runs on unleaded gasoline with 0.42 gallon fuel tank Low oil shutdown, engine oil capacity: 12 ounces SAE 10W-30 oil 7 inch steel splitting wedge Unit is not towable, only operates in a horizontal position Assembled size: 53 inches long x 31 inches high x 11.5 inches wide Assembly required EPA approved, Non-CARB compliant/Not for sale in California |
No bending over to pick up half split logs. Catches half the log while you split the other half. Attaches to log splitter beam in minutes.
Size In=19.7 x 18.5
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
REPLACEMENT BLADE FOR #11-543 SPLITTER
Designed to cut pavers, retaining wall units, and blocks
Cutting blade is 161/8" wide
|
Provides a nice split time of 5-7 seconds due to the dual action splitting technique. No waiting for the wedge to return, it's ready instantly to split another log after you have completed your split. Powered by a Honda GC-160 engine. Fast and powerful. L
ightweight and easy to maneuver. Ideal homeowner log splitter with 20 tons of splitting power. 8" high carbon steel 2-way splitting wedge. 4" x 24". Road towable 4.80 x 8" wheels and tires. 28" working height. 3 gallon capacity hydraulic system (tank, cyl
inder and hoses). Weighs 360 lbs.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Honda GX270 engine (270cc). Has an average 14 second cycle time, which is a great combination of speed and power. Log Cradle catches falling wood, saving you from bending over and picking up split wood off the ground and splitting again. 25" opening. 2" c
oupler and safety chains. 9 gallon capacity hydraulic system (tank, cylinder and hose). Industrial I-Beam Structure. Detent, Auto return Safety control valve. High speed 4.8 0 x 8" wheels and tires. Weighs 700 lbs.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Honda GC160 (160cc) engine. Horizontal/vertical operation. Log cradle catches falling wood saving you from bending over and picking up split wood off the ground and splitting it again. 4 stage filtration system. Industrial I-Beam. Heavy-duty hydraulic sys
tem. 8" high carbon steel splitting wedge. 4" x 24" trunnion mount, 2" rod cylinder. 25" log opening. 2" coupler and safety chains. 30" working height. 8 gallon capacity tank. High speed 4.80 x 8 inch wheels and tires. Weighs 650 lbs.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Comes standard with the Honda GC190 engine. The log splitter has an average 14 second cycle time, providing a combination of speed and power. Log Cradle catches falling wood saving you from bending over and picking up split wood off the ground and splitti
ng again. 8" High carbon steel splitting wedge. 5" x 24" trunnion mount, 2" rod. 25" log opening. 2" coupler and safety chains for towing. 30" working height. 8.5 gallon capacity tank, cylinder and hoses. High speed 4.80 x 8 inch wheels and tires. Orange
powder coated color. Weighs 650 lbs.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
REPLACEMENT BLADE FOR #11-410 SPLITTER
Hardened steel cutting blades have 3 cutting edges and can be quickly changed on the job site
|
160 cc Honda GX engine. 6" heavy-duty formed steel beam. Heavy duty 4 bolt trailer hubs for towing. E-Z lift hinge one hand lift to vertical operation. Heavy duty steel fenders. Heavy duty crank down wheel jack for easy moving. Spring loaded vertical and
horizontal rail locks. High pressure hoses on both the pressure and return side. 2" hitch coupler. Log Dislodger standard. Heavy duty 2 x 3 box tube tongue. Long lasting high gloss power coat finish. 9.5 gallon Hydraulic system total. 4.80 x 8.00 highway
rated tires. 4" x 24" clevis type, 1.75" rod cylinder. 25" log opening. Weighs 660 lbs.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
|
Copyright © 1999-2019 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |