GOODMAN GAS VALVE FOR ONE STAGE FURNACE - HONEYWELL (0151M00013) GOODMAN GAS VALVE FOR ONE STAGE FURNACE - HONEYWELL (0151M00013)
Online
$106.38 for Each
Retail $159.57
Mfr PN: B1282628S
Stock: 67
| Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details | Professional installation recommended | Goodman OEM 1-stage Gas Valve
Online
$106.38 for Each
Retail $159.57
Mfr PN: B1282628S
Stock: 67

GOODMAN® 4.0-5.0 TON CASED INDOOR COIL WITH INTERNAL TXV FOR 24.5 IN. FURNACE CABINET GOODMAN® 4.0-5.0 TON CASED INDOOR COIL WITH INTERNAL TXV FOR 24.5 IN. FURNACE CABINET
Online
$639.09 for Each
Retail $958.63
Mfr PN: CAPT4961D4
Stock: 4
Standard Features: | All-Aluminum evaporator coil | Optimized for use with R-410a refrigerant | Factory-installed thermal expansion valves for cooling and heat pump applications | Check flowrator for cooling and heat pump applications | 21” depth for easier attic access | Split seam front for easy access | Foil-faced insulation covers the internal casing to reduce cabinet condensation | Galvanized, leather grain-embossed finish | Rust resistant, thermoplastic drain pans featuring a low water-retention design | DecaBDE-free thermoplastic drain pan with secondary drain connections | UV-resistant drain pan | AHRI certified; ETL listed
Online
$639.09 for Each
Retail $958.63
Mfr PN: CAPT4961D4
Stock: 4

Lyman Big Dipper Casting Furnace (115V) Lyman Big Dipper Casting Furnace (115V)
Online
$50.87 for EA
Retail $67.98
Mfr PN: 2800350
Stock: 0
The Lyman Big Dipper Furnace 110 Volt is an economical casting furnace that is packed with great features. This furnace is perfect for the beginning caster looking for a great value to learn the tricks of the trade or experienced casters looking for a 10 lb. pot for blending alloys and casting bullets. This furnace features a 10 lb. capacity, fast heat-up time, thermostat control to +/- 10 degrees, easy on-off temperature dial, compact non-tip design and wide mouth for easy ladling.

Features:

- Capacity: 10 lb.
- Voltage: 110 Volt
- Material: Aluminum
- Features: Thermostat control to +/- 10 degrees
- Function: Designed for melting and blending lead alloys for bullet casting
- Notes: Wide mouth for easy ladling, non-tip design
Online
$50.87 for EA
Retail $67.98
Mfr PN: 2800350
Stock: 0

GOLIATH FURNACE SECONDARY DRAIN PAN, 34X64 IN. GOLIATH FURNACE SECONDARY DRAIN PAN, 34X64 IN.
Online
$97.21 for Each
Retail $145.82
Mfr PN: 96222
Stock: 0
GOLIATH SECONDARY DRAIN PAN
Online
$97.21 for Each
Retail $145.82
Mfr PN: 96222
Stock: 0

MRCOOL 2 Ton BTU Multi-Positon 14 MRCOOL 2 Ton BTU Multi-Positon 14
Online
$305.06 for 1
Mfr PN: CAPMP2414ALA
Stock: 0
MRCOOL 2 Ton Multi-position Evaporator Coil 14" Wide Model CAPMP2414ALA The MRCOOL CAPM coil series is designed with performance in mind, built to surpass your wildest expectations for how a behind-the-curtain indoor cooling system component should operate. The updated A-Coil design offers low pressure drops to enhance system performance and airflow characteristics, with copper tubing running throughout a labyrinth of aluminum fins, acting as a massive cooling radiator for your indoor air. Our coils contain refrigerant-specific factory-installed TXVs to keep up with rigorous high SEER rating demands. The coils may be installed in either upright or horizontal positions, and sport double durable condensate pans, one for vertical application and one for horizontal applications, designed in a recently developed (fiberglass reinforced thermoset polyester˙ material for unsurpassed pan strength. The condensate pans are sloped to ensure proper drainage and ambient moisture removal. These coils use sweat connections for leak-free operation. The side mounting tubing to the coil slabs allows for easy cleaning and servicing of the coils as well as easy access to the TXV. The CAPM coils meet or exceed burst pressure of 2100 psi which is at least three to five times the amount of pressure they will see in actual application, significantly reducing the risks of pinpoint leaks and allowing R410A refrigerant to be safely used. The case comes with factory-installed UV knockouts for quick and easy installation of UV lights, which would destroy any hope of biological baddies taking up residence in your coil or ducts. All MRCOOL coils come with a (split delta plate˙ for easy, quick access to the coil for service and cleaning. Once the door is removed, the coils are removable from the front of the unit without use of any tools. This coil is easily cleanable with NU-Calgon no rinse coil cleaner. MRCOOL CAPM coils may be used with both the MRCOOL air conditioner and heat pump lines. Our MRCOOL coils come with a 10 years limited parts warranty so long as it is installed by an HVAC professional and is registered on the MRCOOL website
Online
$305.06 for 1
Mfr PN: CAPMP2414ALA
Stock: 0

MRCOOL 2 Ton BTU Multi-Positon 17.5 Evaporator A-Coil MRCOOL 2 Ton BTU Multi-Positon 17.5 Evaporator A-Coil
Online
$287.68 for 1
Mfr PN: CAPMP2417ALA
Stock: 0
MRCOOL 2 Ton Multi-position Evaporator Coil 17.5" Wide Model CAPMP2417ALA The MRCOOL CAPM coil series is designed with performance in mind, built to surpass your wildest expectations for how a behind-the-curtain indoor cooling system component should operate. The updated A-Coil design offers low pressure drops to enhance system performance and airflow characteristics, with copper tubing running throughout a labyrinth of aluminum fins, acting as a massive cooling radiator for your indoor air. Our coils contain refrigerant-specific factory-installed TXVs to keep up with rigorous high SEER rating demands. The coils may be installed in either upright or horizontal positions, and sport double durable condensate pans, one for vertical application and one for horizontal applications, designed in a recently developed (fiberglass reinforced thermoset polyester˙ material for unsurpassed pan strength. The condensate pans are sloped to ensure proper drainage and ambient moisture removal. These coils use sweat connections for leak-free operation. The side mounting tubing to the coil slabs allows for easy cleaning and servicing of the coils as well as easy access to the TXV. The CAPM coils meet or exceed burst pressure of 2100 psi which is at least three to five times the amount of pressure they will see in actual application, significantly reducing the risks of pinpoint leaks and allowing R410A refrigerant to be safely used. The case comes with factory-installed UV knockouts for quick and easy installation of UV lights, which would destroy any hope of biological baddies taking up residence in your coil or ducts. All MRCOOL coils come with a (split delta plate˙ for easy, quick access to the coil for service and cleaning. Once the door is removed, the coils are removable from the front of the unit without use of any tools. This coil is easily cleanable with NU-Calgon no rinse coil cleaner. MRCOOL CAPM coils may be used with both the MRCOOL air conditioner and heat pump lines. Our MRCOOL coils come with a 10 years limited parts warranty so long as it is installed by an HVAC professional and is registered on the MRCOOL website
Online
$287.68 for 1
Mfr PN: CAPMP2417ALA
Stock: 0

BEACON MORRIS BRT SERIES UNIT HEATER 30K DIRECT SPARK IGNITION BEACON MORRIS BRT SERIES UNIT HEATER 30K DIRECT SPARK IGNITION
Online
$734.77 for Each
Retail $1102.16
Mfr PN: BRT030N
Stock: 0
The Beacon/Morris Model “BRT” Low Profile gas-fired unit heater is a highly efficient, extremely versatile product. These propeller units combine the latest tubular heat exchanger technology with a unique single-orifice burner system.| 30,000 - 120,000 BTU for residential use | 82 - 83% efficient | Aluminized steel heat exchanger | Direct ignition with 100% lockout | Single stage combination gas valve | Factory set for Natural Gas, Propane conversion kit included | 115/1/60 supply voltage | 115 volt fan motor with internal overload protection | High temperature limit control | Pressure switch to verify vent flow | Flame rollout safety switch | Factory installed power venter | 24 volt control voltage transformer | Individually adjustable horizontal louvers | 2 and 4 point suspension | A.G.A. ratings for altitudes to 2,000ft. Above 2000 ft, de-rate by orifice change, 4% for each 1,000 ft above sea level. C.G.A. ratings for altitudes units (2,000-4,500 ft) are de-rated by 10% of maximum input | Gas connection for propane is 1/2" for all sizes. Sizes shown are for gas connection to a single stage valve: NOT gas supply line size | Field convertible to separated combustion We do NOT provide any installation services nor removal of old appliances. Delivery for large items is curbside only.
Online
$734.77 for Each
Retail $1102.16
Mfr PN: BRT030N
Stock: 0